Jump to content
SAU Community

Recommended Posts

Awesome stuff, damn fast groceries, keep up the good work.

How's the drive line holding up ?

We have done our own 4wd auto and it has decent axles. The driveshaft from transfere case to front diff is stock, the rear diff is stock R32 GTR and the front just has a 1.5 way lsd in it.

All seems to love it so far but we havn't really layed into it power wise yet.

Just need to get the 60fts sorted then we should be on for sub 8.50s

Rob

Just need to get the 60fts sorted then we should be on for sub 8.50s

Rob

Are you just using the gas to help it spin up, and get it off the line?

Think you might need some bigger brakes, or convince them to put a bit more tar down :P

Definitely is an average track with all those hills on it :D

Top work as usual by Rob at RIPS.

Only thing left on the car that is Stagea is the shell :D

Lol, you'd be surprised how much is still stock stagea.

All we need now is to get the whole deal into a 1100-1200kg GTR, "on paper" (which is quite often different to reality as we both know) thats a potential of 7.90s @ 180 with the same power we used on the weekend.

Edited by R.I.P.S NZ
  • 3 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Swapped the injectors around and the misfire followed. I went ahead and ordered the Deatschwerks 550cc injectors and am currently waiting for them to be ship and arrive. In the meantime, I've had my Nistune soldered to the ECU. Tested it, and and tried it out with the software. Everything should be prepared for when the injectors arrive.  
    • Yeah they charge a little extra for mods , last year I noted no mods but I did have an exhaust fitted after that so  better to let them know cause these kinds of things can cause the policy to be void if you ever need to claim.
    • Hello, just just bought an 1999 enr34 with a stock rb25neo and I'm looking to upgrade the engine to 500whp I know some basic things but wondering if there are things I'll need to do to upgrade the stock block and all the bits and pieces to achieve this.
    • Thanks everyone for the replies and suggestions. Got the seats out (hoping I could find some existing grommets but no such luck). By tapping and measuring etc. I could figure out where I could drill through if needed. But first I borrowed an inspection camera and managed to go through factory holes in the chassis rail and could see that the captive nut was holding steady which is why it could retighten. So it was indeed a stripped section of thread, so I applied downforce by levering the bolt head with a screwdriver and went slowly back and forth until it came out. Camera helped a lot cos I could monitor that the captive nut was holding tight. Now I just have one very seized main subframe nut to tackle 😅
    • BOVs do have a purpose, if you ever log pressure before and after the throttle body, you will see a spike pre throttle on lift off from a WOT condition. Enough to bend throttle blades / damage e-throttle motors or simple assist in blowing off cooler pipes. FWIW, the above on really applies to those running at least 2 bar of boost. OP shouldn't have an issue, on the other hand, here are some videos of my shit box over a decade ago with some succulent dose with the airbox on and off. That shit box is unrecognisable these days 🫠    
×
×
  • Create New...