Jump to content
SAU Community

Recommended Posts

Just a quick question about my car and eligibility in NSW CAMS Supersprints. Currently my R32 GTR is unregistered and is fitted with a halfcage. Having a look at the regs I'm not really sure what category I fit into (or if I fit at all for that matter)

Type 1
Unmodified Production Cars (excluding Four Wheel DriveTurbos, Clubmans, Kit Cars and Replicas), where the onlyfreedoms relate to safety, engine reconditioning, tyres and some cosmetic items.
Type 2
Modified Road-Registered Vehicles (excluding Clubmans, Kit Cars and Replicas), allowing originally available options and limited modifications to engines, suspension and tyres.
Type 3
Competition vehicles based on Group 3 - Improved Production Cars rules as defined in the CAMS Manual.
Minor additional freedoms are allowed to recognise that there will be some roadregistered vehicles competing, that cannot meet full 3J rules.
Type 4
Competition vehicles based on Group 3D Sports Sedan rules as defined in the CAMS Manual. In addition, any vehicle that conforms to Type 1, 2, 3 or SV requirements, apart from Clubmans, Kit Cars and Replicas,
shall be permitted to employ or use Race Tyres but if it does so it shall be classified as a Type 4 vehicle.
Type 5
Clubmans, Kit Cars and Replicas (whether Road Registered or not) using Race Tyres, Racing Cars,SportsRacing Carsand Sports Racersor as classified by the NSWSupersprint Panel.
Type 6
Highly modified mass produced vehicles commonly knownas “Time Attack” vehiclesthat are modified specifically forthe performance of fast lap times and not for racing.
Type SV
Road registered vehicles with no limit on modifications.

The car is not logbooked, and currently is on semi's. What class would I be able to run in?

Link to comment
https://www.sau.com.au/forums/topic/423344-super-sprints/
Share on other sites

First of the above post is incorrect, type one excludes AWD turbo cars, type 3 you will need to prove your running standered boost or have a CAMS turbo monitor with turbo restrictors as per improved production regulations. Tyres are not a big a deal in any class but can run slicks in type 4.

Main problem you have being unregintered is you will requier a CAMS log book to be able to enter the supersprint series.

If you get or have a CAMS log book then i would recomend to run in Type 6 under the Time Attack Class or if you want to use full slick run type 4. If you run in type 3 your boost and any mods are closly monitored and will most likely need turbo restrictors.

Link to comment
https://www.sau.com.au/forums/topic/423344-super-sprints/#findComment-6814338
Share on other sites

Thanks for that. So cars racing under 3J regs are closely scruitneered on race day then? I wasn't sure they would go to that much effort for a super sprint. Looks like I am going to log book my car anyway, still deciding whether its worth running 3J or not. Thanks for your help :)

Link to comment
https://www.sau.com.au/forums/topic/423344-super-sprints/#findComment-6814345
Share on other sites

First of the above post is incorrect, type one excludes AWD turbo cars, type 3 you will need to prove your running standered boost or have a CAMS turbo monitor with turbo restrictors as per improved production regulations. Tyres are not a big a deal in any class but can run slicks in type 4.

Main problem you have being unregintered is you will requier a CAMS log book to be able to enter the supersprint series.

If you get or have a CAMS log book then i would recomend to run in Type 6 under the Time Attack Class or if you want to use full slick run type 4. If you run in type 3 your boost and any mods are closly monitored and will most likely need turbo restrictors.

An r33 gts is not awd?

Tyres change class as well?

Link to comment
https://www.sau.com.au/forums/topic/423344-super-sprints/#findComment-6819104
Share on other sites

I am now logbooking my car as a 3D sports sedan. For super sprints and just regular track days, will I need to wear a flame retardant race suit and gear?

Or can I get away with long sleeves etc?

Link to comment
https://www.sau.com.au/forums/topic/423344-super-sprints/#findComment-6823812
Share on other sites

The CAMS NSW Supersprint Series has made a rule to wear a race suit, but will let single layer go kart suit and non-flammable mechanic overalls pass.

So your best to get a single layer go kart suit of eBay for under $100 or pick up some overalls like King-gee...

Link to comment
https://www.sau.com.au/forums/topic/423344-super-sprints/#findComment-6830714
Share on other sites

Thanks for that, I'll probably just get a proper nomex suit as I'll need for iRace anyway. What about helmets? All I have is a shitty $100 job from a motorbike shop.

Also, Brad mentioned earlier that Clubsprints were a bit more relaxed. Are clubsprints the ones on the website hosted by the WRX club etc?

Link to comment
https://www.sau.com.au/forums/topic/423344-super-sprints/#findComment-6830869
Share on other sites

Thanks for that, I'll probably just get a proper nomex suit as I'll need for iRace anyway. What about helmets? All I have is a shitty $100 job from a motorbike shop.

Also, Brad mentioned earlier that Clubsprints were a bit more relaxed. Are clubsprints the ones on the website hosted by the WRX club etc?

Yes clubsprints are a bit more relaxed if run my eg WRX car club or SAU track days ect...

Link to comment
https://www.sau.com.au/forums/topic/423344-super-sprints/#findComment-6830876
Share on other sites

  • 1 month later...
  • 2 months later...
  • 9 months later...

There's a few CAMS supersprints coming up and I need to logbook my car to enter. It appears my options are Type 3 (3J), Type 4 (3D) or Type 6 (Time attack).

What would be the easiest class to log book my car for? Obviously 3J is the most difficult, but I guess it would be the most competitive for my car.

How competitive is the Time Attack class? Do many of the big guns show up?

As for running in Type 3, will they actually check for boost monitoring etc? I expect to be way behind the pack as far as times go, so i don't think I'll be raising any eyebrows from fellow competitors.

Link to comment
https://www.sau.com.au/forums/topic/423344-super-sprints/#findComment-7301241
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...