Jump to content
SAU Community

Recommended Posts

Perhaps you have a blocked cat and this is what the sensor is telling you?

Wouldnt expect it to just all of a sudden block and cause the car not to start at all.

The sensor just unscrews from the cat. Mine still works (AFAIK anyway)

The sensor only makes the warning light come on on the dash, it doesn't send any signal to the ECU.

I changed my fried cat and couldn't get the sensor out so I just cut it and blocked the hole in the new cat with a bolt.

The light comes on and goes out when the car is started.

Your cat may be blocked, or your not starting problem could be totally unrelated...

Try removing the cat and starting the car, if it starts, smash the guts out of your cat, reinstall and buy a new cat ASAP.

Same problem with my car .

My car runs and drives fine tho,but the car wont idle for more than 5mins even after a drive and the owner told me the cat temp is not plugged in thats why its causing it to automatically shutdown or theres more to it than that? & the temp light is always on.

thats the light thats always onpost-112075-0-61525800-1372779439_thumb.jpg

any help would be great.

Yes that's my understanding of the R33 too.

In an R32 the cat over temp light is the check engine light so it does connect to the ecu for that purpose.

Can't understand people hacking wires.

Under the passenger seat you can UNPLUG the cat sensor wiring, no need for butchery.

Fit a grommet in the floor pan hole and it's looking good.

Well mods on the

-Full 3" exhaust

-Fuel pump

-pod filter

-TS boost T

stock everything.

idles fine n drives n sounds fine! But if i start the car let it idle it just won't idle for longer than 5mins its the same even after a drive it automatically turns off the car

But all electronics are on all i have to do is turn the key to the right n it starts again fine.

Try hard wiring the fuel pump using the 'how to', most aftermarket pumps don't like the low power supplied by the factory fuel pump controller. To test it you could run a temporary wire to the battery...

What pump did you install?

well this morning i started up to see how long it will run for

it ran for 12mins n could of kept going so believe it or not it didnt happen today

when i came back from work,it usually runs for a bit n shuts down this time it ran for a while till i got bored like wtf :closedeyes:

i bought the car with the fuel pump already installed.the last owner put it in and he said it holds up to 600hp i believe

Brand- no idea

i'll ask for details coz he said he would fix the shutting down problem anyway.

since he said its cat being unplugged,now i know its not im not happpy :verymad:

Reset the ECU. Quick to do and sometimes solves the problems.

Disconnect battery (negative terminal), Hold foot on brakes, flick lights on and off etc, basically just do whatever you can to drain any residual power.

Wait for 10 mins or so then plug the battery back in and start the car, go for a drive etc.

I'm not sure if the 10 mins of sitting is necessary but just to be sure

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...