Jump to content
SAU Community

Recommended Posts

Hi guy im looking at upgrading the turbo on my stock (beside Exshurst) r32 rb20det. Can you please give me a list on what supporting mods i should be looking at buying at the same time. I dont want to buy things i dont need at the moment just anything the motor and turbo will need to function easly eg (intercooler, injectors). Ive been looking at t3/t4 turbos with a high mount manifold. any help would be great thanks.

p.s. i dont know to much tech talk to please keep it simple

Edited by johnny_boi85
Link to comment
https://www.sau.com.au/forums/topic/427124-help-with-turbo-supporting-mods/
Share on other sites

go watch mighty car mods on youtube. itll be easier than the grief our gonna get on here from all the smart arses.

simply!?

rb25 turbo (highflowed)

braid oil and water lines for turbo.

injectors. 550cc lowest.

full 2.5 inch to 3inch turbo back exhaust.

front mount.

fuel pump.

aftermarket ecu or nistune.

gaskets studs etc etc. lots of kesh. and a tuner.

ve been looking at t3/t4 turbos with a high mount manifold.

------------------------------------------------------------------------------------------

Sometimes Ebay is your friend and sometimes it isn't. This is an example of ISN'T.

Definitely good advice to look at a quality hiflowed turbo if you are looking to keep costs down and visibility low.

go watch mighty car mods on youtube. itll be easier than the grief our gonna get on here from all the smart arses.

simply!?

rb25 turbo (highflowed)

braid oil and water lines for turbo.

injectors. 550cc lowest.

full 2.5 inch to 3inch turbo back exhaust.

front mount.

fuel pump.

aftermarket ecu or nistune.

gaskets studs etc etc. lots of kesh. and a tuner.

yer!!

like anyone is going to take advice from a commodore driver...

farking rain mate. i couldnt even keep up with you last night. i was fish tailing in 4th.

So was I ;)

I went to overtake someone in 5th and the rear end kicked out...had to change my daks when i got home...

really need to stick a quarter tonne weight in the back i think :/

So was I ;)

I went to overtake someone in 5th and the rear end kicked out...had to change my daks when i got home...

really need to stick a quarter tonne weight in the back i think :/

yea yours will be bad with no weight on it!

Hi guy im looking at upgrading the turbo on my stock (beside Exshurst) r32 rb20det. Can you please give me a list on what supporting mods i should be looking at buying at the same time. I dont want to buy things i dont need at the moment just anything the motor and turbo will need to function easly eg (intercooler, injectors). Ive been looking at t3/t4 turbos with a high mount manifold. any help would be great thanks.

p.s. i dont know to much tech talk to please keep it simple

How about reading the sticky at the top of the page "Rb20 Turbo Upgrade, All Dyno Results"

take the 3 hours and read it from start to finish, walk away enlightened!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sorry, are coilovers ACTUALLY ILLEGAL in NSW? They aren't in Vic, as long as they retain 70% of stock travel and the car is above 100mm off the ground. Does NSW actually have a law making coilovers actually illegal? RWC/Blue Slip/Engineering people not knowing the actual f**king laws boils my blood. Demand them to point to the documentation that states a coilover is illegal. (it may exist in NSW )
    • But seriously, can we ask for the results of the "tip a bottle of metho into a nearly empty tank" experiment?
    • Hang on. Let me get this straight. The desire is to have coilovers, BC in particular, to be MORE comfortable on Sydney roads than stock suspension? Well, that's obviously not right. BCs have crude damping design at the very best, and typically hard spring rates. BC stands for Billy Cart. And then, the desire is to put in some shitty old worn out stockers, to get it blue slipped and then put the BCs back in? And then.....what? Not worry about getting pulled up by the Plod? Because you seem to have raised a worry about paying for engineering (which actually does solve all your legality problems) and still getting pulled up.... but the only problem there is that if/when that happens you have to show your paperwork at the inspection station. Whereas, if you just swap in borrowed shitty old stockers to get it slipped now, and then you get defected in the future, you have to go find more shitty old stockers then too. You course of action looks like this set of options: Buy brand new stock type dampers, and springs. probably cost a bit more than $1k all up, but will last for the remaining life of the car. Put them in, pass inspection, drive on them forever more. Hell, they could even be really nice Bilsteins and Kings or other lower&stiffer springs if you wanted. Get the car engineered as is. ~$1k. Buy new Shockworks coilvers (or MCA) and also pay for engineering. You're spending a lot more here. But these will be the best things that you could drive around on.
    • Might be worthwhile hitting up Facebook's groups, I know most of them contain terrible people and scammers - however you might be able to find someone that's in Sydney with factory suspension you could purchase and/or hire. Just do not send any form of money anywhere, in person cash only.
×
×
  • Create New...