Jump to content
SAU Community

Recommended Posts

Hi All,

Sorry if this has been asked a million times before but my M35 Stagea (Auto) is having stalling issues. It seems to pick it's days (ie. it won't stall for 3-4 days, then stall 5-6 times in one day, mostly worse when it's not 100% warmed up). I have replaced the fuel pump and filters, cleaned the throttle body (mostly just dirt, but did appear to have a little oil in it - please not leaky turbo :S?). I am going to attempt to clean the AFM and have a new air filter on it's way. Any other thoughts?

The only other issue that I'm aware of at this stage is the 4WD light coming on from time to time (I'm fairly confident it's just low on ATESSA fluid but just haven't got around to replenishing yet), is there any chance these are related?

Any help would be amazing! Thanks :)

Link to comment
https://www.sau.com.au/forums/topic/418365-m35-stagea-stalling/
Share on other sites

Yes I have, why do you ask?

It's the car I supplied the pump and Filter for. I wanted to have a look at your car running.....If you want and your around Hornsby PM me and I'll have a quick look at the car.

I'm pretty sure I'll be able to diagnose it but I need to see it running.

cheers

Craig

It's the car I supplied the pump and Filter for. I wanted to have a look at your car running.....If you want and your around Hornsby PM me and I'll have a quick look at the car.

I'm pretty sure I'll be able to diagnose it but I need to see it running.

cheers

Craig

Hi Craig,

I would love to come down it's just finding the time. Working full time out west, no where near hornsby haha. I'll see what I can do and give you a call! Thanks for popping up.

Update: Today is the first day I had the check engine light come on, I got ECU codes of 0100 (P0100 Mass or Volume Air Flow Circuit Malfunction) and 0235 (P0235 Turbocharger Boost Sensor A Circuit Malfunction). I cleaned the mass airflow sensor and still the same code appeared (and it stalled at the first test). Starting to get pretty concerned about this, any suggestions anyone? Also have a periodic 4WD error light, could this be related (checked ATTESA fluid and it's full).

:(

  • Like 1

What is the idle speed?

There was a factory recall on the Cam angle sensors that can cause random stalling. (basically it will shut the engine down and light up the check engine light) They put a round silver sticker on the drivers front suspension upright, near the manufature plate. Have a search for my thread about this problem.

Is it possible Hills tried to reset the idle?

Best bet is to visit Craig.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
×
×
  • Create New...