Jump to content
SAU Community

Recommended Posts

not sure 4bidn1.

the car is purely road tuned so unsure as its been retuned since my last dyno run.

Im hoping to get around mid to low 300 hp on the dyno i go to ( it reads HP) as my previous 1/4 mile run was 13.45@275hp

one for the RB heads. this 33 gtr he claimed had 450hp i saw a massive highmount single. i was just in front for about half track before he left me for dead.

he ran a 12.2

I'll tell you which car I would pick for the roads I drive on (Hint, it doesn't have the highmount single....)

Nice runs mate.

  • 7 months later...

Nice one Chris, good launch. 1.8 60 foot is pretty good considering these cars weight.

I've lined up against a STI too, took off like a jackrabbit, but by 1/2 track I over ran him. They seem to run out of puff.

Goal is not far away. If you had Craig's 3.5:1 diffs.....

  • Like 2

Nice one Chris, good launch. 1.8 60 foot is pretty good considering these cars weight.

I've lined up against a STI too, took off like a jackrabbit, but by 1/2 track I over ran him. They seem to run out of puff.

Goal is not far away. If you had Craig's 3.5:1 diffs.....

yea i think that would help alot Alex it would just help that littlebit more out of the hole. We still have a few things to work on and im sure i can get 12's.

yea i saw him just creep in front on launch and my tyres where squealing then after that i had him. He wasnt too happy being beaten by a wagon..

Very nice!! Gotta love silly commo drivers :P

Wat sort of work have you done on the car?

haha thanks mate earlier in the night i went up against a VN commodore that was fun...

its got the ss2highflow with all the supporting mods, and tuned on HKS F-con.

if i was really serious id take out all the upgraded suspension and whiteline swaybars and bracing but that will be next when i get the parachute and NOS installed hahaha :whistling:

Edited by Footo
  • Like 2
  • 3 months later...

Been chatting to dale and thought I'd share my times from last night for my m35. ran consistent 13.6 - 13.7 through the night with this being the fastest time.

Stock intake, stock turbo, stock motor just a couple light mods and looking forward to putting on my Highflow made by Per4manz turbos in Perth


videos from last night



post-103368-0-60730800-1410438318_thumb.jpg

Edited by red_spider
  • Like 1

Nice work Jono; I'd guess this is the fastest time for an NM35 running stock turbo, and stock intake for sure.

pretty happy considering the amount of tools,clutter and crap in the back,had the spare in and even the fabric cover...plus the driver is heavy set...

no weight saving features here :P

  • Like 2

pretty happy considering the amount of tools,clutter and crap in the back,had the spare in and even the fabric cover...plus the driver is heavy set...

no weight saving features here :P

Beard adds 37awkw's.

True story. ;)

  • Like 1

Been chatting to dale and thought I'd share my times from last night for my m35. ran consistent 13.6 - 13.7 through the night with this being the fastest time.

Stock intake, stock turbo, stock motor just a couple light mods and looking forward to putting on my Highflow made by Per4manz turbos in Perth

videos from last night

same stats as mine but i ran a 14.1, hmm unusual ????

same stats as mine but i ran a 14.1, hmm unusual ????

What psi have you been launching at rudi? Also how hard was he launching? There is always variations between cars of the same type, but it is a fair bit different

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Oh, also, forgot to add these photos I believe.
    • Thought i'd update on this. I was able to get in contact with Craig Lieberman and later on Darryl Alison (owner of Kaizo Industries). Darryl was able to help me verify that my car was in fact one of theirs and is helping me find more info on mine !
    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
×
×
  • Create New...