Jump to content
SAU Community

Recommended Posts

As long as you have safety bars in place at the right height, you're not going to break your neck. The body tips over forward and you end up on your knees with the safety bars taking the load, before this happens.

If you feel like this, you need to tilt the head up higher, chest out further and shoulders back further.

yeah I used to get that a bit until I started really using my rear end to power up, and stopped wearing heeled shoes

I wear powerlifting shoes, so maybe I need to focus on using my rear to power up as you say if I start squatting again.

I wear powerlifting shoes, so maybe I need to focus on using my rear to power up as you say if I start squatting again.

If you are tipping forward when coming up, it means that your hip/rear is already rising faster than you can handle.

you either lack upper back strength or need to practice squatting more upright.

Front squats are good for this.

If you are tipping forward when coming up, it means that your hip/rear is already rising faster than you can handle.

you either lack upper back strength or need to practice squatting more upright.

Front squats are good for this.

I tried to do front squats as I cant back squat due to my injury but I couldn't even front squat the bar. Can't seem to get any upper body strength going on.

Sorry I didn't know you had an injury.

Why couldn't you squat just the bar? too heavy or injury related? mobility?

yeah too heavy, I just couldn't get the mechanics of balancing the bar in front of me.. yet I was back squatting 65kg

You should easily be able to front squat the bar. Keep your head and elbows high.

Just try bw with a broomstick til you get comfortable doing it

Edit: TTT suggested broomstick as well, great minds think a like

Crossed arms sucks, I prefer the other way

Edited by Mitcho_7

Yeah tipping forward. Birds would be able to explain it better than me

Only seen you attempt it once and I forget where the point of failure was.

I'm not very good at front squats myself...arms don't quite have the flexibility for it yet.

I actually find front squat positioning/mechanics much easier to get good depth but obviously cant do as much weight.

Keeping your elbows high and head up are really the only cues I use. As soon as the elbows drop its about 20x harder I find

Edited by Mitcho_7

my injury is between L5 and S1 so even though I wear a belt it, I can't get it low enough to support that area. It's right down at the top of my glutes.

what TTT said about falling forward is really good advice. It took me a long time to learn how to sit back into a squat and use my glutes instead of shifting my weight forward and using my quads.

I was a lot stronger squatting from my quads in the beginning. Any time I felt the weight get heavy I was shifting weight onto my toes. Wasn't helped by the oly shoes I was wearing. This was until I started having crippling knee pain. Its was so bad I was hobbling around and couldn't sit for long periods without them aching.

So I ditched the oly shoes and practiced sitting back, having the weight on my heels. I would actually lift my toes off the floor as I squatted to make sure I didn't come forward. Later I also switched to a low bar position which also helped and I do a lot of front squatting as assistance. Very difficult to not sit back when front squatting as TTT suggests.

This fixed my knee pain but makes it really hard to buy pants/shorts as my ass is heaps bigger! lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • This car has run before on this z32 ecu can get the part number for you, I have tried with no AFM it didn’t change anything, I compression tested today 140-150 across all 6 cylinders, also set fuel pressure to 43psi. The only weird thing was cylinder 1 plug was black and fouled other 5 cylinders were just wet with fuel. Spun cas by hand and confirmed injectors are clicking 
    • Since you came here to ask for help, have you thought about answering our questions, that might help us lead you to why it was skipping, or have you given up on getting advice?
    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
×
×
  • Create New...