Jump to content
SAU Community

Recommended Posts

nitto stroker kit

nitto oil pump

nitto head gasket

rrr racing block

peterson dry sump

head package through crd, dirt garage or equivalent.

ross or ati balancer

arp studs throughout

adjustable cam gears

hks t51r turbo

id2000 injectors

larger fuel rail

or

RIPS engine package

or, let us know your goals and budget.

will help decide what to do.

Ive so far purchased cp forged pistons,spool rods,acl bearings,arp studs all round,jun oil pump, just need ideas on cam duration/lift and valve springs also what turbo to run with to get the most out the 26.

all good.

id love to be able to afford their gear too.

maybe one day.

maybe not.

theres a thread currently discussing pretty much this.

cant remember exactly where, bit some were saying you can get a racepace engine(yours rebuilt by them)for 10k incl parts and labour.

may be worth freighting it?

do you need turbo setup?

do you need fuel system?

now we know a rough budget, what do you want/need and what power goals are you aiming for?

Ive so far purchased cp forged pistons,spool rods,acl bearings,arp studs all round,jun oil pump, just need ideas on cam duration/lift and valve springs also what turbo to run with to get the most out the 26.

twins or single?

Be interested in looking into that thread if you happen to come across it.

Im hoping to get enough help through this thread from past experience builds so i know which direction on parts selection i should take on getting good power from a budget.

Am looking at getting rid of the twins and going single so turbo choice also would help.

  • 2 weeks later...

nitto stroker kit

nitto oil pump

nitto head gasket

rrr racing block

peterson dry sump

head package through crd, dirt garage or equivalent.

ross or ati balancer

arp studs throughout

adjustable cam gears

hks t51r turbo

id2000 injectors

larger fuel rail

or

RIPS engine package

or, let us know your goals and budget.

will help decide what to do.

Jesus creepers Luke! RRR block itself is rare as hens teeth yet alone $10k+ to procure .

be better off just getting N1 block from Just Jap cost like 2.6K.

I was under the impression that Dan was not doing engines and ERD anymore? Health Issues Maybe from what I recall?

Dan is still building engines as a sort of private on the side setup, from what i gather, but ERD itself is no more.

Probably a lot less messing around only doing engines.

  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm so far behind in the jobs I have to do at both work and home (including car) that I have become immortal. There's simply no way that I can die now.
    • Each to their own I guess  Me, I put just as much time into cleaning inside of the cars as I do on the outside As for getting wet, it is really no different than steam cleaning the carpets at home, apart from the cars carpet dries alot faster than the house, again, I only do it in the hotter months and leave the car opened up for a few hours As I only do it yearly, it is just before I do the diff and gearbox service, so I clean the carpets, then it's up on stands, wheels off, service, clean the undercarriage,  grease the bushings and do a nut and bolt check on everything  Disclaimer: I typically had all the time in the world to kill when I was working 馃ぃ, so spending a full day or 2 cleaning, serving and "looking at stuff" was,  easily achievable, and a fun mental therapy day As for time to kill, I retired last Wednesday, so apart from my physical training, my days are filled with lots of random jobs around the house and garden...."Idle hands are the Devils something something" I am also buying a new house sooner rather than later, I'm actually looking at a potential property tomorrow, I'm looking forward to getting a car hoist as I'm starting to get to old to crawl around under a car, I can only imagine all the undercarriage cleaning and looking at stuff when that gets set up
    • Yeah, I'm not interested in wetting the carpets, and I don't care about brown dirt/dust that lives deep in the pile or underneath. It's not like I crawl around on them in my birthday suit or eat dropped food off them (because there is never any open food in my car). The seats are alcantara (cheap Chinese imitation alcantara, to be sure!) with barely 1" of foam pad behind the surface. That's not getting wet either. Any car that I would be happy to get the interior wet, I would not care to put the effort into.
    • We have one that holds 2.8L of water. On floor carpet that hasn't been touched in 2 or 3 years, will take a minimum of 2 fills of the tank to do a bedroom, and that's going AROUND the bed.   In the cruiser, I used an ENTIRE 2.8L tank, just on the front passenger footwell. But it had some fungus growing, and had been full of mud from being used as a 4WD for many years. I can do that floor again, and it will still pull mud out. However, the water now only looks dirty, not pitch black and leaving full sludge in the bottom of the tank it sucks back into. Oh, and, this is about a $1500 unit.
    • This is mine, works a treat for the cars, suction is good, I use the Bissell clean and protect stuff I have found giving it a good spray and light scrub with the soft brush on the head of the nossle for carpet, and a rub with a microfibre for cloth seats and cloth door trims, prior to another quick spray before vacuuming it up works the best @GTSBoy You would surprised on what it gets out of carpet and seats that actually "look" clean, I recommend that you test drive yours when you have a little time to kill, then post pics of the muddy looking water that I believe you will find
  • Create New...