Jump to content
SAU Community

Recommended Posts

98 mod series 2 rb25 engine and box out of my 40th ann R33 to suit s chassis

engine and transmission still in car and can be seen running, comes with everything from one

piece tailshaft to fmic (minus thermo"s) includes ceffy engine crossmember etc,

Engine,

98 series 2 highly modified

Hks gtrs turbo

Hks cams 256/264 with adjust cam gear (sounds lumpy)

Hks metal head gaskett

Hks 555 injectors

Hks V pro ecu (tuned using map sensor)

Hks ssqv bov

Hks EVC 5 boost controller

Hks intake pipe with Apexi air filter

Hks oil cooler large

Hks fuel pressure regulator

Hks gauges x 5 3d chrono type, exh temp,oil temp,oil press,fuel press & coolant temp including senders,wiring etc to operate

Hks turbo timer also monitors battery voltage

High flow intercooler

Alloy radiator

Nismo thermostate

Gates racing timing belt,pullies and water pump

Splitfire coil packs

ngk iridium plugs

Transmission

R33 box and shifter

Os giken super single clutch

Custom one piece tailshaft 3 inch with v8 spicer uni's

Car alsways well maintained with the best lubricants

probly forgot some stuff so contact me on 0417696770 with any questions during reasonable hours please

$6750 ono

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thank you, 100% the intent. New coils were due and the 17" sixers look/feel loads better than the stock wheels. The aero options are so spot on.   Thanks for the warm welcome, all!
    • 98 r34 gtt Been rocking my latest setup and car running like never before. Have put a good 200 miles on it since all the latest changes and additions. everything is dialed in and have been driving it a bunch.   However, all a sudden last weekend as soon as I pushed throttle passed 4k and the engine stumbles, (slow or fast acceleration) hesitates and doesn’t go above 4100 or so, like a misfire. Everything else seems fine. I had a “good” set of coil packs that I removed from car when I first got it when I changed them over to new coils. I swapped out current ones for those, but no change. I also changed the plugs, no change. Seems to rev over 4 when out of gear with no load just fine no “misfire”, but as soon as its in gear with a load of any kind, it “misfires” as soon as rpm drop back below 4 k it runs perfectly, smooth, starts, restarts and drives fine as long as I keep it below 4 k while in gear. All readings look fine, no CEL   Any idea as to what could all a sudden cause an issue when pushing rpms passed 4 k?
    • When you say your cams are 272/262 is that 272in and 262ex?
    • We're arguing semantics. I am saying 45 accel and a 55 deccel ramp are "2 ways". Even a 45 degree ramp and an 89 degree ramp is "2 ways", because it is literally... two ways. The cusco 55/30 ramp is a 2 way. It's two ways. I get it though - in normal nomenclature a "2 way" would be 45/45 or 55/55 or 60/60 i.e the same locking in both directions. And something like 45/65 would be considered "1.5 way". I would then say if we're getting into the nitty gritty then every locking diff is a "2 way" diff and we should not speak in 1.5, or 2 ways but ramp angles instead. Which ofc if one of those ramp angles is 90deg, that side is not doing any locking. :p So Nismo don't obviously sell 3 things. The fact of the matter that they only sell two items really goes to show that there's a 2 way and a "1,5 way" which is really a 1 way. I believe the actual lockup for the 'adjustability' of the GT pro is really just setting preload for when the ramps actually start locking up. It's not changing how much 'wayness' there is. It is (somehow) horribly explained. People just buy whatever diff and go "locks up good bruh" and that's what ends up on socials forever.  
×
×
  • Create New...