Jump to content
SAU Community

Recommended Posts

The guy at my gym said chinups are much easier and work more of your biceps. He suggested I start with chinups, then go negative rep pullups and work up to a straight leg unassisted pullup which he said is more lat work.

Fair enough, I like chin ups so will keep doing those.

My numbers can be disregarded as they're not in line whit this thread sorry.

For everyone else playing at home.

http://www.aworkoutroutine.com/pull-ups-vs-chin-ups/

The guy at my gym said chinups are much easier and work more of your biceps. He suggested I start with chinups, then go negative rep pullups and work up to a straight leg unassisted pullup which he said is more lat work.

They are easier.

His advice is wrong.

Partials of the pullup (at the top of the range) combined with negatives are where you should try and start. Most people can't do a single pullup. I gave my son this version of beginers the other day. He couldn't do a single. He can do 5 full now within a short period of time.

Fair enough, I like chin ups so will keep doing those.

My numbers can be disregarded as they're not in line whit this thread sorry.

For everyone else playing at home.

http://www.aworkoutroutine.com/pull-ups-vs-chin-ups/

Dribble....... Lots of rubbish in there it's hard to know where to start.

So how many chin ups can you do Rev? I'm guessing 30+ if you can do mid 20s pull ups and chins are easier?

No idea. I don't do them. I can tell you that there is far less correlation than that article will lead you to believe. It is very common for people to be able to do 10 chins and 0 pullups.

but I take this slowly as it comes at the end of my routine and my forearms/elbows are usually fatigued by then and I've strained them once or twice.

Any that's my two cents.

The locked postion of chinups can give you some injuries in the forearms elbows. Moreso than pullups.

Is there a consensus about one being easier or something? I've always preferred having a supinated grip as it's easier on my wrists.

It's setup that will determine the angle of stress in the arms and shoulders. When doing a pullup, you want to look upward on the way up till just before the top. This will help tilt the body into a better postion. The chinup is more challenging on the elbows as this technique has little effect. Higher engagement of the bicep means the elbows are set to take up the fulcrum loads, you really only have the width to play with.

To be fair here, any of Leesh's attempts at pullups or chinups have been done straight after her volume training on lat pulldown...which she does at close to bodyweight...so I think fresh off the bat she'd be able to knock out a few reps of pullups.

  • 2 weeks later...

I started doing negatives of chinups today and then did my assisted pullups - I can get half of a regular chinup out now! Cut the assistance weight in half, though chins/pullups are a movement i'd also not done much of until lately, in favour of lat pulldowns.

  • 2 weeks later...

Haven't updated for a while, but I'm now

13

13

12

11

10

10

15

13

12

11

(5 minute rest)

13

I find this exercise interesting, because it's the only exercise I do where I shoot for maximum resistance straight up, without a warm up. I guess this is because of the static resistance level, but I sometimes contemplate whether I should do a few reps as a warm up and then go hard, or keep doing what I'm doing.

Either way it's been working, as I've been able to up the reps in the first set by 1 each week. This should theoretically bring the reps of the second set up with it, and so on, as my muscles adapt to higher numbers and follow up sets stay relative. Same way 1RM training increases volume, I guess. So the important thing here, is being able to get that "1 set max" up. 20+ would be a nice place to be, for the short term. Maybe then I'll look at weighted pullups.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Will have a look at that. I cant see any leaks 
    • Put another overflow bottle (ie, a 1.25 coke bottle or similar) under the overflow hose and see if it is being pushed out there or if it is disappearing into the engine.
    • Staring on a stand is no issue. You just have to wire everything up, give it fuel and cross your fingers that the stand is robust enough. Arranging the inlet plumbing is often the hardest part, without any surrounding structure to hand some of it from. No need for coolant if you only want to run it for <1 minute. As to the gearbox - I think the little Aisin box is a bit stronger than the other small Nissan boxes that went behind SRs, but I wouldn't be too keen to test its limits with the torque of a boosted 25. I don't know if you can retain the box and the tailshaft. The box won't connect to the RB without an adapter of some sort, which is either a plate that will push the engine forward (which is not good for fitting it into the bay's available space) or push the box back, which messes with the box position and tailshaft length - OR - cut and shut work on the bellhousing, which is a long way from "least modification". I'd be buying a new 370Z 6 speed or similar, doing what has to be done to that to make it fit RB (ie, cut and shut bellhousing) and the requisite tailshaft custom/mods.
    • Hi Everyone I am from West Pennant Hills in NSW. Been too busy until recently to attend to my RB25DET Series 2 engine until recently. I am planning to stick it into the S15 shell at this stage, unless a nice SR20DET turns up... For now, i am going to try and get the RB25 running and working well then decide what gearbox to use. My preference is to retain the SR20DET  6 speed gearbox and tail shaft to retain as much and least modifications as i can avoid. I am an old guy and won't be doing any heavy drifting so i don't need a bullet proof gearbox Does anyone have experience with starting the RB on a stand? I got everything setup as much as I can with the info i can find... endless searching and videos on Youtube I would be great to get some pointers Cheers Songo
    • Hey all, Recently have had my s1 r33 gtr serviced and noticed my coolant reservoir was topped up to the max line. Took the car out for 1 yesterday and noticed today the reservoir is completely empty.  Any ideas? Radiator is full
×
×
  • Create New...