Jump to content
SAU Community

Recommended Posts

I know it aint much but I'm only saving bits at a time and just getting into modding it.

I know with this amount I could get a FMIC

OR I could get a power fc w/ tune.

My current mods are

R33 Series 1

3" exhaust

turbosmart dual stage boost controller (7psi and 12psi)

turbosmart bov

the car has done 110,000

what would u suggest with this small amount of money, I'm leaning towards the powerfc just to get my fuel consumption down! i'm only getting about 320-340 kms out of a full tank and thats drving like a grandma.

if you can suggest other mods that would be better in this price range or as a starting point that would be great.

Thanks :)

Link to comment
https://www.sau.com.au/forums/topic/42053-what-to-do-with-1500/
Share on other sites

For 1500 you will get a PowerFC and hand controller. What you wont get is a good tune. If you buy the PowerFC, start saving again for the tune which is $450+.
I was thinking that with $200 left over (P/FC's are going for around $1,300) then selling the stock ECU should basically fund the tune.

definately recommend the Front mount for the following reasons.

By dropping the intake temps you will be better protecting the engine (cooler intake temps = less prone to detonation), and gaining power at the same time.

The stock intercooler is not a very nice thing. Especially when you start upping the boost, showing pretty huge pressure drop. This means the turbo has to work pretty hard. horsepowerinabox have published test results wich show up to 7psi pressure drop on the stock cooler. If you have 12 psi at the plenum, your turbo will be pushing 19psi at the outlet. The stock turbos dont like boosting too hard, and doing so can cause the exhaust wheel to seperate from the shaft. A good cooler will mean you protecting the turbo too.

Protect things before you start pushing. A tune for $200 probably wont be too good. For a good tune expect to pay around $500 up.

There are people on here that get good power with the stock ecu, up to 200rwkw, so dont immediately believe you will get better results from a power fc than a good cooler.

Good luck

Whats a good intercooler for that type of money?

I notice on ebay there are some for $850 with piping 600x300x76. Probably dodgy tho?

http://cgi.ebay.com.au/ws/eBayISAPI.dll?Vi...2479801725&rd=1

I messaged the guy and he said they were for gtst's

then again i could get a genuine hybrid with piping for about $1200

200-250rwkw is probably my aim down the track, what sorta mods would i be looking at for that?

Whats a good intercooler for that type of money?

I notice on ebay there are some for $850 with piping 600x300x76. Probably dodgy tho?

http://cgi.ebay.com.au/ws/eBayISAPI.dll?Vi...2479801725&rd=1

I messaged the guy and he said they were for gtst's

then again i could get a genuine hybrid with piping for about $1200

200-250rwkw is probably my aim down the track, what sorta mods would i be looking at for that?

$850 Thats a very cheep intercooler kit. Id like to know more about them. If you got that intercooler you would be able to afford a SAFC as well. Not as good as power FC but it would still help your fuel ecconomy.

munna, i emailed one of the people who had previously brought this kit and they said that they got all the parts needed and it looked good. He hadn't had any tests done on it tho.

I emailed the guy who is selling them and he said they are very similar to a hybrid and are capable up to 500HP

i have a hybrid fmic kit on my 33gts. payed $1200 which i thought was a bargin for a full polished bar and plate anitercooler and polished piping. They say they are good for up to 800hp with only a .2 psi boost drop through the cooler. As steve said i would recomend getting a cooler kit before a pfc

im dont have alot of knowlege on th SAFCII but id say it would be able able to get close to that figure on standard turbo. prob more around 180 - 190.

im runnig a wolf 3d but it is yet to be dyno tuned but am hoping for around 200 or close to it. I use to have an rb20 in a VL commodore with wolf 3d so i took the map from that and downloaded it to my new wolf and just changed a few things, knocked back timing and bit more fuel seams to go better then my old VL. Just trying to save for a final dyno tune

Front mounts are easy as to install... The hardest part would be trimming the front bar to fit the cooler.

I have added an FMIC and a PFC to my car. I think that the PFC is the better mod. Gave me a much better power curve

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...