Jump to content
SAU Community

Recommended Posts

I just sold my Skyline one month ago and the owner has been away working and when he tried starting it the car it started than died. It wouldn't start at all after woulds and he flattened the battery twice trying to get it going. He got the vehicle towed to a mechanics and they have told him the car has no compression??? WTF could this be caused from washing the bores? Car ran fine and never blew smoke apart from being too rich at start up and idle it had no other issues

Link to comment
https://www.sau.com.au/forums/topic/426316-car-sat-for-a-month-wont-start/
Share on other sites

He got the vehicle towed to a mechanics and they have told him the car has no compression??? WTF could this be caused from washing the bores?

Bore wash increases wear to the bore so yes a loss of compression can happen

Sounds like the "Mechanic" doesn't know shit from sugar or he's trying one on.

Buyer drives it home, parks it, doesn't do anything else, a month later tries to start it to no avail.

- Replace Plugs ($25) n Battery ($150) with new. Try start it.

If indeed the compression is low (no compression - pfffft) it was farked before sold.

IMHO anyway.

Sounds like the "Mechanic" doesn't know shit from sugar or he's trying one on.

Buyer drives it home, parks it, doesn't do anything else, a month later tries to start it to no avail.

- Replace Plugs ($25) n Battery ($150) with new. Try start it.

If indeed the compression is low (no compression - pfffft) it was farked before sold.

IMHO anyway.

The mechanic doesn't know shit? but yet yet your giving him advice to spend 175$ on parts which may only turn out to be a further kick in the guts

Is this an RB20 or 25 at all? Sounds like the hydraulic lifters may have bled down due to sitting for too long. Just keep cranking, for no more than about 20secs at a time without letting the starter cool.

This is a easy

While he was away couple of hes pissed mates thought it was a great idea to take the skyline for a rap to Maccas to get a $2 cheeseburger or two

Nek Minit

Pushing it back where they got it from

  • Like 1

Are you certain the guy was actually away working? Maybe he is lying and just raped the car for a month and then it died. Either way, it's got nothing to do with you. As long as it was running when he drove away then anything that happens after that is his problem.

  • Like 1

Are you certain the guy was actually away working? Maybe he is lying and just raped the car for a month and then it died. Either way, it's got nothing to do with you. As long as it was running when he drove away then anything that happens after that is his problem.

Well said.

Simply put Yes I am. I believe the money is not wasted spent on these items. Not by the seller but by the buyer.

Cheaper option - clean existing plugs, swap in a battery from a mate and crank away....

-> Skyline works fine, not driven for a month, no compression - Some one is lying !!

If I didn't drive my GTR for a month. And then killed the battery twice trying to start it then I would do exactly what I advised.

My plugs will be fouled and my battery is likely also cactus. My compression would be 165-170 not 0psi

The mechanic doesn't know shit? but yet yet your giving him advice to spend 175$ on parts which may only turn out to be a further kick in the guts

  • Like 1

Maybe check the compression yourself to make sure, I can remember a similar thing with an r31 my bro owned, it ended up being a cracked cylinder head....

Edited by AngryRBGTX

Are you certain the guy was actually away working? Maybe he is lying and just raped the car for a month and then it died. Either way, it's got nothing to do with you. As long as it was running when he drove away then anything that happens after that is his problem.

so much this.

no compression?

so, not 1 cylinder has an ounce of pressure?

I find it very hard to believe.

maybe no fuel pressure?

in which case, fuel pump.

and it wouldn't start.

do the usual.

test fuel, test spark, actual comp test(with vid results), and go from there

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I couldn't agree more. I should have started from the get-go with a NEO or solid bucket conversion. I started looking into converting over to solid lifters yesterday. Now for some reason I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  But I see no mention of this on any of the Tomei documentation. It just states I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must me missing something? 
    • BRUH, one of the biggest mistakes of my life..... and i've had plenty ;[)
    • @Murray_Calavera iam just considering options 🙂 of course it is very expensive so that why i ask here 🙂  @joshuaho96 I looked at that GCG hybrid(i remember looking at it few weeks before) So this is "that" hybrid where i send them my turbo and they upgrade the inside to Garrett stuff and then they send it back. It cost around 1200-1300 USD which is FAR cheaper than the HKS and it is what iam looking for(i just do not have experience like this...to send something off to "upgrade" ) @tylink720 that is like 150 USD turbo no? 😄 I dont think i have the "ease on my mind" with this kind of turbo. I just put over 7000k USD to "LINK" up my engine...dont want to blow it up with cheap turbo 😄     EDIT: https://www.cj-motor.com/gcg-turbo-charger-for-nissan-rb20det-rb25det-high?srsltid=AfmBOooVeOZ6CZ6r1AIv5m-KPaa6BvudIPJTY8LW78khkd-gQlsaCht9 I looked at this and it seems ok? It is that CGC hybrid and it costs around 1250 USD (with back shipping). Do any of you have experience with this hybrid on NEO turbo? I quickly look thru the forum/web and it seems very good.
    • Echo the awesome sentiment 👍 Definitely a car worth saving. Looking forward to seeing updates as well. 
    • Scenic roads, stunning skylines, and Chickos to finish it off! Join SAU NSW as we cruise through the Royal National Park and along Lawrence Hargrave Drive to Figtree! Sunday 26th October 2025 4:30PM Meeting Waterfall Station Parking 5:00PM Cruise Departure Royal National Park > Lawrence Hargrave Dr > Memorial Dr > Sid Parrish Park 6:15PM Arrival at Sid Parrish Park Figtree Meet Location: Waterfall Station Parking Final Destination: Sid Parrish Park RSVP: https://forms.gle/E4s5SiRKQfDdypky8 *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
×
×
  • Create New...