Jump to content
SAU Community

Recommended Posts

not sure 4bidn1.

the car is purely road tuned so unsure as its been retuned since my last dyno run.

Im hoping to get around mid to low 300 hp on the dyno i go to ( it reads HP) as my previous 1/4 mile run was 13.45@275hp

one for the RB heads. this 33 gtr he claimed had 450hp i saw a massive highmount single. i was just in front for about half track before he left me for dead.

he ran a 12.2

I'll tell you which car I would pick for the roads I drive on (Hint, it doesn't have the highmount single....)

Nice runs mate.

  • 7 months later...

Nice one Chris, good launch. 1.8 60 foot is pretty good considering these cars weight.

I've lined up against a STI too, took off like a jackrabbit, but by 1/2 track I over ran him. They seem to run out of puff.

Goal is not far away. If you had Craig's 3.5:1 diffs.....

  • Like 2

Nice one Chris, good launch. 1.8 60 foot is pretty good considering these cars weight.

I've lined up against a STI too, took off like a jackrabbit, but by 1/2 track I over ran him. They seem to run out of puff.

Goal is not far away. If you had Craig's 3.5:1 diffs.....

yea i think that would help alot Alex it would just help that littlebit more out of the hole. We still have a few things to work on and im sure i can get 12's.

yea i saw him just creep in front on launch and my tyres where squealing then after that i had him. He wasnt too happy being beaten by a wagon..

Very nice!! Gotta love silly commo drivers :P

Wat sort of work have you done on the car?

haha thanks mate earlier in the night i went up against a VN commodore that was fun...

its got the ss2highflow with all the supporting mods, and tuned on HKS F-con.

if i was really serious id take out all the upgraded suspension and whiteline swaybars and bracing but that will be next when i get the parachute and NOS installed hahaha :whistling:

Edited by Footo
  • Like 2
  • 3 months later...

Been chatting to dale and thought I'd share my times from last night for my m35. ran consistent 13.6 - 13.7 through the night with this being the fastest time.

Stock intake, stock turbo, stock motor just a couple light mods and looking forward to putting on my Highflow made by Per4manz turbos in Perth


videos from last night



post-103368-0-60730800-1410438318_thumb.jpg

Edited by red_spider
  • Like 1

Nice work Jono; I'd guess this is the fastest time for an NM35 running stock turbo, and stock intake for sure.

pretty happy considering the amount of tools,clutter and crap in the back,had the spare in and even the fabric cover...plus the driver is heavy set...

no weight saving features here :P

  • Like 2

pretty happy considering the amount of tools,clutter and crap in the back,had the spare in and even the fabric cover...plus the driver is heavy set...

no weight saving features here :P

Beard adds 37awkw's.

True story. ;)

  • Like 1

Been chatting to dale and thought I'd share my times from last night for my m35. ran consistent 13.6 - 13.7 through the night with this being the fastest time.

Stock intake, stock turbo, stock motor just a couple light mods and looking forward to putting on my Highflow made by Per4manz turbos in Perth

videos from last night

same stats as mine but i ran a 14.1, hmm unusual ????

same stats as mine but i ran a 14.1, hmm unusual ????

What psi have you been launching at rudi? Also how hard was he launching? There is always variations between cars of the same type, but it is a fair bit different

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • After @Kinkstaah debacle, I'd never want to try and get it right 😛
    • The hood lines up with the fenders. The front bar doesn't perfectly line up with the fenders where the wheel arch is. You have to 'squeeze' the front bar 'in' as it wants to naturally flare out and be longer on the sides. There's a few threads where people notice this when they only swap a GTR style bumper and front bar. Unless you have genuine OEM items - you may be better served getting conversion kits. There are GTT bumpers to fit GTR hoods. There are GTR hoods (non genuine) to fit the GTT bracketry. MAY  
    • The real question is, on some of those wild roads they call highways, how many times did a farmer in an old ute from the early 2000s blaze past you over double lines?   Tassie is a wild and really cool place, and after doing a work related road trip there January of 24, I understand why Targa Tasmania is ran there, and is so tough to do well at! We had a brand new Camry Hybrid that handled quite nicely, and thankfully weren't in an old car, because cresting some of those hills in a 100kmh zone for it to suddenly be like "surprise f**kers, this is a recommended 30kmh hard right turn" wouldn't be pretty. We weren't racing the Camry around, but we weren't slouching in the bends either. But my lord those old farmers know their old clapped out utes, and those roads, as they were absolutely hammering it!   You're also super lucky to make it up to Mt Wellingtong this time of year. It's often road closed with snow/ice! Also, I hope you hit up Salamander Road in Hobart for some insanely good food (I highly recommend the dimly lit Irish pub for a Guiness Pie, or even the bangers and mash!!!)   How long did the Ferry take to get across? I want to do a road trip of Tas on my own time, but I get horrifically sea sick, and I don't want me on the Ferry, just the car 😛
    • So far so good, about 30km on it so far and nothing out of sorts yet thankfully
    • Look at @Kinkstaah's thread on the issue.
×
×
  • Create New...