Jump to content
SAU Community

Recommended Posts

Car is down over 20kw since the last time it was on this very same dyno. I have replaced a blown head gasket in recent times. Not using coolant, no head gasket symptoms since fixing it.

Same boost, same AFRs, CA18, T28BB.

I have changed the intake cam though, to a CA18DET exhaust cam, I have just gone over the timing again and counted the cogs between the marks, all is spot on as per the FSM, base timing is 10 degree.

It makes more power and more torque than it did previously up until about 4000rpm when it just falls over.

Before it made 180rwkw, now it's struggling to make 160.

I've got acompression tester coming to check and I've just had an idea that maybe the butterflies aren't working, would it make that much difference?

At the moment both cams are set to zero as I hae adjustable gears, don't wanna change them just yet.

Ideas?

Comp test first you have changed a fair bit of things that could be causing it so logic says you did something wrong, I had a issue on my audi and couldn't find it so re did everything I touched and it was all good , my bet is something to do with cam timing but I don't really know those engines but on rb26 a restrictive cat will cost 20 kw easy .

Scott

Is the cam swap a proven drop in upgrade or are you somewhat of a guinea pig working on fair assumptions?


Coz if the later I would assume the physical cam timing needs to be redialed...

Did you use stock gasket or bigger (1.2-1.6mm)

If you used bigger gasket you have lower compression so will need bit more boost to make up for the lost compression!!

Sorry guys, SAU wasn't giving me updates.

I was working on this issue here if you want the full rundown.

http://www.nissansilvia.com/forums/index.php?showtopic=532583&st=0

Comp test was fine. Turns out I had the butterfly actuator connected backwards. I'm fixing that then will see how it runs.

I quadruple checked the cam timing again and it looks fine, the advance one tooth trick is for people who don't have gears but that's where the bulk of the power comes from so I have adjustables.

This is a tried and tested path.

Cheers for the responses.

Edited by ActionDan

In a CA the exhaust cam is 248 duration and 8.3mm lift and it's a direct fit on the intake side as well, which is only 240/7.8.

On It's own, not a huge upgrade, but coupled with adjustable gears it's worth up to 15rwkw mid range and top end.

Especially helpful if you have a larger turbo like I do.

I've just finished putting it all back together. Will post pic tomorrow.

I'm fairly confident it's right because it only fits on that side resting on the pin with the shaft in one position.

With the shaft in any other position other than fully CCW the lever won't attach and be resting on the pin comfortably.

I got under the car with it running and the actuator stayed put, I couldn't spin it up and be under it though but I think it's right now.

Those cam gears look spot on to me too.

I'll test drive it when it's not raining.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...