Jump to content
SAU Community

Recommended Posts

Sounds like late night shoot-em-ups will be common place soon, and my place is opposite the industrial estate frequented by drifters... Time for steel plate fencing?

sorry..... need to bin my straight pipes for a muffler :ph34r:

Oooooo create cardboard cars out of boxes and make engine/flutter noises pretending to drive them around...

Or get remote control drift cars and drive them around the area, doing burnouts etc. hehe...

lets do it. we can chip in to hire a bus too.

I've worked about 15 extra TAC funded shifts with TMU this year and not one single member has even had a second look at an import to simply pull over. They generally only pull someone over they have found doing something wrong to fine.

I can't believe how many stupid drivers there are out there, repeat drink drivers, suspended, disqualified I have almost impounded a car in each of those shifts for one of those or 45k+ over speed limit.

Eh don't be a dickhead on the road or to police and you'll be fine, not once in the 4 years of owning a import have i ever been pulled over for driving a import.

Yes i've been pulled while in my r33 but i was at fault [ Driving more than 100m in a bus lane ]

really?

1. i turn out of my house to get cat food for a starving cat, and i get pulled over for shits and giggles.

2. i got pulled over recently just for the cop to tell me how many demerit points i've got.

both times, i wasn't even speeding.

Eh don't be a dickhead on the road or to police and you'll be fine, not once in the 4 years of owning a import have i ever been pulled over for driving a import.

Yes i've been pulled while in my r33 but i was at fault [ Driving more than 100m in a bus lane ]

My bad, everyone's outlook on life should be limited to your experience.

Righto.

I spose all the times ive been pulled over, chased through traffic minding my own business drving like miss daisy was because they thought I was a drug dealer and not because of the car :rollseyes:

Lol or getting pulled over on Christmas Day for shits n giggles, then again a year later by 3 cop cars and 7 officers to tell me they thought my plates were home made? Both times doing nothing.

Guess I should stop being a dick to cops

Maybe we're driving too slow, being under the speed limit and all? I too was driving 5km/h slower than everyone else when Knox TMU went through 4 red light intersections to pull me over and state that they were pulling over anything with 4 round lights today (somehow I think the Euro Accords were safe). Yes, driving sensibly must be the issue at hand here.

I don't even get looked at in the merc, I even cut one of the hwy patrol off the other day without realizing and still nothing

lol he'd prolly apologise to you

Eh don't be a dickhead on the road or to police and you'll be fine, not once in the 4 years of owning a import have i ever been pulled over for driving a import.

Yes i've been pulled while in my r33 but i was at fault [ Driving more than 100m in a bus lane ]

Hahaha, I used to believe that for about 3 years. Up until this year... even a month ago.

Friday night, went out with a bunch of mates, on the way home on Springvale Road, crossing Princes Hwy, saw a bunch of cars on there at about 1am, so I thought I'll go have a look.

Turned left towards Sandown, doing the speed limit, just looking at other cars, before I got past the 7/11, a highway petrol was sitting on the side of the road. Drove past him doing speed limit, then he pulled out, and while I was doing a legal U-turn along with a few other cars, he cut off 2 cars in front of me just to pull me over...

Got told to pop my bonnet, I was polite and all, they checked everything, closed my bonnet and defected me for height..... 90mm?

So to those who thinks be nice and don't break the law and you'll be fine... That's a big fat lie!

It's sad that people don't believe it until it actually happens to them, but worse is people telling other import owners they must be acting up to receive a defect.

Have more faith in your online enthusiast friends than police with quotas to meet. Most of us have no reason to lie about police activity and would take it on the chin if we were doing something deserving of over-handed tactics.

My import cars are long gone.

Reason? Pulled up 16 times in r33 and s15. Not once was i doing anything wrong, not once did i lose a point.

One officer said to me "look at the car you drive" which tella you all you need to know.

Im a Mature age driver with clean driving record (12 points).

So that crap do the right thing and you will be okay is rubbish.

What will essentially happen here, is a stake out where no industrial drifters turn up, so you have a bunch of bored out of their brains police standing in designated areas for 3 hours, who need to show that the operation was a success. Along come the hapless enthusiasts meeting for a cruise...bam...they find their scapegoat and something to do for the next 2 hours because writing defects for ridiculously arbitrary items is better than standing around, waiting hours for people who do illegal shit to turn up...and never come...because VicPol intelligence is an oxymoron.

mother of god! it's..... perfect....

happy+crying.png

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Nice....looking forward to that update
    • Neg, the top one is actually for the front. The sizes are 18x10.5 +18 and 18x11 +32.   I measured many times but I'm sure I'll have problems as this is the thread for problems.
    • Just one thing; tapping tapered threads is tricky. Taps are always tapered and you would generally run it as far as you can, but with a tapered thread you have to stop much sooner otherwise the wide part of the taper will run in too far and you will have to thread the sensor in too far too as well (possible that it will never make a good seal) BTW nice wide wheels, I guess the top one is for the back!
    • Welp, good to know. Will have to wait awhile until steady hands with drills and taps are available. In other news, these just arrived! I will weigh them for posterity. Edit: 11kg each (or 10.9/11.1 depending on what my scale decides over multiple tests, the 18x11 don't seem to weigh noticeably any more than 10.5)  
×
×
  • Create New...