Jump to content
SAU Community

Recommended Posts

hmmmm... i seem to be getting mixed results from this question... brendon from the SDU told me ages ago the 6x9s will fit no probs... and stated it in his website

http://www.geocities.com/brendonmoses/gts4page22.html

yet everyone else reckons they wont go in with out spacers.

anyone confirm either of these?

Trust me - I've just done it - 6x9's will not fit (in the rear) without radical rework. I just said 'stuff it' and bough the best pair of 6.5"s and put these in - However, they didn't go in factory - a bit of modding needed to be done.

Suffice to say now I have a biatching stereo.

Lose the 6*9's and put 6" in and put a 15" sub in the boot !!

BF

edit - I'm talking R33 BTW

OK, you may have been monitoring my progress of the stereo install - Well, I got it all done today , put it all back to gether and guess what - Wild engine/alternator noise.

Anyone recomend some power filters ???

OH, and BTW, yes I seperated the audio and power lines down alternate sides of the car.

Edit - SORRY - I thought I was posting new thread.... I'll try again !!!

Originally posted by mooks66  

no one uses 6x9s these days anyway. they're gay.  

:)

Not only are they gay, but they dont sound as good either. Sound travels in a spherical form thats why round speakers sound better.

6x9s will be louder though... good for hangin at maccas! :devfu:

Originally posted by riggaP

 

:)

Not only are they gay, but they dont sound as good either. Sound travels in a spherical form thats why round speakers sound better.  

6x9s will be louder though... good for hangin at maccas! :devfu:

lol welll im not really in for hanging at maccas but seeing as i want loud and already brought a pair of 300w pioneers i think i'll stick with em... sound quality comes from the 220w pioneer splits... i dont sit in the back... well i almost do... i only want the 6x9s for bass.

no not at all... my mate has them in his car and the cabin is a lot bigger and they throw out a nice amount... im not into cruising chapel with my windows down and subs in the boot... im no hero... i want a nice amount of sound which i know these will produce... if i wanted competition i would have weighed my car down with lots of subs and not bothered with any rear speakers.

any more problems with my decision?

what was yoru decision man? so your gonna go for 6x9s in the rears?

well if you have to, the kicker 6x9s produce good midbass =)

and see to kenwood, and pioneer too

if you have abit more money then theres brands such as focal/morel/boston that you could consider.

but if not, dont bother, chuck 6x9s in there and be happy with it, that way you wont weigh your car down.

by the time im done with my car i'll have around 200 kgs of stereo in it (including sound deadening)...

lol see thats exactly what i dont want... 200kgs of stereo... i just want some nice sound to listen to... dont want to have to fill the panels with concrete to create better sound and i need somewhere to stick my golf clubs.

i brought my speakers, amp and HU about 4 months b4 i got the car so im not really going to go out and buy new ones when they havent been opened :)

I have put my Pioneer 6x9's in the rear parcel shelf of my R32, on spacers. They just fit between the window, and the seat, theyre definately not coming out. They do certainly have a bit of bass, nothing like subs of course, but they were never meant to be like that anyways. I think it sounds good, for the simple system it is (Clarion CD deck, the aforementioned 6x9s, and kenwood 4x6 in the front)

But this way, no cutting of the rear shelf.

Steve

hay guys sorry just to confirm ?

i have bought my sound system but i havnt actually got the car hahahaha

well i got rockford splits 6" for the front Fusion ^" splits for the back Alpine V12 amp and a Fusion 1200watt sub 12" and box.

now i wnated to know iam preety sure about this but

the 180sx 94 + models have 6" in the doors and

6" at the back am i correct?

let me know guys hehe =)

I agree with inark....and have done the same thing....and have the same problem....dammit!

Everyone tells me some of the metal is gunna have to come out of the parcel tray. Does this reduce the rigidity of the car at all? If so would it be real bad? Maybe a rear strut brace...hmmm

  • 2 weeks later...

I am about to start fitting my stereo to my R33... do the Pioneer TS-C1625 6" splits fit in ok without cutting up the door steel, or trimming the door trim? I want to fit the speakers in the factory holes under the factory door trims.

Do I need 6" * 4"s to do this?

Thanks

Conrad

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...