Jump to content
SAU Community

Recommended Posts

my mates done nearly the exactly the same as mine, less compression then mine, less aggressive cams and it made 180kw on 98 so that's why I was hoping for atleast 200 on e85, my engine builder is pretty positive it will make 200kw, but the proof is in the pudding!

Here is a photo of her in, heard her run for the first time today, I do have a video of it on my phone, will figure out how to get it onto here, tuning tomorrow, will try and get some video footage and decent non-phone photos sometime aswell.

34pxlbk.jpg

Dyno sheet - Mild Tune (will push it a bit later when its proven to be all well)
Engine torque is that divided by the diff ratio. 3.7 in this case
Annnd its on a hub Dyno hence the power curve "interuptions", if it was on a roller it would be smooth as silk.

208vh4y.jpg

Dyno sheet - Mild Tune (will push it a bit later when its proven to be all well)

Engine torque is that divided by the diff ratio. 3.7 in this case

Annnd its on a hub Dyno hence the power curve "interuptions", if it was on a roller it would be smooth as silk.

208vh4y.jpg

I can't read dyno sheets.. :(

Is that like 165kw?? :)

Edited by Zrobe

yeah mate 167.6 down the bottom

did end up making 170 odd by the end of the day, although I need to adjust the cam timing to get a few more revs out of her and upgrade the cat back exhaust, also tempted to get the throttle body's enlarged and sealed properly, one has a slight leak on idle causing a very minor miss, pretty sure EFI hardware will do that for me.

  • Like 1

That was just 98, E85 actually didn't make any more power but the car sounded a lot nicer, sounded smoother through the rev range aswell. which I was sort of disappointed by but in an NA build all gains are very minimal.

Not sure if this will work for most of you

https://www.facebook.com/photo.php?v=10151826649939459

Waiting for my go pro to be returned that I left at my friends place while I picked the car up so I can upload the video properly

Edited by Wayne.
  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I can ship Nismo floor mats to you: https://www.oemsoko.co.jp/products/nismo-floor-mats-for-skyline-r33-bcnr33-stagea-wgnc34?_pos=1&_sid=9278c1467&_ss=r  
    • Here's the link: https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6642/misc/G49?frame_no=WGNC34-137122 What you think about it? The same product i found on nengun: https://www.nengun.com/oem/parts/40567/MiPwn5qAMfCfmpxHNDnwn5q9MDAx8J-QiW9sZC1qcC0xMTAtRzQ5LS0wMDE/Floor+Carpet+%2F+Mat+2/0688339eba149c19 Bot i have spoken to 😅 ensured me, that mats are 100% original, oem product. I have my doubts. I also heard what you mentioned, that nengun often offers items that are actual not available... On the other hand mats i found on japanese yahoo or ebay are in poor condition and still quite expensive so i'd rather wait for some better offers. My location - Poland. We literaly don't have ANY market for used Stagea parts so need to search outside Europe.
    • You can’t see much on the other side as the lcd is there I don’t think it’s the same as the m33 beside it as the markings on top is not the same was hoping someone had a good quality photo or if they just happened to have the unit in hand, quickly take the cover off and take a photo to clearly show the marking on top to identify the diode   the unit is currently with an electronics repair shop so I can’t take another photo at the moment hopefully they are smart enough to know if it’s a zener diode or not
    • I'd be very surprised if you can buy new OEM mats. But if you can, I want some too!  Do you have links to the variations you found? Also, where are you located? I found that Nengun is happy to list items to purchase but when you do buy them you'll get an email that it's actually discontinued. As far as I know the variations in floor mats are different colour schemes as well as automatic and manual having a slightly different shape. The automatic ones fit into a manual car without issues, but I think you'd have trouble fitting the other way around. I have photos that show the shape difference if you care. FWIW I bought sets of used floor mats in decent condition at yahoo auctions.
    • Hi 🙋‍♂️. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? 😃  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this 🙏
×
×
  • Create New...