Jump to content
SAU Community

Recommended Posts

My Mechanic has just put in the new clutch and M & S cylinders but when testing the new clutch the pedal box cracked....

he is going to weld it up and put a strengthening bar onto it for now..

Any one upgraded their pedal box lately??

If so what/where/brand would you suggest???

Cheers :)

My Mechanic has just put in the new clutch and M & S cylinders but when testing the new clutch the pedal box cracked....

he is going to weld it up and put a strengthening bar onto it for now..

Any one upgraded their pedal box lately??

If so what/where/brand would you suggest???

Cheers :)

Nismo do a reinforced clutch peddle mount.

GSL are the goods and remsa pads are getting a good rap from them lately

had remsa pads on for over a year now, even used on a track day, awesome street/performance pad

How u finding the dust with the remsa's ?

I find it average, but no worse than any other pad.

After a fairly long hills drive i get a loud screech coming from the front calipers, doesn't make a noise any other time.

Anyone got some good opinions on a comedy show to see while the fringe is on?

This looks good Luke....Habib & Rocky from Fat Pizza are in it.

Me and the missus are checking this one out Sat night with Shane & Co

http://www.adelaidefringe.com.au/fringetix/the-good-the-bad-and-the-ethnic/fc9f7e75-07ba-4784-b3d7-be563fdf5a17

How u finding the dust with the remsa's ?

I actually find brake dust is quite minimal unless you let it build up n don't wash your car for a couple of weeks

As for noises, I hear none. Perfectly quiet, even when cold

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Order for the 2025 model R35 GT-R were accepted from 3rd March and 26th August the last order rolled off the production line at the Tochigi plant. Concerning the R35 GT-R replacement, current Nissan CEO Ivan Espinosa said "Nothing has been decided about the GT-R at this time, but we are well aware that everyone is waiting. The GT-R will evolve and reappear in the future. Please be patient until that day comes." Nissan has a lot of issues with management and finances so take Espinosa's words with a big grain of salt. From what discussions I've had and read about here in Japan, not a lot of people are confident about Nissan's future, let alone the next GT-R. 
    • Thanks. We getting some parts along too so he will be solving the speed issue like next week so i will let you know what he came up with.   
    • 21 is explicitly the coils detected as the issue. Is it guaranteed the actual issue? No. Just the ECU thinks it is. When you say rattling, describe it better, get an audio clip as best you can if possible.
    • Yea got me coppers. Bad news is I just put them in and the car still has the light and shakes. I also noticed I hear like rattling coming from the exhaust piping right under me. Does 21 also have a possibility of being O2 sensors?   So, coil packs are good, the harness is good, the MAF is working, and obviously the spark plugs just replaced and working.
    • Make sure you drop the GTT base tune back in, and set your injectors again, this will remove anything playing up with it you may have removed. Possibly lean there as it's normally a fast transient going THROUGH atmospheric pressure, and a turbo motor would then quickly go richer as boost builds. The only worry you MIGHT have is ignition timing, as the DE is higher compression than the DET from memory. But again, you're not in boost, so the DE motor will be a lot more forgiving at atmospheric.   Get Murray, Kinkstahs, and Johnny's input on tuning haltechs, those guys have played with tuning enough in the past to be able to help now you're past the trouble shooting stage of the MAP issue
×
×
  • Create New...