Jump to content
SAU Community

Recommended Posts

Hey everyone!

Its been way to long since a good Newcastle organised cruise, (mainly because all 5 of us have been busy as with other things). so this one has to be an awesome come back!

so the plan is, we will be doing the north section of putty road (as its the only part worth doing), instead of the boring hwy there and back were going to be going on some fun familiar roads to get there, basically trying to roll 3 cruises into 1 without going through a lot of petrol.

The route, makes for a 3 hour trip of fun!!!

ri6c0x.png

SYDNEY PEOPLE; if you want to meet up along the way just say where and write you on the attendance list so you don't get forgotten about, I recommend meeting at wollombi as the first half of putty rd is very boring and youll still get a lot of fun driving time. If not the halfway point on putty road will still get you a lot of driving and shit talking

an epic cruise for Sydney people will be old pac to peaks ridge to wollombi and continuing on with

Meet at 9am, to leave at 930, the drive takes 3 hours to get to the end point which is where we will be having lunch at singleton pub that weve been to before.

Meet point, United petrol station 971 Freemans Drive

2r62jr9.png

lots of parking space, looks to be a very generous driveway.

4s1g9j.png

We will be stopping if required to meet up with people from Sydney at wollombi and ofcoarse the putty half way point. the cruise is only 3 hours with 1 break so if you cant control your bladder youll have to catch up :P

Parking is limited in wollombi so id prefer not to stop, but if need be we will pull in at the pub, we just open the gate and drive into the meadow as does on previous cruises. hopefully we don't need to as id feel bad having 30 cars pull in just to take a piss and then leave without buying anything. PEOPLE WANTING TO JOIN HERE, BE HERE BY 10:10 SO IF WE SEE YOU, YOU CAN JUST JUMP ON THE END OF THE GROUP SO WE DONT NEED TO STOP.

2u7bsw0.png

This is the half way point on putty road if anyone doesn't know it. im sure well stay here for a good 30-1 hour talking crap. PEOPLE WANTING TO JOIN HERE, WE WILL ARRIVE AT AROUND 1130

qrdrsy.png

From putty, we will head to singleton for lunch at the albion pub! we will arrive at 1230 for all the snittys they have.

2uyrg3k.png

After lunch i'm guessing everyone will be splitting up, Sydney people down putty, central coast people down through Cessnock and Newcastle people through Branxton (or a little detour that I have in mind ;).

IT WILL BE A GREAT DAY!!! IT WILL BE A BAD DAY IF PEOPLE WITH THE WRONG ATTITUDE COME WITH EXCESSIVE REVING IN PUBLIC AREAS, BURNOUTS, DANGEROUS DRIVING.

were going to have fun, on some of the best roads in the state, we don't need idiots wrecking it.



Now THIS is how you do a cruise thread ;) nice word Jarrad.... Martin take notes :P

Remember guys this is just a meet'n'greet at this stage :yes: like minded guys driving the same road hehe

Now THIS is how you do a cruise thread ;) nice word Jarrad.... Martin take notes :P

Remember guys this is just a meet'n'greet at this stage :yes: like minded guys driving the same road hehe

Okay notes taken

I think J-Rad should do all the cruise threads from now on

And in like Flynn for this as well

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...