Jump to content
SAU Community

Recommended Posts

Hello everyone,

I ran a search and couldnt really come up with any deffinitive answers. I figured I'd start a post here to see if anyone had any advice and I will be updating with remedial actions. I'll start off with the car specs and then run you through the situation.

1992 BNR32 GTR, 108,000 km on stock RB26DETT

Mods include: Power FC, HKS pod filters, Koyo radiatior, HKS intercooler with hard pipes, ORC twin plate clutch.

The other day i took my car past 6000 rpms for the first time and the cat temp light flashed rapidly. after some research i learned that the powerfc will flash the cat temp light when there is a red flag for multiple reasons. One of them being engine knock.

I changed the display on my powerfc to display engine knock and found some disturbing results. At start up, the fc will read a high of 30 knock. After start up ill clear the display and at idle it will show knock between 1-8. normal diriving up to 3500 will show 8-15. 4500 will show 20-25. at 6000 it will show 61. My power fc is set flash the cat temp light at 60 nock so that would explain why it was flashig.

From my research I've learned that the Powerfc is not the most accurate device in displaying knock, and should only be used to give a general idea. I guess all im asking is what do you all think of this? How concerned should i be? I would rather have ZERO knock lol.

This weekend I will be compression testing the engine to get a better idea of where i stand. Hopefully the results wont be to bad. As long as its not to bad (155-175 psi on all cylinders) i plan to baby the car for the next two years and save $ for a new engine.

Any thoughts or advice is welcome. Thanks guys,

-Eric

I wouldn't be worried about 60 knock at 6000rpm either.

"i plan to baby the car for the next two years and save $ for a new engine". Good idea to plan for a rebuild.

Read up on the well documented oil starvation issue caused by the short nose crank, crank collar, OEM oil pump and subsequent failure of Big end bearing/s.

- Pre late 93 model R32 GTR's

This post is not meant to cause you undue concern, but rather give you information so that your aware, if not already aware.

Edit:

my compression test came back at 154 to 155 across all 6 prior to when I bought my 92 GTR in 2004 at 104,000kms.

Oil starvation and big end bearing failure within the first few months of ownership. I wasn't aware of this Achilles heel at the time.

Oil pressure gave no indication prior to failure.

Edited by Sinista32

Thanks for the heads up Sinista,

I have done some research on the Achilles Heel of the RB. My compression test didn't come back all that great...

1: 149 4: 149

2: 145 5: 145

3: 140 6: 140

lol planning for a rebuild! :thumbsup:

I believe the 2nd reason is

R32's restrictor in the head feed is too large and the return too small causing all the oil to stay up in the head too long and leaving nothing in the sump - Big end bearing Doh!

Most over fill a stocker by a half to a litre if they take it to the track.

I take it this was resolved in the 33?

Here say - I've also been given to understand the bolts attaching the oil pump can work loose causing failure.

There could be more reasons so I'm interested to hear also.

OP - just keep driving. With a safe tune and enough good oil that motor should last. Make sure the oil is never below the high mark, and if you track it, fill it up to the bottom of the top bump on the dipstick (IIRC about an extra litre). I have a 1990 and have tracked it plenty of times with no issue. The only fix i'm aware of in later 32s is the longer oil pump drive on the crank. There is a clear error in the design of the early cranks, but if you have a working harmonic balancer and dont limiter bash, it should last. I dont know of any design changes to fix oil starvation in the rb26's life.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...