Jump to content
SAU Community

Recommended Posts

You really love getting the press involved huh? LOL

Nope, no name. I've tried since day one to get the name of reporting officer so I could have a chat to him and see where the error has occured. Unfortunatly, EPA continue to withhold the name of the officer for some reason or another.

If I was able to get the officer's name, I would no doubt follow the path you mentioned as the two conflicting stories will raise alarm bells. Hopefully the officer isn't in on it also. EPA = Untrustworthy!

the are not allowed to with hold the name of the officer. The name should also be stated on the fines! if not id be def chasing it with the correct sources as i sated earlier in this thread

Why does this not surprise me...it seems bureaucratically easier to process you,even with bullshit amendments, than to do the paperwork involved to cancel it.

Feel for you man. But as Paul said, even more reason to fight it. Would be awesome if something like this got media coverage. I know more than enough stories or people with stories to create a segment out of it.

deffo mate. bring it to light. you have to knowledge and what not, what bout people who would just do it because they wouldnt know any better. get the story out there my friend!

That's true, but the way I see it, it's going to turn into a massive finger pointing exercise and with the EPA being a government branch, they're going to have a lot more money to throw into defending themselves than I do in accusing/prosecutting them :(

I wish the whole bullshit thing could be exposed...everything from the corrupt cops who feed off EPA's ridiculous laws to the EPA itself and the lack of a vessel through which to challenge infringement.

the are not allowed to with hold the name of the officer. The name should also be stated on the fines! if not id be def chasing it with the correct sources as i sated earlier in this thread

Believe me mate, I've tried numerous occasions to obtain the name so i can chase it up without EPA getting involved and possibly getting their stories changed.

Why does this not surprise me...it seems bureaucratically easier to process you,even with bullshit amendments, than to do the paperwork involved to cancel it.

Feel for you man. But as Paul said, even more reason to fight it. Would be awesome if something like this got media coverage. I know more than enough stories or people with stories to create a segment out of it.

Thanks mate, I feel for me too. Paul does have a point, but again, my resources in terms of fighting it are limited compared to EPA.

There's my point exactly! Why are we "guilty until proven innocent"? EPA clearly don't see the flaw in their "schemes", which is all good cos EPA will get their own soon enough*

*I may or may not be condoning the act of EPA Staff Carpark dobbing

Believe me mate, I've tried numerous occasions to obtain the name so i can chase it up without EPA getting involved and possibly getting their stories changed.

Stuff the EPA! call the SRO and have them place the fine/etc on hold and have them investigate the issue.

I bet the EPA staff will be exempt from the guilty until proven innocent approach.

Love how the spokesperson from EPA says she was misquoted...and her follow up or supposed original quote is completely different in every way. Guessing she had a quick lesson in Australian law that you are innocent until proven guilty beyond a reasonable doubt. Even if she was misquoted, that is how the system works down at the EPA the burden of proof is on you which contradicts everything our legal system is supposed to stand for. I have no idea how these laws were passed and powers were delegated in this way?

Turbodragon...if the EPa seem to think you can put in a stat dec in the case of a wrongful infringement, then perhaps write an email saying you would happily sign a stat dec contrary to the information contained in the infringement. This seems to be all that is required in defence of the EPA litter fines...if the spokesperson's often changing words are anything to go by. After that, they would need to take it to court to prosecute you further.

I bet the EPA staff will be exempt from the guilty until proven innocent approach.

Love how the spokesperson from EPA says she was misquoted...and her follow up or supposed original quote is completely different in every way. Guessing she had a quick lesson in Australian law that you are innocent until proven guilty beyond a reasonable doubt. Even if she was misquoted, that is how the system works down at the EPA the burden of proof is on you which contradicts everything our legal system is supposed to stand for. I have no idea how these laws were passed and powers were delegated in this way?

Turbodragon...if the EPa seem to think you can put in a stat dec in the case of a wrongful infringement, then perhaps write an email saying you would happily sign a stat dec contrary to the information contained in the infringement. This seems to be all that is required in defence of the EPA litter fines...if the spokesperson's often changing words are anything to go by. After that, they would need to take it to court to prosecute you further.

Typical EPA and their back-pedalling. To be honest, I think I will gain more satisfaction in keeping an eye out for d*ckhead drivers on the road and then reporting them to get an EPA test. If we do this enough, the "general" public will see the flawed logic of the system (the same way they've seen the littering system flaw) and do the uprising for us.

Edited by turbodragon

And if there was a great deal of paperwork involved in cancelling a test, the more EPA staff we dob in, the more work it generates for them. Eventually, they'll either have to suck it up and continue to process/cancel dodgy dobbings or make a change to the system.

Good idea...we should actually flood/clog the system with hundreds of reports...prove that the system can be abused. Report camera cars on the side of the road, government and police vehicles etc. Will create all sorts of headaches.

Stuff the EPA! call the SRO and have them place the fine/etc on hold and have them investigate the issue.

Who are they SRO?

In my line of work its the State Revenue Office and they don't deal with this issue

Good idea...we should actually flood/clog the system with hundreds of reports...prove that the system can be abused. Report camera cars on the side of the road, government and police vehicles etc. Will create all sorts of headaches.

Agreed. We should start reporting and abuse the system that's abused us (sounds kinda strange now that I read that last line out loud lol). I think a Meet n Greet should be organised at a central point, and then we start fanning out and get as many number plates/time/location as possible and meet back to process our good work haha

The central point being EPA HQ carpark? :P

LMAO!

In theory, it's a great idea. In practice however, we would be pretty much writing our own Test Notice (as well as the other 100+ we manage to get over the course of a few hours hahaha)

we can all take the tram, if you're that worried.

F*ck that, I don't have a concession card. I'm already pissed off about having to pay $41 for a noise test, let alone another $10 to catch a tram to EPA headquaters.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ha, well, it's been.... a bit of a journey. Things have taken much longer than I'd hoped. I'll probably put up a thread at some stage. Hopefully soon. The car's not done any kms since my update in June though, put it that way.
    • Here's the chart for fuel pressure vs. current draw, assuming your base fuel pressure is 3 bar and you run like 0.5bar boost on WOT, you should only momentarily hit 9amps here and there. (Ignore my prev post, I cannot read a chart these days it seems)
    • Those comp test results are not hideous. Whether they are accurate or not (ie, when that comp tester says 140 psi, is the real pressure120, 140 or 160?) is unknown to us. The state of the battery used to crank it over is unknown, etc etc. Many people around here would say that the absolute values and the spread are perfectly fine to just add boost and keep going. I personally would be happier with a narrower spread than that, but even the diff between 125 and 145 is not terrible. That one cylinder at 125 though, has probably copped some damage relative to the others. You should inspect the valves seeing as you've got it open. Do you know how to measure installed ring gaps? That, and an inspection of the rings themselves, is how you will determine whether they need to be replaced. If you're not good to do these things, take the block and the pistons and rings to a shop that is, and ask them for the go/no-go on them. Do the bores need a hone at all? If so, you might well be justified in getting some different pistons in order to get away from the ring supply problem. Whether you're happy to spend a lot more money right now, on more gear, rather than less money, but an amount that looks stupid given that you will only get a handful of rings in exchange for that money, is for you to decide.
    • also possibly backed up to my filler and shat down it! 🤣
    • Ok so i would love some advice here please, i purchased an R33 a few months back and its had a few mods done to the engine, its an RB25det running a Master ECU, 1200cc injectors, bigger turbo, oil cooler, oil filter relocation kit, Spool H-beam rods, acl/ross pistons. When i removed the motor from the vehicle (as its getting a respray) i thought i would compression test it and these are the following results. Cylinder 1-145psi, Cylinder 2-143psi, Cylinder 3-125psi, Cylinder 4-145psi, Cylinder 5-140psi, Cylinder 6-135psi this test was done with the motor on the ground and powering up the starter motor. I dropped the sump and found broken oil squirters on cylinder 3,5 and 6. I was told my rings are probably worn so i stripped the motor completely to get a new set of rings for it. The trouble is no one has these rings anywhere and they have to be custom made by Ross over in the states and will cost about $600+$200 delivery. My question is how can i tell if my rings are at fault and if they are still ok and is this price ok for a set of rings?
×
×
  • Create New...