Jump to content
SAU Community

Rb25 Intercooler Sizes.. Can A Fmic Be Too Big?

Jswljones

By Jswljones,
in Engines & Forced Induction

 Share

Recommended Posts

Jswljones Enthusiast

Jswljones

Posted
Posted (edited)

I've been searching around and I found alot of threads on here but I'm getting different answers so I figured that I'd just ask...

I have a A31 Cefiro that has a RB25 swap right now...

as far as power upgrades it's still pretty much stock except boost controller and Apexi PFC

but I'm building a RB30DETT on the side and I have the front bumper off and before the car goes in for paint I'm mocking up the new FMIC for it and cleaning it up

Since doing this and seeing it on the car I'm kinda falling in love with it and I'm just wondering would it be a good or bad thing to run my FMIC now??

The size is 30 X 11 X 5 in

I have a 45V4 turbo on my RB25 S1 with fresh studs and everything so far is in top shape.

Not looking to abuse the engine just trying to make it reliable and will get it tuned again in a few weeks so I figured might as well do this now if I'm going to do it at all...

You can check out my build in my sig.

here are some pictures of the intercooler be mocked up

902956_10151627794979236_980034219_o.jpg

904598_10151627795264236_1900239268_o.jp

I've heard of intercoolers being too small on a car but never really ran into a problem of them being too big...

So my question is, what can I expect performance wise if I run this on my car now?

Is it a bad thing to run this big of an intercooler on a stock engine? or not?

Any advice or anything else you guys can offer or threads I should read on this subject?

Thanks in advance for your help!

Edited by Jswljones
GTSBoy Grand Master

GTSBoy

Posted
Posted

First up, the intercooler pictured is not 30x11x5. It is at least 500mm wide, 200mm tall and 76mm thick.

As such, it is neither very large, nor is it too large.

It is probably almost impossible to fit an intercooler that is actually "too large" to a car anyway. Especially if you need to fit it in legally (ie not cut anything). I'm not saying that from a position of ignorance. As a heat exchanger/heatsink, bigger will always be better, and the extra lag/lack of response that some people complain about from having more capacity in the inlet tract is mostly in their heads anyway.

BUT......it is probably true that you can put a core in that is bigger than you actually need both for the amount of power the car will make and the usage model. For a street car you'd be hard pressed to be on full noise for more than 10 seconds at a time. As such you'd have a hard time heatsoaking a biggish intercooler unless you have a lot of power available. And these days the serious kids are going E85 for big power and intercoolers become less critical.

Jswljones Enthusiast

Jswljones

Posted
  • Author
Posted

I'm from the US, my measurements reflect what we use here, not sure what the metric measurments are...

with that being said I don't have to worry about it being legal or anything this is stricly a is it a good idea question, and if so what should I expect of of it.

thanks for your insight though, I have read about the lag issue but not with the RB engines so i'm wondering if this would be an issue with this size and set up?

Dan_J Veteran

Dan_J

Posted
Posted (edited)

the only bad things about any intercooler is pressure drop due to core design/ size and extra lag from large piping.

edit: although a well made large intercooler can be better then a shitty made smaller one so just test it out. you can measure pressure drop by hooking up the boost gauge from the piping near/ or on the turbo

Edited by Dan_J
benelli Rookie

benelli

Posted
Posted

So basically go ahead and try it?

It can't be worst than the stock one... LOL!

Do it! Got nothing to lose and just cool air to gain.

I fit a blitz intercooler on my R33 that was rated for +500bhp and i was just aiming for 350BHP and like GTS Boy said there was no "lag" and i figure most of this lag is also just people talking. I figure design and making sure there are no leaks and clean welds is more important than size.

GTScotT Grand Master

GTScotT

Posted
Posted

If your planning to have a bigger setup later down the track there is no risk. You will need a large intercooler for anything over 300whp regardless, and by throwing the term RB30DETT around I am assuming you are going to end up with about 500whp. In which case you should have a good sized cooler.


You will notice a minor drop in punch from the stock turbo when going to the large cooler but nothing you wont be happy to live with under the circumstances. Do it.

Ben C34 Grand Master

Ben C34

Posted
Posted

I run a 600 by 300 by 75 greddy intercooler and the change in repsonsiveness isn't even noticeable. Best idea too. Car runs better. Idles better. Just better in general

How does the intercooler affect the idle? ?

Jswljones Enthusiast

Jswljones

Posted
  • Author
Posted

Thanks for your input guys, I'm just gonna go ahead and put this in, gathering the rest of the parts as we speak.

I've been honlding off on doing any type of engine mods and it's kinda nice to be doing something with it even if it's not that much.

Dose Pipe Sutututu Grand Master

Dose Pipe Sutututu

Posted
Posted

I know that, but according to the post I quoted, somehow it does.

probably previously there were leaks in the SMIC, there's no way a FMIC can affect idle unless there are leaks

  • 4 weeks later...
  • 2 weeks later...
speeddemon778 Rookie

speeddemon778

Posted
Posted

Hey guys, ive been reading this thread and I recently got an r33 gtst and want to install a front mount intercooler and cold air intake (with stock turbo for now) and im just wondering if you have any tips or know if any issues I may come across? I want the car to be reliable so I don't want to do anything that may cause problems

Dose Pipe Sutututu Grand Master

Dose Pipe Sutututu

Posted
Posted

Hey guys, ive been reading this thread and I recently got an r33 gtst and want to install a front mount intercooler and cold air intake (with stock turbo for now) and im just wondering if you have any tips or know if any issues I may come across? I want the car to be reliable so I don't want to do anything that may cause problems

stock airbox

stock bov

Blitz Return Flow kit

speeddemon778 Rookie

speeddemon778

Posted
Posted

I have a k&n cold air intake at the moment would it be worth installing or just keep the stock? I also want to get a fmic? will hopefully be looking into getting a bigger turbo in the not so distang future.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Yeetus
      R33 GTST Sh*tbox to Polished T*rd

      By Yeetus · Posted

      Gday Thought it was about time I started a build thread! As expected this project has snowballed into a huge financial liability, but unless you’re strong willed and responsible, it’s not a surprise. Background -  My first turbo car was an R32 GTS-4, got my full license and then totalled my Au Falcon a week later, so while trying to sell my RMZ450 dirtbike to buy another car a bloke offered to swap the R32 which at the time I felt like I was ripped off but looking back and seeing prices of those now ($40kish) it was a good deal, I didn’t know enough about these cars to appreciate what I had so sold it before the RB20 blew up. Between here and there, out of 12 cars I’ve owned the note worthy ones are a V8 Lexus SC400 (soarer), a couple of XR6 Turbos and my beloved S15 which I had for about 3 years, picked it up for $12500, repairable write off but she was fine, gun metal grey/pewter and bone stock/unmolested until I got my hands on it. Ended up spending about the value of the car and 280kw, 2 demerit points by the time I got defected and sold it for $14500 (also $40kish in today’s market, rip) Fast forward to the present day, I’m in a much better position financially and daily an MQ Triton (great cars, pipe down Ranger Bois), I cruised marketplace and car sales for a few months looking for another R32, the best deal I could find was an absolute rust bucket half finished project for $12000, until this R33 popped up in Port Macquarie for $18k - unregistered and barely running but decent shape, kept an eye on it for a few weeks and the price steadily dropped, $16k then $15k then $14k, that was the point where I was like shit someone’s gonna snatch this up! It was owned by a young bloke who had big plans but him and his missus just had a baby so smartest move financially for them but big gain for me. So 2 days later I’m towing a car trailer to pick this thing up. Roughly 2 weeks and $3500 later I’m cruising around Newcastle in my beat up R33 all smiles and dose noises! It only needed some basic shit to get it going, coil packs and air flow meter, electrical stuff and all fluids changed, 158k kms and running pretty good, nice smooth engine after oil and coolant flush - when I say coolant I mean it had been filled up with tap water, every gallery and heater element was filled with rust, 8-9 flushes later and still had brown liquid coming out but she’ll be right. The car was painted R34 Bayside Blue at some point but whether it was a cheap job or just not looked after is anyone’s guess, clear coat flaking like sausage roll.  Was rethinking my choices and contemplating life, had it up for sale for $22k - still cheaper than any registered R33 but got little interest, next minute I had an opportunity at work - 6 months overseas for good money, so that was a no brainer, fast forward again and here we are with a 50% finished project. Current Mods - 200ish KW according to butt dyno Was tuned with Apexi PowerFC EBC (old school Greddy Profec)  Stock turbo (more shaft play than a Tinder date gone right) 3inch turbo back Varex muffler  Aftermarket injectors of mystery size, Power FC showed 36% duty cycle at full boost so not behd good size Someone had good intentions but stuck with the stock R33 MAF so we had misfires at 6000rpm due to the MAF hitting 5.2V So far I’ve redone the entire interior with carpet form Car Mats Direct, new Seats and steering wheel from Autotechnica, also sound system by Autobarn (mainly Kicker) Also MCA pro comfort coil overs - Hands down best purchase yet, worlds of improvement over the tired 30yrold shocks Goals - 450kw/600hp on flex tune New paint job - Midnight Purple 2 Engine is at the shop getting rebuilt with forged rods a pistons, new valves and springs, ATI Harmonic balancer, Aeroflow 7.5L sump, rear head drain and oil restrictors as per oil control thread* and cam covers modded for larger breathers, other stuff I can’t recall of the top of my head Parts purchased and to be installed once the engine is done -  Engine loom from Wiring Specialties including these options: Haltech Nexus S3 R35 Coil pack conversion  PRP Dual Trigger kit Fan controller  Other Parts -  262 Kelford Cams Turbo - Hypergear ATR43SS3-ProS with T51R mod (whistly boi) 6 boost manifold (high mount) 50mm Turbosmart Pro gate (plumbed back for legal reasons) HKS Super Turbo Exhaust with High Flow Cat Custom 3.5inch dump and front pipe 1500cc Bosch injectors  Fuel Pump walbro 525 Haltech MAP and IAT sensors Haltech Flex Sensor Fenix Radiator with dual thermo fans LS1 Alternator Kit Oil Filter Relocation from EFI solutions and Cooling pro oil cooler Many other things sitting in my garage waiting for that engine to come back. Progress pics to follow -  
    • GTSBoy
      Dose's Sometimes DIY and Pay Someone Home & Boat Improvement Thread

      By GTSBoy · Posted

      Losses have to be less with DC coupling. Provided the battery inverter has decent MPP tracking ability - which really shouldn't be a problem. It's not 2005 any more.
    • ossy
      Will R33 GTR rear backing plates fit GTST?

      By ossy · Posted

      Hi, Will the R33 GTR rear brake backing plates fit a GTST? I'm struggling to find GTST ones but can find new GTR ones.   Thanks.
    • Yeetus
      Has anyone put in brand new full carpet? (not floor mats)

      By Yeetus · Posted

      I also got the same floor mats for a bit of extra bazzaz haha
    • Yeetus
      Has anyone put in brand new full carpet? (not floor mats)

      By Yeetus · Posted

      Some more close up pics now that I’m back to working on the car, the loop pile is nice but again haven’t compared it to the other types in person, it’s hard to tell from the pics on the website. View of the hemming on the edges too, it comes in 2 pieces - front and back, honestly very happy with it for anyone on the fence.  Also attached my previous pics from further up as it didn’t let me post them directly before. (Nothing worse than photo bucket pics that aren’t hosted anymore years later)
×
×
  • Create New...