Jump to content
SAU Community

Recommended Posts

even worse is why did they have to take out my intercooler?

They may have had to undo the engine mounts and move the motor around a little to get the box bolts so that would explain loosening the cooler.

Just don't get how the injectors would start leaking or why they would have had to be touched in any way.

They may have had to undo the engine mounts and move the motor around a little to get the box bolts so that would explain loosening the cooler.

Just don't get how the injectors would start leaking or why they would have had to be touched in any way.

Unless the back of the rail hit the firewall or something silly but its pretty unlikely!

just be careful what is said online as they can do you for deformation of character etc....

what r u on about, they can't do u 4 telling the truth about something when u have proof, that's the craziest thing I've ever heard. It's OP who actually has the right to sue the business the way they damaged his property and didn't provide the right service he payed 4, hopefully the loose there business license from this

what r u on about, they can't do u 4 telling the truth about something when u have proof, that's the craziest thing I've ever heard. It's OP who actually has the right to sue the business the way they damaged his property and didn't provide the right service he payed 4, hopefully the loose there business license from this

Actually they can because their is a lack of substantial evidence. Best case scenario, OP gets his case thrown out for naming and shaming. Worst case, they come after him for public defamation and loss of earnings.

What the OP needs to do is create substantial evidence as to how the work conducted by the workshop has destroyed the vehicle. When you factor in that it's a 10+ year old car, driven by someone who would be stereotyped as a 'hoon,' it makes the case a little harder. The onus will be on the OP to provide the required evidence which means talking to a proper mechanic and getting them to write up an expert witness testimonial which will explain in laymans terms why this shouldn't be happening.

what r u on about, they can't do u 4 telling the truth about something when u have proof, that's the craziest thing I've ever heard. It's OP who actually has the right to sue the business the way they damaged his property and didn't provide the right service he payed 4, hopefully the loose there business license from this

Actually they can. Hence the way OP has handled this in a professional manner!

Actually they can because their is a lack of substantial evidence. Best case scenario, OP gets his case thrown out for naming and shaming. Worst case, they come after him for public defamation and loss of earnings.

What the OP needs to do is create substantial evidence as to how the work conducted by the workshop has destroyed the vehicle. When you factor in that it's a 10+ year old car, driven by someone who would be stereotyped as a 'hoon,' it makes the case a little harder. The onus will be on the OP to provide the required evidence which means talking to a proper mechanic and getting them to write up an expert witness testimonial which will explain in laymans terms why this shouldn't be happening.

Lol my spelling was useless!

Working with lawyers you know you have given the shop first right of repair.

Contact fair trading and pursue this. It's not acceptable.

In the meantime have your skyline repaired or quoted by another reputable shop (Quote/Receipts)

Wait for the hearing and see how you go. I am sure you will do well.

I have seen 2 businesses in my area fold through lack of trade after similar poor workmanship :D

Your rant is perfectly valid and a number of us have experienced similar treatment and frustrations.

  • Like 1

Working with lawyers you know you have given the shop first right of repair.

Contact fair trading and pursue this. It's not acceptable.

In the meantime have your skyline repaired or quoted by another reputable shop (Quote/Receipts)

Wait for the hearing and see how you go. I am sure you will do well.

I have seen 2 businesses in my area fold through lack of trade after similar poor workmanship :D

Your rant is perfectly valid and a number of us have experienced similar treatment and frustrations.

Yup. This would be the way to handle it. It might be easier to go through QCAT?

Working with lawyers you know you have given the shop first right of repair.

Contact fair trading and pursue this. It's not acceptable.

In the meantime have your skyline repaired or quoted by another reputable shop (Quote/Receipts)

Wait for the hearing and see how you go. I am sure you will do well.

I have seen 2 businesses in my area fold through lack of trade after similar poor workmanship :D

Your rant is perfectly valid and a number of us have experienced similar treatment and frustrations.

This!

And yes, the shop i has issues with pretty much folded too!

Yup. This would be the way to handle it. It might be easier to go through QCAT?

Yes. http://www.qcat.qld.gov.au/about-qcat/publications/qcat-annual-report-2009-10/minor-civil-disputes-overview

MTAQ may also be able to help if the said shop is a member

I have 3 quick ones..

R32 skyline - Just bought it, had suspension looked at/identified + a rear strut bar fixed up (was missing bolts etc)

Mum drive it home.. Lol, still in my P's

Anyway noticed bonnet wasn't shut properly.. The dampening was the opposite to left/right haha and my bar wasn't touched. $180.... Took it back, all goods :)

Corolla - got wheels put on, woke up to go to work, wheel fell off, f*cked my hub n sh!t they were alright.. Payed for it to get fixed :)

Ford festiva 93 (first car) - regular service, engine seized about 20ks down the road...

This was my fault apparently... Worst service ever, I knew as soon as I went in ahaha, oh well.

Sump bolt wasn't tightend? Or they just didn't bother to fill her up.. I'm not sure $270

BUT.. Get this haha someone rear ended the poor little festy and I got insurance ahahaa! Woo

Edited by Zrobe

Maybe the workshop identified who 1st built your car ( Coil Cover ) and decided to dick you around because the workshop you went to got burned and dicked around by the other shop displayed on your cover ....no names.

Just a thought nothing aimed at you mate.

still...thats not professional. y shd they mess with him just because previously he went to a workshop they didnt like?

exactly as you said, it's not professional.

some shops are quite childish.

and its only a theory.

isnt it?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You're going to miss not worrying about rust in the strut towers like the Skyline shitboxes out there
    • A few little updates that weren't filmed due to not taking long to do or not interesting enough for their own video. My new K&N Air Filter arrived, I went with an RU-4180 which matched the dimensions of the universal cone filter the car originally had.  The battery had gone flat, while that was charging I tidied up the spaghetti wiring at the bulk head and down the sides of the engine Next job was to swap the stereo The Kenwood harness had the female ISO plugs cut off and the male ISO plugs cut off the adaptor loom and joined with bullet connectors. I ordered in a repair loom through work and re-did it all. New Kenwood unit installed (Android Auto, DAB, Bluetooth, Reverse Camera) The bonnet/hood gas struts have been poor since collecting the car. I couldn't find any suitable replacements locally so took a chance on a pair from AliExpress.  The originals don't use a retaining clip to secure the cup onto the ball fixture, would explain why I struggled for 10-15mins trying to pry off the cups. The ball fixtures unscrew using a 12mm spanner, new ones are the same size. Sadly no photo of them fitted, you're not missing much lol The dished Momo steering wheel got replaced with my Momo Tuner, turns out I ordered counter sunk bolts for the horn trim ring (like they normally are for the steering wheel) instead of allen cap (flat seat)  A terrible photo of a Quaife style gear shift knob I've had stashed in my tool box for many years after purchasing the incorrect thread size (I can see a pattern emerging with ordering incorrect parts...) Also threw in a cup holder and a (empty) Boss Coffee can, because why not  
    • GT-R clearly the better choice! The 300 is certainly not insaly fast but has a decent amount of poke. Does a nice little drift around the corners with a decent amount of throttle. It's VERY predictable in a slide too.  Feels so progressive! People probably presume there's a 25 year old driving it based on my behaviour this week! 🤣
    • Yeah Jap import. Fairlady Z then! I'm a bit the same.  They've been on my radar for a fair while but then just impulsively decided to buy one!  Was going to just buy an NA and add turbos to it later but decided to save the f'ing around and just buy the turbo version. 
    • Thanks mate, well done to you too! Yeah not looking forward to doing any major work to it!
×
×
  • Create New...