Jump to content
SAU Community

Recommended Posts

has anyone had problems with these guys? ive had nothing but dramas for the past 5 weeks chasing a air flow meter. I paid for it and they sent one. it had water in it and was full of rust and not working. after telling them and sending pics they said they will replace it and I never got anything. I was waiting another 2 weeks for it to arive than I called them yesterday and they told me they didnt even send anything when they told me its on its way and asked for my bank details to refund me the money.

has any one had problems with them? ive bourght alot of parts off them and never had problems before.

ive gone to just jap today to buy another and the condition of the one from just jap is in 100% good condition. I think ill be staying at just jap now

Link to comment
https://www.sau.com.au/forums/topic/422174-skyline-spairs/
Share on other sites

From personal experience, I know them to not have a decent customer service experience, as with 80% of wreckers out there.

Also are you reffering to JustJap or JJ AutoParts (formerly known as Just Japanese Auto Parts)? JJ AutoParts have a proper office and I think they are by far the most professional wreckers out there (though their site could be a bit better for viewing and browsing experience).

Link to comment
https://www.sau.com.au/forums/topic/422174-skyline-spairs/#findComment-6792657
Share on other sites

The impression I got when I drove there a couple of times is that it's basically two guys who buy halfcuts and wrecks and fill containers with bits then sell them off. Quality of parts and service don't seem to take a high place on their priority list, but that being said, the prices are reasonable enough that you can't really complain.

The last thing I bought was a GTR wing, and I was told they would have it ready for me on arrival. When I arrived they had the whole boot ready for me and the sales guy helped me load it into the Forester. When I got it home, I wanted to remove the wing and put it on my boot instead of try to peel the GTR badge and VSpec stickers off the GTR boot (and it was not as nice as my boot condition-wise).

Only then I noticed the crack under the LED where it was broken when they tried to remove it. When I started to undo it all, the double-sided tape on one side was peeled, indicating that it was previously messed with, and the nuts with captive washers were mostly missing and some were replaced with smaller non-washer nuts, so you could see where the previous (wider) washer-nuts were previously.

So, a bit broken and obviously when it happened they gave up and decided not to tell me that it was no longer "perfect condition" and to give me the whole boot so that I thought that they hadn't touched it. I CBF following up on it because I wanted it and i'd removed my boot and wing already and it is over an hour drive to get to their unit. I'm sure if I hung out I could get a better one for the $500 I paid, but I was impatient.

So... mixed results, and at the end of the day they are a business and i'm sure they would refund or exchange on broken or 'not as described' things. Slow contact and response is par for the course for a small-time operator like this. I get almost immediate responses from Import Monster and JustJap, but they will cost almost twice as much for most things.

Link to comment
https://www.sau.com.au/forums/topic/422174-skyline-spairs/#findComment-6798656
Share on other sites

  • 4 weeks later...

Nah mate there a rip off with price! They sold me a dodgy engine that was supposed to be 300000 km it had a cracked piston and stuffed bore in cylinder one ! And they argued and threatened me and wouldnt give me a refund I was told it was compression tested i drained the oil and bits of pistons came out from the oil hole bastards I won't go there !

Edited by 500hp
Link to comment
https://www.sau.com.au/forums/topic/422174-skyline-spairs/#findComment-6829351
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...