Jump to content
SAU Community

Recommended Posts

I know most people here use HKS GT25s but Im about to go down a different path and try the TRUST route :sly:

I was wondering if anyone here can tell me how different specs of TD06 would perform on a RB25DET, in particular the Compressor housing specs between the 17C, 20G, and 25G

The exhaust housing is pretty straight forward: bigger, more power, more lag

What about the the differences between TD06, TD06S, TD06SH and TD06SL2?

The TD06-17C are usually used on high powered SR20s but anyone every tried them on RB25s?

Link to comment
https://www.sau.com.au/forums/topic/42446-trust-td-06-different-specs/
Share on other sites

hey got a tdo6 20g with 8cm exhaust housing.. internal wastegate.. you can get 8cm, 10cm, i think 12cm not sure about 14.. but there is a guy with a 16cm i think.. its rob77 he mite post up details. im not sure about any power ratings.. dunt even know about mine.. so if some one could help out please.. im going to convert it to external wastegate i think.. just for the noise (as its a drift car and need all the wank value parts :)) this is going on a rb20 and hopefully isnt too laggy. there was a jms car running a internal wastegated tdo6 19c and he made 306rwkw on 1.6bar with special fuel and ran 235rwkw at a dyno day not sure on boost/fuel etc tho. did run a 11.3 i think on slicks also.. if that helps. oh and that was on rb25/microtech etc etc

How much power you after...a L2-20G is equivalent to a GT2835, a SH-25G maybe too powerful if you want to keep it a street car. I know an Evo with a TD06SH-25G will make 650ps @ 2bars.

Thus the question which is constantly asked, why go L2-20G when the factory Evo turbo can run high 11s and make just as much power (~400ps), same with why go T67 when a TD06 can make just as much. Depends on the car, setup and tuning.

Once my engine was rebuilt with forged pistons we ran up 366hp @ 1bar on a td06-20g 16cm^2 exhuast housing. I had the exhaust housing and dump pipe ceramic coated whilst the engine was in bits and I get full boost by 4300rpm. Do a search on "average power" as that thread has a copy of my dyno sheet. Its such a wild ride now, it goes from ~160hp to ~330hp in the space of 1000rpm. I'd like to try higher boost settings, but without bigger injectors, a decent exhaust manifold (its all bolted onto the stock one) and some cams I dont think its worth it. Only fault I find is the lag, a ball bearing turbo would probably come on boost about 500-800rpm quicker for the same size.

Only fault I find is the lag, a ball bearing turbo would probably come on boost about 500-800rpm quicker for the same size.

Is that a hunch or something that Steve SST etc has told you. My thinking is that it wouldnt be that dramatic, could be wrong, probably am, just interested to know. In the Garret catalogue, what does the 16cm housing equate to, something like a 1.12 or bigger isnt it?

Buster vs B-Man would be a more vaild comparison, both have ~325rwkw peak (Buster 328, B-Man 323). Buster's TD06-25G/10cm rear had more all over the curve, boost coming in 1,000rpm earlier + a higher peak. B-Man's 3040/1.22 A/R is capable of far more - his is only in initial stages of development whereas Buster's was at it's peak.

(I should just shaddup and let both of those guys post here, but I blabber too much)

have a td06-19c internal gate turbs, has been flowed with garret comp wheel (the std comp wheel was shagged) even so the std wheel is very ugly in its design, and tiny too. Havent actually ran this setup yet but getting close (rb20)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • If you have a RB25DET NEO AWD motor, you will need this: https://www.hioctanedirect.com/ASR-RB26-RWD-Street-Comp-6.5L-Sump-Suit-R32/33/34-and-VL It is made for the AWD motor, but makes it fit a RWD setup and gives you a new pickup. Just one thing, the pickup sits quite forward, compared to a conventional RB25DET RWD motor. This may or may not have contributed to my previous AWD -> RWD shitting the bed at the track.
    • My car is also flex tuned. It's worth mentioning it (the LS1 ECU) has a 1D table for E85 addition and just uses the ethanol stoich part as the second point of reference. It also as a 3D timing map for Ethanol adjustment. You would think this isn't enough but it works pretty damn well. That said, I wouldn't want it in turbo application. It's like lifting non-natty, or taking meth. It gets you unrealistic results that break down more things going forward. If people used it to make the same amount of power they do on 98 then it'd be one thing. But people use it, crank it up to eleventy million PSI, it doesn't knock - but it pushes the point of failure to another, more expensive thing to break. Every time I see someone make 280kw on 98 and 350kw on E85 on the same equipment I just cry a bit and really wish they would just stay on 98 in that exact scenario. It's bad for you. 
    • This is kind of what I was thinking but the temp sender wire and the two pressure switch wires run through the starter subharnes and I eliminated the two pressure switch wires completely.  @GTSBoy I have a can gauge with unusually bright warnings should the oil pressure fall so the factory light isn't needed. I need to dig out my wiring diagram and see if I can sort this out.
    • It's a valid point. And it is doable with the Nistune. But I'm not inclined to flex it the way Nistune does - certainly not on a Neo ECU. They're already pernickety enough to tune just one one fuel. And of course, I'm not that interested in putting in a Link or similar, on a daily. With the stock ECU, stock looking turbo, etc etc, I still stand a chance of surviving a run-in with the plod. Last time it went over the pits (which was for the transplant, for because of a run-in with the plod), the Nistuned ECU did not even raise an eyebrow. They want to see a stock ECU running the engine, and they are happy to see it do so without the check engine light** on. Never mind that the Nistune is necessary to make the stock ECU work in a different chassis without ABS, TCS, etc. **And they actually provoke the CEL to come on by disconnecting the AFM, to prove that the globe hasn't been pulled!
    • This is why you flex fuel it...
×
×
  • Create New...