Jump to content
SAU Community

Recommended Posts

Hi guys,

I bought myself a deep corn Nardi wheel a while ago and was talking to my mechanic as I never had a chance to install it (was waiting for a boss kit that never arrived). He told me that because my car is fitted with an airbag it would render the car defectable to replace the OEM wheel with the aftermarket one.

My question to anybody who may have gone through this is, is there a legal way that I can use my Nardi wheel??

Thanks in advance!

Link to comment
https://www.sau.com.au/forums/topic/424894-how-to-fit-a-nardi-wheel-legally/
Share on other sites

An idea I was running through my mind was to buy the boss kit with 2 quick switch adapter kits, I could switch to my Nardi wheel when going on cruise days ect and switch back to the OEM wheel when using my car for daily use. I understand the rules and such but would this idea be able to bend the rules a little?

An idea I was running through my mind was to buy the boss kit with 2 quick switch adapter kits, I could switch to my Nardi wheel when going on cruise days ect and switch back to the OEM wheel when using my car for daily use. I understand the rules and such but would this idea be able to bend the rules a little?

As above, doesn't matter if you can switch it back to the stock wheel or not, if you're driving with the nardi on it's illegal. And as far as I'm aware, no such quick release hub exists. Either stick with stock steering wheel with airbag and have it legal, or swap to a nardi with an after market boss kit and the first time you get pulled over, expect to be pulled up on it. No way around swapping out a stock wheel with airbag.

yep, all been said. it's illegal to run a non airbag wheel in your car. there are other possible legality issues with running the nardi wheel as well. not sure what the rules are in other states, but in QLD the minimum legal diameter of a steering wheel is 350mm. but there is a secondary rule that must be met. the diameter of a replacement steering wheel cannot be more than 25mm smaller than the standard wheel. so this means that if your car originally had a steering wheel that was 400mm in diameter, you can only legally put one in that is 375mm (25mm smaller). but if you car had a standard wheel that was 360mm, you could only go 10mm smaller down to 350mm.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • 9" wheels are a little too wide for a RWD 32. They can fit. People have put R33 GTR wheels on 32s for years and years. But they are a very tight squeeze. This has been known for about 30 years. As I said - there is no difference between a 17 and an 18 in terms of what will fit. The rolling diameter needs to stay about the same as stock - not very much larger. If you increase that, you will start to have problems. If you increae rolling diamater at the same time as yo increase width, you will have problems earlier. as 9" wheels are pushing the boundaries already, you would need to be careful with tyre choice. I would put 8.5s on the front of mine, but would expect problems with 9s.
    • post up screen shots of your injector tables
    • Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
    • I have an elite 2500 running an adapter harness on an rb25de neo r34. I took the butterfly out and removed all that junk. But I also went Plus+t at the same time. The butterfly thing works in reverse to the boost solenoid on the Gtt if that makes sense
    • yeh they are 235/45/17 up front and 255/40/17 in the rears. I still didn't get my answer if i can fit a 18x9 up front. I want to get 4 of this and see if they will fit before committing as they didn't see an 18x8 as an option but there is a 18x9.5 also.   Enkei RS05-RR 18x9 35mm ET 5x114.3 75.0 Bore Matte Gunmetal Wheel
×
×
  • Create New...