Jump to content
SAU Community

Recommended Posts

  • Replies 82
  • Created
  • Last Reply

Top Posters In This Topic

I'd love to see a bike race between powerlifters... it would be a very fast, very short race... probably followed by a lot of heavy breathing, sweating and swearing lol

I don't think it'd be that fast. Most of them would be out of puff before they even got going very fast, lol.

According to Wikipedia, Robert Forstemann actually has 34" thighs.

According to my dressmaker tape, I have 22" thighs.

okay.jpg

I only have 20" thighs, but I'm 6'2 and weigh 72kg and don't do any sort of gym work (just a few hours on the bike most weeks)

I just grabbed the tape and at the biggest point even I have just under 26inches and I can't even squat my own body weight yet and I'm far from fat either so I wouldn't be too caught up on size gents, Birds is smaller but much stronger etc.

Where you guys measuring from? I'm just standing up and measuring towards the top half of my leg at the roundest part, flexed it's bigger again.

Sidebar, I have skinny legs so u guys must have really skinny legs or I'm measuring wrong somehow.

Measured around the thickest part and flexed. I'm naturally skinny with a narrow bone structure, having weighed 63kg @ 6'3 once upon a time. As Nick said, it's tough for tall guys to get big legs. And size does not always equal strength!

You may not be fat, but still possible to have a bit of fat on your legs.

I just measured about halfway up my thigh. If I measure right up towards my groin then I get 22".

I'm not to fussed on muscle size, otherwise I'd hit the weights. But being bigger wouldn't help me much. I'm more interested in being able to go up hills fast, which means less weight and more stamina. I'm currently working to get under 70kg.

I'm not sure what mine are flexed, currently stuck on couch with baby sleeping on my chest. Bigger but not sure how much.

Birds, at 6ft and 65kg I was a rake, you must have been close to death at 63 lol

Eat a burger man.

Boz, I'll trade you some Bench for leg strength.

Side bar: Squatted a little for the first time

Since last week when my back went south. Physio OK'd it and to my surprise it felt decent.

My pelvis is starting to feel different (maybe better in some way?)

I'd love to see a bike race between powerlifters... it would be a very fast, very short race... probably followed by a lot of heavy breathing, sweating and swearing lol

A powerlifting meet between cyclists would be just as funny, huge squats and 37.5kg bench pressing

I was asking Jason (Chiro) if he saw many cyclists... I see s many of them hunched over their bikes with the most godawful flexion in their spine... he said a lot of them have back issues

it isn't so much that cycling causes back issues, but just that plenty of people with back issues cycle (my back actually plays up if I don't ride for a while). some certainly don't help themselves though, by setting their bike up poorly, or not getting fit up properly when buying the bike.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Could be falling edge/rising edge is set wrong. Are you getting sync errors?
    • On BMWs what I do because I'm more confident that I can't instantly crush the pinch welds and do thousands of USD in chassis damage is use a set of rubber jacking pads designed to protect the chassis/plastic adapter and raise a corner of the car, place the aforementioned 2x12 inch wooden planks under a tire, drop the car, then this normally gives me enough clearance to get to the front central jack point. If you don't need it to be a ramp it only needs to be 1-1.5 feet long. On my R33 I do not trust the pinch welds to tolerate any of this so I drive up on the ramps. Before then when I had to get a new floor jack that no longer cleared the front lip I removed it to get enough clearance to put the jack under it. Once you're on the ramps once you simply never let the car down to the ground. It lives on the ramps or on jack stands.
    • Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Nice....looking forward to that update
    • Neg, the top one is actually for the front. The sizes are 18x10.5 +18 and 18x11 +32.   I measured many times but I'm sure I'll have problems as this is the thread for problems.
×
×
  • Create New...