Jump to content
SAU Community

Recommended Posts

not sure 4bidn1.

the car is purely road tuned so unsure as its been retuned since my last dyno run.

Im hoping to get around mid to low 300 hp on the dyno i go to ( it reads HP) as my previous 1/4 mile run was 13.45@275hp

one for the RB heads. this 33 gtr he claimed had 450hp i saw a massive highmount single. i was just in front for about half track before he left me for dead.

he ran a 12.2

I'll tell you which car I would pick for the roads I drive on (Hint, it doesn't have the highmount single....)

Nice runs mate.

  • 7 months later...

Nice one Chris, good launch. 1.8 60 foot is pretty good considering these cars weight.

I've lined up against a STI too, took off like a jackrabbit, but by 1/2 track I over ran him. They seem to run out of puff.

Goal is not far away. If you had Craig's 3.5:1 diffs.....

  • Like 2

Nice one Chris, good launch. 1.8 60 foot is pretty good considering these cars weight.

I've lined up against a STI too, took off like a jackrabbit, but by 1/2 track I over ran him. They seem to run out of puff.

Goal is not far away. If you had Craig's 3.5:1 diffs.....

yea i think that would help alot Alex it would just help that littlebit more out of the hole. We still have a few things to work on and im sure i can get 12's.

yea i saw him just creep in front on launch and my tyres where squealing then after that i had him. He wasnt too happy being beaten by a wagon..

Very nice!! Gotta love silly commo drivers :P

Wat sort of work have you done on the car?

haha thanks mate earlier in the night i went up against a VN commodore that was fun...

its got the ss2highflow with all the supporting mods, and tuned on HKS F-con.

if i was really serious id take out all the upgraded suspension and whiteline swaybars and bracing but that will be next when i get the parachute and NOS installed hahaha :whistling:

Edited by Footo
  • Like 2
  • 3 months later...

Been chatting to dale and thought I'd share my times from last night for my m35. ran consistent 13.6 - 13.7 through the night with this being the fastest time.

Stock intake, stock turbo, stock motor just a couple light mods and looking forward to putting on my Highflow made by Per4manz turbos in Perth


videos from last night



post-103368-0-60730800-1410438318_thumb.jpg

Edited by red_spider
  • Like 1

Nice work Jono; I'd guess this is the fastest time for an NM35 running stock turbo, and stock intake for sure.

pretty happy considering the amount of tools,clutter and crap in the back,had the spare in and even the fabric cover...plus the driver is heavy set...

no weight saving features here :P

  • Like 2

pretty happy considering the amount of tools,clutter and crap in the back,had the spare in and even the fabric cover...plus the driver is heavy set...

no weight saving features here :P

Beard adds 37awkw's.

True story. ;)

  • Like 1

Been chatting to dale and thought I'd share my times from last night for my m35. ran consistent 13.6 - 13.7 through the night with this being the fastest time.

Stock intake, stock turbo, stock motor just a couple light mods and looking forward to putting on my Highflow made by Per4manz turbos in Perth

videos from last night

same stats as mine but i ran a 14.1, hmm unusual ????

same stats as mine but i ran a 14.1, hmm unusual ????

What psi have you been launching at rudi? Also how hard was he launching? There is always variations between cars of the same type, but it is a fair bit different

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Kinda glad I never got to this ..    https://www.facebook.com/groups/1483859159195077
    • @GTSBoy This method was able to get readings of -10 to -2, so it looks like its monitoring.  Now I need to figure out why the vacuum on the line provided isn't alternating with manifold pressure.  I went with 2 lines that an RB25 tuner recommended but I'll get a longer hose and try directly off the back of the manifold.  He may have been used to OEM intake setups while I have a DBW setup that removed the MAF and IACV.  
    • I work at a car detailing and tinting shop called Quark which gets all manner of German cars in usually (mainly due to a contract with Mercedes Benz Kita Osaka, BMW Nishinomiya and others) but every once in a while something special comes in, like a fully restored 1972 HS30 Nissan Fairlady 240ZG... The shop owner had immediately started applying film to the windows as soon as it was in the shop so the interior was completely covered in towels and plastic sheets. But I could get a few photos of the engine bay which was restored like new. Such an amazing car to see in pristine condition in Japan these days.  
    • Was going to say the car pulls up nicely everywhere, especially going into that last long right hander before the main straight. Looks like a lot of fun.
    • Hey Dave, welcome aboard! Good to see another soon-to-be Stagea owner here. The wagons are awesome — plenty of space, still got that Skyline DNA, and loads of potential if you’re into mods. Definitely post up pics when you get it, everyone here loves seeing new builds. What model/year are you looking at?
×
×
  • Create New...