Various R32 Gtr Parts / Wheels Etc

[R32GOJIRA]

Guys and Gals,

I have for sale a set of 4 TE37s in 17 x 9.5" with a +12ish offset (not 100% sure).

They have been resprayed in satin black (were originally bronze as the back side of the face has not been sprayed and you can see it), and they have nismo decals instead of the Rays Engineering and TE37 ones.

All four rims have light rash and a few paint chips on the spokes, as whoever had them before me obviously couldnt drive to save their life, however in saying that, they could be easily repaired.

No dents or buckles, they roll true.

They come free with a set of shagged Toyo R888, as i used them as my track rims.

Had them on my white R32 GTR and it looked tough as.

Will no longer be needing them as doing a brake upgrade and they wont fit inside the rims anymore, so they gotta go.

Price $2000 or best offer.

Im on here daily so PM me with your mobile no. if genuinely interested and ill SMS some pics as i cant download them.

[flyt32]

What state u in?

[R32GOJIRA]

Sorry, should have mentioned in in Wollongong NSW. Will post at buyers expense, but prefer pick up.

[R32GOJIRA]

As title suggests, I have a pair of standard R32 GTR turbos for sale.

Have done about 100xxx kms, minimal shaft play.

Were never taken above standard boost levels.

Asking $300 ono.

In wollongong NSW, will post at buyers expense.

[R32GOJIRA]

I have a standard RB26 head for sale.

Comes complete with all standard internals (cams, valves, springs, gears).

No covers. No cold or hot side, just the head.

Came off my old motor that threw no.6 rod out the side of the block.

Head still looks in good nick, no damage.

Could do with a service as its been sitting around for a few years now.

Was going to do a 26/30 but went in another direction.

This would be perfect for someone wanting a replacement head, or someone wanting to build a little something on the side.

Located in Wollongong NSW. Prefer pick up but will post at buyers expense.

Asking $1000 ono.

[R32GOJIRA]

I have a used set of Accralite 86.5mm forged pistions and balanced standard rods to suit an RB26.

They have done about 25xxx kms.

Came out of my working motor as i had the whole motor rebuilt with new components.

These are one of the lightest aftermarket pistons you can get and are used in the likes of F1 cars.

Extremely strong and durable, great for race applications.

I was running 320kw at all four on 20psi, car was extremely responsive.

Only changed pistons as i went to 87mm with the build.

Located Wollongong NSW. Will post at buyers expense.

Looking for $500.

[R32GOJIRA]

For Sale,

R32 GTR standard front sway bar - used - $100

R32 GTR standard rear sway bar - used - $100

R32 GTR standard front upper arms - used - $100 (with nolathane bushes)

All straight and in good condition.

Located Wollongong NSW. Will post at buyers expense.

[R32GOJIRA]

Have for sale a slightly used Cusco Tension Rod Bar.

This is the adjustable bar that braces the chassis between the mounting points of the tension rods.

Only selling due to not being able to fit it as it interfers with my extended race sump.

$100. Will post at buyers expense.

[R32GOJIRA]

I have a used white R32 GTR bonnet for sale.

Good condition, a few minor stone chips as you would expect from normal driving.

Comes with badge and washer jets.

After $500.

Pick up only. Wollongong NSW.

If you want pics, PM me your mobile no. and i will SMS you pics as i cant upload.

[Frosty]

oh snap....bit to much cash

gl with the sale

[R32GOJIRA]

For sale, a used air con and heater setup for an R32 GTR.

Basically everything under the dash to do with the aircon and heating, including the ducts under the dash and carpet, plus the air con control unit.

Also included are the aircon lines, compressor, radiator and fan from the engine bay.

I think the only two things missing are the heater core (as it was leaking), and the duct that supplies air to the round dash vent on the drivers side (broke during removal).

Also no plugs or looms.

No problems with the rest as they worked perfectly fine.

Would rather sell complete together as i dont want random bits sitting around for ages.

Located Wollongong NSW. Will post at buyers expense.

Looking for $800 ono for the whole lot.

[R32GOJIRA]

You could always throw me an offer. If its close to what im after.... you never know your luck in the big city.

[Guest]

would you sell the heater control unti seperate?

[R32GOJIRA]

If i had enough interest in all other bits and pieces first, id consider it. but as previously posted, would rather sell it all together.

[R32GOJIRA]

TTT

[R32GOJIRA]

TTT

[R32GOJIRA]

TTT

[R32GOJIRA]

TTT

[R32GOJIRA]

TTT

[R32GOJIRA]

TTT