Jump to content
SAU Community

Sau Vic 2013 Motorsport Championship Round 1 - Pi 2Nd Feb


Recommended Posts

So the first round of the MS championship will be PI on the 2nd Feb with the wrx club.

This will be the first weekend open after the resurfacing so will be a great day.

entry

https://secure1.ilisys.com.au/wrxc/motorsports/Introduction.php

Sup Regs

http://www.wrx.com.au/ms/Current_Supp_Regs.pdf

Full championship season will be announced soon

  • Replies 97
  • Created
  • Last Reply

Top Posters In This Topic

ya just got posted up, first post has direct links to entry and sup regs.

Hope to ahve the 1st half of season posted next week.

some delays due to calder messing things up and waiting of Nats dates

but looking to be a good one.

hopefully will be out there for the last couple rounds

Wow $240 for a 75db day, whereas the VSSC day is $215 for a 95db day (if you enter two weeks prior) :wacko:

Hi Martin, for next few events, might want to add a note on front page highlighting that WRX will send entry details with disclaimer and scrutineering sheet to be completed by entrant.

entered

any premeets to cruise up there before?

generally not, as ppl coming from everywhere, some towing some driving

more often come back as a "group" stop at maccas or similar.

i'm planning on coming up and spectating a bit during the day and getting some pics in.

generally not, as ppl coming from everywhere, some towing some driving

more often come back as a "group" stop at maccas or similar.

i'm planning on coming up and spectating a bit during the day and getting some pics in.

fair enough

how come your not entering this round?

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Fark what are the changes of that snapping like that, clean. Nek minnit, custom radiator goes in, with built in oil cooler like those discontinued PWR ones from yesterdeacades ago
    • I thought I'd do a write up on an auto transmission fluid change for a the nissan 7 speed Automatic. At some stage the genius engineers decided that the fluid in the trans was "for the life of the transmission", (which seems kind of self supporting to me) and removed the dip stick and fill tube (funnily enough there is still a casting for it). Anyway, for this job you do need 2 specialist tools in addition to regular hand tools, jack and good chassis stands. You need a way to pump fluid up to the transmission; I got one of these but there are plenty of other options: https://www.ebay.com.au/itm/364584087070 Don't trust the generic listing though, it does not come with the required adapter for the Nissan 7 Speed. You need one of these, can't do the job without it: https://navarapart.com.au/product/genuine-nissan-patrol-y62-d23-np300-navara-re7-dipstick-fill-connector1 You need a heap of compatible transmission oil. Could be Nissan, could be anything else rated for Nissan Matic S. You need at least 10 litres, I had 15 to give it a better flush... Also, you need some biiig oil catch trays, at least one of these, or bigger if possible (volume was fine, size was very marginal): https://autobarn.com.au/ab/Autobarn-Category/Tools-%26-Garage/Specialty-Tools/Oil-Service/Garage-Tough-Oil-Drain-Pan-Black-16L---GT1068/p/TO03191 Finally, a measuring jug is very useful if your pump does not have volumes marked on it, I got a 6l one: https://www.repco.com.au/oils-fluids/fluid-accessories/measuring-jugs/penrite-measuring-jug-6l-pmj006/p/A5322648 Oh, and gloves.....this stuff is horrible (not as bad as diff oil, but getting there) ....First, jack up your car.....
    • So I mentioned the apprentice, @LachyK helped take the bonnet off. We just undid the nuts on the hinges and unclipped the gas struts, then pulled the bonnet back a little as the front was catching on the front bar.  I had a good look at everything today and have removed the rams, repaired/reset the hinges and bolted it back together like it never happened. I'll do a separate write up on the repair, and I also removed the poppers from the Fuga today too to save grief down the road.....as said above it is at least $5k to repair retail. I'm also happier about my ability to prepare a race car, and less happy about Nis-nault's engineering (I can hear @GTSBoy sAfrican Americaning) because the top hose of the radiator didn't slip off.......it snapped clean off. By practice I put the hose clamp hard up against the flare on a neck to make it least likely to ever move (thanks @Neil!). I guess that puts a little more pressure on the end of the pipe as it is further away from the rad, but still, that is pretty shit. I've put it back on for now as there was a fair bit of neck still there, but obviously there is no lip on the neck any more so I don't think I'll track it again until I have a new rad. Speaking of which....more research required. It looks like Koyo makes a standard size radiator in ally which I'll grab in the meantime, but I really want something thicker so might have to go custom in the medium term (ouch) Coolant still needs a refill and I have the pressure tester on it over night, but other than a wash down of the engine bay it seems alright. And @MBS206 noted something noisy on the front of the engine and I think I agree....time for a new accessory belt and tensioners I think.
    • our good friends at nismo make a diff for it, I have one (and a spare housing to put the centre in) on the way. https://www.nismo.co.jp/products/web_catalogue/lsd/mechanical_lsd_v37.html AMS also make a helical one, but I prefer mechanical for track use in 2wd (I do run a quaife in the front, but not rear of the R32)
×
×
  • Create New...