Jump to content
SAU Community

Recommended Posts

Nismo Plenum Group Buy #2

Following Sinista32’s successful Nismo plenum GB last year, I’ve decided I would start another for those that missed out.

Time frame: Group buy run’s from now until the 14th April. This end date is subject to change

Price: TBC closer to the closing date due to fluctuations in the exchange rate – estimated to be ~$1650 delivered. A quick Google will tell you this is a very good price.

Supplier: TBC shortly

No of people: 5 is the magic number

Details of the Plenum:

~ Nismo plenum as discussed on SAU. If you have a comment or technical question, put it in that thread please.

- Group buy #1 – info from the first GB plus results

- Nismo information – from this link. (It's the sales speak)

FEATURES:
To find the most suitable shape for tuning engines (400ps to 600ps), the diameter and the length of the intake pipe, and the cross section shape of the intake collector was redesigned. The distribution of air to each tube was improved to provide more equal airflow volume, improving torque in the mid-speed range. Improved air intake volume between the pipes of the front and rear sides reduces the difference in air intake temperature on both sides of the turbine, optimizing the air-fuel ratio and ignition timing and providing increased output and fuel consumption. Simple bolt-on installation means that no additional work is required (however, the throttle linkage and throttle sensor must be adjusted).

SPECIFICATIONS:
- Collector volume: 4.1 liter (genuine = 3.4 liter)
- Intake pipe length: 73.8mm (genuine = 48.5mm)
- Intake pipe diameter: tapered from ø 43 to ø 45 (genuine = ø 45)
- Material, production method: cast aluminum

PRODUCT NOTES:
- Intake temperature difference at the entrance of turbo chargers is improved averaging 18% in 2,400 to 7,600 rpm range.
- At 4,800 to 7,600 rpm, power output is increased by an average of 1.8%, while fuel economy is improved averaging 0.4%.
- This product cannot be installed with the engine mounted.
- Installation of this product will change the characteristics of the engine, necessitating adjustment of the engine control unit. Failure to do so very likely will result in damage to the engine.
- The engine improvement figures shown above are based on internal company testing. The actual level of improvement will depend on the engine specifications, conditions of air-fuel mixture and ignition timing, weather and the precision of measurement.
- This product cannot be used with single, large-diameter throttle chambers.

So who's keen?


Cheers,

Joel

Image1.jpg

Edited by wedge_r34gtr
Link to comment
https://www.sau.com.au/forums/topic/421901-nismo-rb26-plenum-group-buy-2/
Share on other sites

I might be keen, need to find out if this plenum fits in a vl

I assume it should...the stock rb26 fit's ok i beleive.

Never heard of someone putting a nismo plenum in a VL...nice and unqiue :-)

Hey man, will let you know tomorrow if i can jump in on this group buy..

This is an awesome price guys, wont find it any cheaper anywhere else an if you's are serious about your motor you'd have one of these hanging of the side of it!

Congrats guys. I don't think you'll regret it one bit.

...and it's cheaper than our GB.

yep, can't wait to get it. Final price ended up less then $1550 delivered.

So how many people did we end up getting for the GB?

3 of us

Ibz, yourself and me :-)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I am yet to see anyone ever regret a quaife or helical. ...other than drifting/skidpan duties. I kind of want to upgrade my factory helical with a Quaife (but really it's not ultimately that different, and is a MASSIVE UNDERTAKING), that's how good the hype is about them, that I want to try them 'just to see'  
    • D2 and Ksport are essentially the same thing and basically just generic Taiwanese manufacture. Better than ChinaBay crap, but... not top shelf. Öhlins have got to be some of the best dampers around, so likely to be a good option. It's going to get to the point though where I suggest you buy from Oz. We have at least 2x excellent options here. If I were you though, I'd be talking to KW about doing something for the R33. There's bugger all difference between that and the 32. In GTR land, anyway.
    • KW only offers a set for the R32 GTR. Popular options are D2 racing, Ksport or Öhlins. I have a D2 Racing coilover set, though I don't know for sure which one.
    • Well, the good news is you have more than one very good option for new coilovers in and around your country. Worth the drive over to KW to talk about GTR stuff.
    • Fair enough, I am in no way a tire expert so I'm not familiar with all the terms and conditions. I'll definitely note down the AD09 to potentially try in the future. Rain is not too big of a concern for now as I will probably only drive in the rain when I have to. And considering I still lack experience driving the GTR I'd more than likely take it easy too. I have coilovers in the car but as I barely got to drive so far I never bothered to even check if they are adjustable haha. The suspension is almost entirely old and worn as well so I suppose when I eventually fix that in the future that would make a huge difference.
×
×
  • Create New...