Jump to content
SAU Community

Recommended Posts

Didn't ignore advice I've taken it in

Fo realz?

What size or ^cc injectors would be good for a 450Kw-550kw max build ???

if people are using 1000cc injectors for 300-ish kW, i'd say 2000?

1000s should do it. 1500 very safe.

1000cc ev14's are the go, or 2000's when you realise you can't make that power safely with 98.

Might go for 800cc sard

epic-jackie-chan-template.png

Didn't ignore advice I've taken it in

Just ignoring the childish comments bit pathetic

Just thought 1000cc+ injectors would of been more than enough Ive always had them on the cards was just seeing what other GTR drivers would suggest !!!!!

Seeing my suicide analogy went down so well with you, how about another...

Let's pretend for a second that you want to kill yourself. If you're a 10 year old kid averaging 40-50kg, you'll need to consume at least 60-70mg of cyanide to induce a histotoxic hypoxia leading to cardiac arrest (FYI this kicks in quicker on an empty stomach; stomach acid is your friend). You've read the threads, you've seen the 10 year old kids pulling this off and bragging about it. But they're lightweights - you're much older, you weigh like 85kg - you can handle your cyanide! So for some reason...and against the advice of those who care about you...you decide a 70kg 15 year old's dose of 105mg might be appropriate for your application. But oh noes...you're still alive. What went wrong? You didn't listen. You're still stuck here asking stupid questions on forums. You know what? Just go with the noose / buy a Toyota Echo, things are less complicated that way.

http://www.nitrostreet.com/injectors.htm

Engine Horse Power = 600HP (Your low range figure was 450kw)

BSFC = 0.65 for Turbo Engines

Number of Cylinders = 6

Injector Duty Cycle = 0.8

= 853.13cc/min

Now that is using 98 octane. If you were to go with E85 which will help you achieve your goals, you'll need approximately 40% more flow in the injectors (as well as a better fuel pump setup to keep up)

Additionally, this is for ENGINE HP, not WHEEL HP which I assume you're after when you said your goal figures.

Thank you god for putting f**kheads like this wanker ^ in the world

Good form

Your a hero behind a keyboard

And you're (note the apostrophe) a kid behind a leaning out engine...I know which I'd rather be. No need to hate, I chose the right injectors for my application.

Seeing my suicide analogy went down so well with you, how about another...

Let's pretend for a second that you want to kill yourself. If you're a 10 year old kid averaging 40-50kg, you'll need to consume at least 60-70mg of cyanide to induce a histotoxic hypoxia leading to cardiac arrest (FYI this kicks in quicker on an empty stomach; stomach acid is your friend). You've read the threads, you've seen the 10 year old kids pulling this off and bragging about it. But they're lightweights - you're much older, you weigh like 85kg - you can handle your cyanide! So for some reason...and against the advice of those who care about you...you decide a 70kg 15 year old's dose of 105mg might be appropriate for your application. But oh noes...you're still alive. What went wrong? You didn't listen. You're still stuck here asking stupid questions on forums. You know what? Just go with the noose / buy a Toyota Echo, things are less complicated that way.

This made me laugh! Love it!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...