Jump to content
SAU Community

Recommended Posts

1997 Nissan 180SX type X

Blacktop SR20DET

84,000km original km's (on digital Odometer)

Highflow t28BB turbo just checked 1000km ago

Replaced all gaskets recently 1000km ago

Stainless Steel Manifold

Full Exhaust system turbo back with jap cannon out back.

Blitz Bov (hidden)

Hybrid Front Mounted intercooler,

Sard Pod Intake

Greddy Profec E01 Boost Controller (set to 12psi)

HKS Springs with nismo shocks sits nice and low 110mm off the deck.

Tune Agent Adjustable rear camber and toe arms

Tune Agent Adjustable castor rods

Strut tower brace for front (not on car at moment)

Full 50mm widebody kit moulded into car (paintwork is average but looks ok)

Type X wing is not on the car but comes with it.

Rota Grids 16x 8 +22 offset rims

30mm hubcentric spacers (car sits fat with the 50mm widebody)

Satnav / DVD in dash head unit with SD / USB input, blue tooth ETC.

Full Type X interior with the comfy seats etc

Digital Climate Control, Works perfect

Drivers side airbag


Selling cause i have too many cars at the moment and need some cash to fund another project.


NSW rego till end of August 13.


Keen to sell it quick so 9k or best offer , located mudgee NSW (3 hrs west of sydney)


NO TIME WASTERS OR TYRE KICKERS, you dont have the cash, DONT MESSAGE ME.

post-98329-0-02278000-1368510144_thumb.jpgpost-98329-0-55474800-1368510124_thumb.jpgpost-98329-0-79256900-1368510102_thumb.jpgpost-98329-0-85037400-1368510075_thumb.jpg

PM me if interested.
Link to comment
https://www.sau.com.au/forums/topic/425232-1997-widebody-type-x-180sx/
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...