Jump to content
SAU Community

Recommended Posts

Tried searching but must be hopeless at using it. Also the 25 thread is full of small turbo results.

Have a 25 with a 3582r plain wheel turbo.

I have a full 3 inch turbo back exhaust with a resonator and rear cannon on it but I'm struggling with small amount of exhaust backpressure pushing open gate under full noise.

I am thinking the dump pipe might be a tad small With the wastegate plumbed back in. I'm aiming for 500+ (currently at 471hp).

looking at what people's opinions/experirence are on What size exhaust they have.

I have enough room for 4 inch but don't want to go oversized if not necessary.

Go with posts.

Link to comment
https://www.sau.com.au/forums/topic/425650-what-size-dumppipe-for-500hp/
Share on other sites

A free flowing exhaust would just make it worse I think. You need to increase the wastegate actuator spring tension to help hold the manifold pressure in.

What is your base (minimum) actuator pressure?

4" = no restriction.

Saying that, plenty of people have made 500bhp on a proper 3" exhaust with open screamers.

Personally I'd go with a 3.5" dump to tip, magnafolw muffler and a free flowing rear can of choice... Here's the thing though, make the waste-gate dump pipe larger and longer than you might think. Run it right down and merge it just before the cat in a nice long, shallow angle transition.

i have 14psi actuator springs in. its a turbosmart 50mm gate.

I cant stand the sound of a screamer pipe so plumbback is a MUST..
the gate pipe is about 60cm long joining in just before the cat area so i think having a bigger diameter exhaust in a copy of current setup will do the trick.

I just dont want to go to hassle of doing 3.5inch only to need a 4 inch down the track

There is no oversize with a dump pipe imho. 4" will work fine.

However I don't think that's your issue, you should be able to get away with a 3". Have you tried a heavier WG spring as mentioned above?

There is no oversize with a dump pipe imho. 4" will work fine.

However I don't think that's your issue, you should be able to get away with a 3". Have you tried a heavier WG spring as mentioned above?

i have changed the way the gate signal is being sent and it helped sort of. its either 16psi base and wont bleed past 21psi as a single connection onto wastegate or as a 2 port connection its 23psi minimum bleeding up to the 26psi wanted.

I would like to run 18psi low and 26psi high settings so changing the spring pressure up closer to higher settings is something im trying to avoid

At what boost? 7psi is fark all spring...

I am running 26psi of spring, and after a few track days the tension has dropped back, now it only runs 19 psi off the spring. If you plumb pressure onto the top of the gate also you should be ok either way, mine easily runs a flat 32psi now with the 5 port Mac.

I have a 3 inch dump, and 2 inch off the 45mm gate. As long as they flow well and merge gradually into a 3.5 inch free flowing system you should crack 400kw with it fairly easily. Mine would be making that if I had a manual box...

At what boost? 7psi is fark all spring...

I am running 26psi of spring, and after a few track days the tension has dropped back, now it only runs 19 psi off the spring. If you plumb pressure onto the top of the gate also you should be ok either way, mine easily runs a flat 32psi now with the 5 port Mac.

22 psi, barely falls over any more than half a pound at 7700. Im running e-boost and pressure to both sides of gate respectively

Edited by abr33

Is that no fit in a r32 with a 25 in it stao? What fouled?.

I want to run plumbed in no matter what so can't include screamer. I prefer to hear the engine while its making noises not finding out after when its brokent

Edited by nick81xd

Is that no fit in a r32 with a 25 in it stao? What fouled?.

I want to run plumbed in no matter what so can't include screamer. I prefer to hear the engine while its making noises not finding out after when its brokent

It shouldn't make noises :/

Kurtis ran 500hp with the gate plumbed back and 3inch system....

Mine is a screamer so results are irrelevant I guess.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...