Jump to content
SAU Community

Recommended Posts

my mates done nearly the exactly the same as mine, less compression then mine, less aggressive cams and it made 180kw on 98 so that's why I was hoping for atleast 200 on e85, my engine builder is pretty positive it will make 200kw, but the proof is in the pudding!

Here is a photo of her in, heard her run for the first time today, I do have a video of it on my phone, will figure out how to get it onto here, tuning tomorrow, will try and get some video footage and decent non-phone photos sometime aswell.

34pxlbk.jpg

Dyno sheet - Mild Tune (will push it a bit later when its proven to be all well)
Engine torque is that divided by the diff ratio. 3.7 in this case
Annnd its on a hub Dyno hence the power curve "interuptions", if it was on a roller it would be smooth as silk.

208vh4y.jpg

Dyno sheet - Mild Tune (will push it a bit later when its proven to be all well)

Engine torque is that divided by the diff ratio. 3.7 in this case

Annnd its on a hub Dyno hence the power curve "interuptions", if it was on a roller it would be smooth as silk.

208vh4y.jpg

I can't read dyno sheets.. :(

Is that like 165kw?? :)

Edited by Zrobe

yeah mate 167.6 down the bottom

did end up making 170 odd by the end of the day, although I need to adjust the cam timing to get a few more revs out of her and upgrade the cat back exhaust, also tempted to get the throttle body's enlarged and sealed properly, one has a slight leak on idle causing a very minor miss, pretty sure EFI hardware will do that for me.

  • Like 1

That was just 98, E85 actually didn't make any more power but the car sounded a lot nicer, sounded smoother through the rev range aswell. which I was sort of disappointed by but in an NA build all gains are very minimal.

Not sure if this will work for most of you

https://www.facebook.com/photo.php?v=10151826649939459

Waiting for my go pro to be returned that I left at my friends place while I picked the car up so I can upload the video properly

Edited by Wayne.
  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I don't. I mean, mine's not a GTR, but it is a 32 with a lot of GTR stuff on it. But regardless, I typically buy from local suppliers. Getting stuff from Japan is seldom worth the pain. Buying from RHDJapan usually ends up in the final total of your basket being about double what you thought it would be, after all the bullshit fees and such are added on.
    • The hydrocarbon component of E10 can be shittier, and is in fact, shittier, than that used in normal 91RON fuel. That's because the octane boost provided by the ethanol allows them to use stuff that doesn't make the grade without the help. The 1c/L saving typically available on E10 is going to be massively overridden by the increased consumption caused by the ethanol and the crappier HC (ie the HCs will be less dense, meaning that there will definitely be less energy per unit volume than for more dense HCs). That is one of the reasons why P98 will return better fuel consumption than 91 does, even with the ignition timing completely fixed. There is more energy per unit volume because the HCs used in 98 are higher density than in the lawnmower fuel.
    • No, I'd suggest that that is the checklist for pneumatic/hydraulic adjustable systems. I would say, based on my years of reading and complying with Australian Standards and similar regulations, that the narrow interpretation of Clause 3.2 b would be the preferred/expected/intended one, by the author, and those using the standard. Wishful thinking need not apply.
    • Yes they do. For some maybe. But for those used the most by abusers, ie Skylines, the numbers are known. The stock eyebrow height for R32/3 Skylines is about 365/375mm or thereabouts. The minimum such heights are recorded in adjacent columns in the database.
    • Hmmm, interesting. Makes me wonder whether there is bias as well. It's the cheapest fuel, so it is used for all kinds of ill-maintained shitboxes which are bound to have issues regardless. Nicer cars tend to require higher octane rated fuel and can't use it anyway. FWIW, the official NSW E10 facts page is decent. 
×
×
  • Create New...