Jump to content
SAU Community

Recommended Posts

Car has started making epic squealing noises, and after an initial panic that it was turbo related, it looks like it's now alternator. Hopefully that proves right when I pull the belt off and check, but some basic tests show that it's most likely, and probably explains some battery deaths and other electrical issues.

I couldn't find a part number on here - surely someone has replaced an alternator on an M35? Anyone rebuilt one? Seems like bearings so we're tossing up rebuilding it and replacing the bearings depending on costs etc.

Everything in an alternator search seems to be RB... no VQ love.

Link to comment
https://www.sau.com.au/forums/topic/426890-m35-alternator/
Share on other sites

Surely Scott isn't the only one that knows.

If 350Z belts are the same as NM35 belts, I guess that means the alternator is probably the same (well, it looks like the VQ35HRs had a different alternator to the VQ35DEs, bu you get my point).

Looks like 350Z units are available out of the US for $150-200, or high amp versions for $200+.

Link to comment
https://www.sau.com.au/forums/topic/426890-m35-alternator/#findComment-6887839
Share on other sites

lol ok. He should have a couple.

Part number for VQ25DD and VQ35DE is 23100-CD010, Amayama have them for $507. Surely a VQ25DET would be the same as those two?

Fortunately it looks like its a standard Mitsubishi part, so bearings are available, part number 2312030R10 and 231200V017, Amayama flog them off for $25 or less per bearing (they want FIVE HUNDRED DORRAH for a complete alternator!).

Link to comment
https://www.sau.com.au/forums/topic/426890-m35-alternator/#findComment-6887868
Share on other sites

I have one here if you need it mate, otherwise rip it apart and check the bearing numbers, they should be available at the local bearing supplier...

I would be cleaning up the slip rings on a lathe and replacing the brushes if you can find them.

Link to comment
https://www.sau.com.au/forums/topic/426890-m35-alternator/#findComment-6887900
Share on other sites

Cheers mate. Dad's got a lathe so that should be fine. Not sure about brushes, might have to get a sparky to do that bit.

Sounds like there are a few 350Z owners in the states putting higher amperage units in for stereos etc. Not sure if that's worth doing at the same time, but seems like pulling it apart is going to be cheapest, easiest and quickest.

Link to comment
https://www.sau.com.au/forums/topic/426890-m35-alternator/#findComment-6887936
Share on other sites

Cheers Cam. First things first I'll rip it off and see if I can rebuild it with new bearings.

Funny thing is P/N 23100-AM610 can be found online from a bunch of places. Only two hits for 23100-AL31A, one being this page.

If it's the same as the V35 and Pathfinder, why wouldn't it be the same as 350Z different p/n, so must be different, maybe higher amperage?

Link to comment
https://www.sau.com.au/forums/topic/426890-m35-alternator/#findComment-6889394
Share on other sites

  • 2 years later...
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So..... it's going to be a heater hose or other coolant hose at the rear of the head/plenum. Or it's going to be one of the welch plugs on the back of the motor, which is a motor out thing to fix.
    • The oil pressure sensor for logging, does it happen to be the one that was slowly breaking out of the oil block? If it is,I would be ignoring your logs. You had a leak at the sensor which would mean it can't read accurately. It's a small hole at the sensor, and you had a small hole just before it, meaning you could have lost significant pressure reading.   As for brakes, if it's just fluid getting old, you won't necessarily end up with air sitting in the line. Bleed a shit tonne of fluid through so you effectively replace it and go again. Oh and, pay close attention to the pressure gauge while on track!
    • I don't know it is due to that. It could just be due to load on track being more than a dyno. But it would be nice to rule it out. We're talking a fraction of a second of pulling ~1 degree of timing. So it's not a lot, but I'd rather it be 0... Thicker oil isn't really a "bandaid" if it's oil that is going to run at 125C, is it? It will be thicker at 100 and thus at 125, where the 40 weight may not be as thick as one may like for that use. I already have a big pump that has been ported. They (They in this instance being the guy that built my heads) port them so they flow more at lower RPM but have a bypass spring that I believe is ~70psi. I have seen 70psi of oil pressure up top in the past, before I knew I had this leak. I have a 25 row oil cooler that takes up all the space in the driver side guard. It is interesting that GM themselves recommend 0-30 oil for their Vette applications. Unless you take it to the track where the official word is to put 20-50w oil in there, then take that back out after your track day is done and return to 0-30.
    • Nice, looks great. Nice work getting the factory parts also. Never know when you'll need them.
    • Thanks @jtha7 I will have a look around tomorrow but it is a prick of a spot. These are some photos i tried taking 
×
×
  • Create New...