Jump to content
SAU Community

Recommended Posts

Guys ,

I just replaced my alpine speakers in the rear after hearing crackles when pumped up finding the cone had a split in it but since doing that i am now getting an alternator noise which is pissing me off.

Does the atlernator have a condensor on it anymore or are they internal?

Would putting a filter accross the amp (in boot) or headunit work and which one?

I have put my cd on and it still comes through and even not starting the car i can even hear a slightly softened whire which i thought was my amp fan but it may not be..

any ideas would be greatly appreciated

Dazza

Link to comment
https://www.sau.com.au/forums/topic/418053-alternator-whine-through-speakers/
Share on other sites

I'm not to sure about that. But I know I get a small noise through my speakers when I turn lights on etc, its nothing worth worrying about cause you can only notice it when theres nothing playing out of the speakers. Maybe its just something to do with the speakers, From memory the LH rear speaker sits pretty close the the battery terminals (depending on speaker) so maybe your new speakers sit a bit closer then the old ones and this is causing it? Not sure what new speakers you have but if they are the exact same speakers then that would be a bit more confusing.

Guys ,

I just replaced my alpine speakers in the rear after hearing crackles when pumped up finding the cone had a split in it but since doing that i am now getting an alternator noise which is pissing me off.

Does the atlernator have a condensor on it anymore or are they internal?

Would putting a filter accross the amp (in boot) or headunit work and which one?

I have put my cd on and it still comes through and even not starting the car i can even hear a slightly softened whire which i thought was my amp fan but it may not be..

any ideas would be greatly appreciated

Dazza

Car not started and it whines isnt alternator !!

the wires are touching something or pinched

A cooling fan on amp

Can be amp, or radio and you didnt hear it before

Rca's creating inductive noise whine , power cables too close to rca's

rare but speaker wires to close to hi current or switching relay in boot

Bad cap on tweeters can do it but not common

For the other persons problem

A little whine can mean alternator ripple going up

= alternator is dying / battery or wiring issues

Edited by Carbon 34
  • 3 weeks later...

If you have a friend with spare speakers lying around, chuck them in for a day to see if it still does it. It might just be a crap set of speakers. Every manufacturer can have faulty gear from time to time. Most modern electronic gear will either fail in the first 2 weeks, or go for more than 2 years no problems. I hope this helps.

If you have a friend with spare speakers lying around, chuck them in for a day to see if it still does it. It might just be a crap set of speakers. Every manufacturer can have faulty gear from time to time. Most modern electronic gear will either fail in the first 2 weeks, or go for more than 2 years no problems. I hope this helps.

Hmmm no that wouldnt fix it in most cases

Hi There,

Often engine noise can be a few different things a few things to check are:

1. RCA- Use good quality shield type and keep away from the amp power cable and also the vehicles main power looms.

2. Amplifier- Gain on amplifier too high. Often people put the gain too high and this will cause excessive engine noise.

3. Cheap Amplifier- Try using a good quality amplifier or a digital amplifer often will work better then the cheaper ones.

Check these things out.

If all else fails you can use an inline RCA noise filter but these aren't the correct way to fix it and often don't always work. If you do want to try them they are about $15 generally and will plug inline with the RCA's simple fitment.

Hope this helps.

Daniel Gardener

Carbon Car Systems

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The team at OBD2 Australia are pretty good, shoot them an email and ask them. I've dealt with them before for work stuff. I'd be shocked if it didn't work, so long as Consult can activate the ABS. But you might need to use KLine for it which would be the stopper, as I don't think that piece does KLine comms.
    • Yeah and hence my ghetto way of slamming the brakes, get the ABS to cycle, rebleed seems to be a sensible workaround.
    • Hey! Happy to help. Nothing inherently wrong with the adapter, it's more so with Brett Collins himself. He gave me a lot of incorrect information when I was in contact with him and was extremely rude when I challenged him. He stated I could not use any aftermarket twin plate clutches except for his own, not to use the dush shield, bla bla bla and it was all BS.  Collins stated to cut roughly 14mm's off the housing, I took off 15mm to make room for the dust shield. I would confirm with whatever adapter manufacturer you're using. 
    • There's plenty of OEM steering arms that are bolted on. Not in the same fashion/orientation as that one, to be sure, but still. Examples of what I'm thinking of would use holes like the ones that have the downward facing studs on the GTR uprights (down the bottom end, under the driveshaft opening, near the lower balljoint) and bolt a steering arm on using only 2 bolts that would be somewhat similarly in shear as these you're complainig about. I reckon old Holdens did that, and I've never seen a broken one of those.
    • Let's be honest, most of the people designing parts like the above, aren't engineers. Sometimes they come from disciplines that gives them more qualitative feel for design than quantitive, however, plenty of them have just picked up a license to Fusion and started making things. And that's the honest part about the majority of these guys making parts like that, they don't have huge R&D teams and heaps of time or experience working out the numbers on it. Shit, most smaller teams that do have real engineers still roll with "yeah, it should be okay, and does the job, let's make them and just see"...   The smaller guys like KiwiCNC, aren't the likes of Bosch etc with proper engineering procedures, and oversights, and sign off. As such, it's why they can produce a product to market a lot quicker, but it always comes back to, question it all.   I'm still not a fan of that bolt on piece. Why not just machine it all in one go? With the right design it's possible. The only reason I can see is if they want different heights/length for the tie rod to bolt to. And if they have the cncs themselves,they can easily offer that exact feature, and just machine it all in one go. 
×
×
  • Create New...