Jump to content
SAU Community

Recommended Posts

I just sold my Skyline one month ago and the owner has been away working and when he tried starting it the car it started than died. It wouldn't start at all after woulds and he flattened the battery twice trying to get it going. He got the vehicle towed to a mechanics and they have told him the car has no compression??? WTF could this be caused from washing the bores? Car ran fine and never blew smoke apart from being too rich at start up and idle it had no other issues

Link to comment
https://www.sau.com.au/forums/topic/426316-car-sat-for-a-month-wont-start/
Share on other sites

He got the vehicle towed to a mechanics and they have told him the car has no compression??? WTF could this be caused from washing the bores?

Bore wash increases wear to the bore so yes a loss of compression can happen

Sounds like the "Mechanic" doesn't know shit from sugar or he's trying one on.

Buyer drives it home, parks it, doesn't do anything else, a month later tries to start it to no avail.

- Replace Plugs ($25) n Battery ($150) with new. Try start it.

If indeed the compression is low (no compression - pfffft) it was farked before sold.

IMHO anyway.

Sounds like the "Mechanic" doesn't know shit from sugar or he's trying one on.

Buyer drives it home, parks it, doesn't do anything else, a month later tries to start it to no avail.

- Replace Plugs ($25) n Battery ($150) with new. Try start it.

If indeed the compression is low (no compression - pfffft) it was farked before sold.

IMHO anyway.

The mechanic doesn't know shit? but yet yet your giving him advice to spend 175$ on parts which may only turn out to be a further kick in the guts

Is this an RB20 or 25 at all? Sounds like the hydraulic lifters may have bled down due to sitting for too long. Just keep cranking, for no more than about 20secs at a time without letting the starter cool.

This is a easy

While he was away couple of hes pissed mates thought it was a great idea to take the skyline for a rap to Maccas to get a $2 cheeseburger or two

Nek Minit

Pushing it back where they got it from

  • Like 1

Are you certain the guy was actually away working? Maybe he is lying and just raped the car for a month and then it died. Either way, it's got nothing to do with you. As long as it was running when he drove away then anything that happens after that is his problem.

  • Like 1

Are you certain the guy was actually away working? Maybe he is lying and just raped the car for a month and then it died. Either way, it's got nothing to do with you. As long as it was running when he drove away then anything that happens after that is his problem.

Well said.

Simply put Yes I am. I believe the money is not wasted spent on these items. Not by the seller but by the buyer.

Cheaper option - clean existing plugs, swap in a battery from a mate and crank away....

-> Skyline works fine, not driven for a month, no compression - Some one is lying !!

If I didn't drive my GTR for a month. And then killed the battery twice trying to start it then I would do exactly what I advised.

My plugs will be fouled and my battery is likely also cactus. My compression would be 165-170 not 0psi

The mechanic doesn't know shit? but yet yet your giving him advice to spend 175$ on parts which may only turn out to be a further kick in the guts

  • Like 1

Maybe check the compression yourself to make sure, I can remember a similar thing with an r31 my bro owned, it ended up being a cracked cylinder head....

Edited by AngryRBGTX

Are you certain the guy was actually away working? Maybe he is lying and just raped the car for a month and then it died. Either way, it's got nothing to do with you. As long as it was running when he drove away then anything that happens after that is his problem.

so much this.

no compression?

so, not 1 cylinder has an ounce of pressure?

I find it very hard to believe.

maybe no fuel pressure?

in which case, fuel pump.

and it wouldn't start.

do the usual.

test fuel, test spark, actual comp test(with vid results), and go from there

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The speedo's can be very conservative, when my Mazda NC MX5 speedo is showing 118kph, the GPS, and a calibrated radar.... cop mate.....hits me at around 110kph +/- 1 or 2 kph, and that is on a 215/45 17, stock tyres size is 205/45 17 as well, so weirdly conservative with stock tyre size When my Commodore speedo red 116kph GPS had me at 110kph After doing some offset and clearance measurements to see what can fit the NC on 17x8 +40, without guard rolling or rubbing anything at my current ride height, I've decided that when my tyres are toast, I'm going to fit 225/45 17 and see where that gets me IRT actual speed of my speedo and GPS/radar From the online calculator I should be still be doing around 5kph under an actual 110kph when the speedo is showing 110kph My ADHD requires that when I'm doing 110kph on the speedo, that the actual road speed is actually really close to that, and not alot slower And going from 205 to 225 still keeps the car within the %/mm allowable in the NSW vehicle rules and regulations, which is nice, as long as I'm looking at the latest version that is.....LOL https://www.nsw.gov.au/sites/default/files/2021-02/RMS-13.464-Light-vehicle-modifications-Vehicle-Standards-Information-No-6-November-2013.pdf
    • Take the value it measured as, and pick the closest range available that is above the reading on the screen.   Also, no point just testing the coils. Read what has been said again. You need to test all your wiring, everything.
    • Does the scanner do all the CUs in the car, or only the ECU?
    • @666DAN sorry to bring you and old thread.     I've got my de+t done and it's all running great other than 1 small issue.    Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd when selected . But nothing when in  drive or what gear your in when you pop it into tiptronic. I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Do ya have any ideas?     Cheers man
    • Well I recently changed my rear axles and was thinking if I bumped anything, I have been driving the car for a while now though... But it has been raining today so everything is wet under the wheel arches. Brakes feel fine and can't hear any of the metal screamers, I had a squeak coming from one of the handbrake drums but that seems to have gone away a while ago. I was going down a hill when it lit up and I did feel the abs bite for a second and question why it did it?
×
×
  • Create New...