Jump to content
SAU Community

Recommended Posts

Yep it sounds good from that perspective. What I was wondering is whether having a bed that is effectively uneven (assuming the rear wheels remain on the dropped part) makes it hard to push on/adjust location/hold while tying down etc etc.

My trailer has 3 metre ramps

They are awesome for lowered cars

No need for the beaver tail when you have very long ramps

I assume these slide up the length of the trailer and just slide out into position?

I saw a dodgy pic in your thread but didn't show too much... Needs moar pics :P

I had to go bever tail, 2.4mtr ramps, 100mm drop axles and also welded on top of the trailer bed sections of boxed gal steel so the car sat higher. Also heavily modified the trailer wheel arches so I could open the doors when I put the car on the trailer.

The tilta trailer and Nevco are way more expensive but I can see the less hassle from them.

SO I ENDED UP GETTING A 14FT X 6.6 FT TRAILER WITH BEAVER TAIL AND TYER RACK AND WINCH POST - CAME WITH WHEELS (DONT LAUGH SOME PLACES CHARGE FOR THEM) AND A SPEAR AND JOCKEY WHEEL AND RAMPS SLIDE UNDER THE TRAILER - I PAID $3250 DRIVEAWAY WITH NSW REGO WAS ABOUT $3500 IM AT WORK BUT I WILL POST A PIC TONIGHT -

I HAVENT HAVE ALOT OF EXERIENCE WITH CAR TRAILERS BUT THIS IS SO FAR THE BEST I HAVE USED DRIVES VERY WELL I WAS IN PEAK HOUR TRAFFIC IN SYDNEY WHEN I GOT IT HARDLY NOTICED AND DIDNT SWAY AT ALL ON THE HIGHWAY FROM HOME - FROM MARIO TRAILERS IS WHERE I PURCHASED IT - THEY WERE CHEAPST BY 2-300.

TILTAS TO LOOK GO BUT GOTTA HAVE THAT TYPE OF CASH - I ONLY JUST BROUGHT IT HOME SO HAVNT PLAYED WITH IT YET BUT SO FAR SO GOOD

SO I ENDED UP GETTING A 14FT X 6.6 FT TRAILER WITH BEAVER TAIL AND TYER RACK AND WINCH POST - CAME WITH WHEELS (DONT LAUGH SOME PLACES CHARGE FOR THEM) AND A SPEAR AND JOCKEY WHEEL AND RAMPS SLIDE UNDER THE TRAILER - I PAID $3250 DRIVEAWAY WITH NSW REGO WAS ABOUT $3500 IM AT WORK BUT I WILL POST A PIC TONIGHT -

I HAVENT HAVE ALOT OF EXERIENCE WITH CAR TRAILERS BUT THIS IS SO FAR THE BEST I HAVE USED DRIVES VERY WELL I WAS IN PEAK HOUR TRAFFIC IN SYDNEY WHEN I GOT IT HARDLY NOTICED AND DIDNT SWAY AT ALL ON THE HIGHWAY FROM HOME - FROM MARIO TRAILERS IS WHERE I PURCHASED IT - THEY WERE CHEAPST BY 2-300.

TILTAS TO LOOK GO BUT GOTTA HAVE THAT TYPE OF CASH - I ONLY JUST BROUGHT IT HOME SO HAVNT PLAYED WITH IT YET BUT SO FAR SO GOOD

STOP YELLING :rant: lol

Those Mario trailers sure do look cheaper than most around, my missus spotted them a while back but after reading the guys advice above about steering clear of cheaper ebay spec trailers as long term they cause more hassle then they are worth, we decided to look locally and custom...

Post some pics so we can get a look ;)

I WILL !!!!!!!!!

sorry i work with caps on wasnt even watching lol

Mario trailers isnt ebay spec? if thats what you were saying,

like i said i havnt put the car on it at all yet but so far all signs are good - picks tonight

Lol

Not picking on Mario Trailers, just that we found them on ebay in the same price range as the others (Hence why i said ebay spec haha).... They may be better quality, i have never seen one and as you can see by me being in this thread, i have no farkin idea about trailers either lol

The reason i am worried about quality as its first real run is going to be from NSW --> SA --> VIC back to NSW for the SAU NATS!

Looking forward to more detail and feedback!

yeah same her i have no idea on spec as well -

i mainly focused on the top and the weights to make sure tow was safe ect - when it comes to breaks and things from what i read most ppl have different views -

but so far carless drive trailer was very good - and the rta i went to in sydney said they were getting customers from mario trailers every day -

ranging from car - camper to box ect - and the lady at marios said shed had 3 ppl from canberra enquire and 5 purchases - thats gotta be a good sign - soon as im home wil post some pics

Edited by Reese69

Lol

Not picking on Mario Trailers, just that we found them on ebay in the same price range as the others (Hence why i said ebay spec haha).... They may be better quality, i have never seen one and as you can see by me being in this thread, i have no farkin idea about trailers either lol

The reason i am worried about quality as its first real run is going to be from NSW --> SA --> VIC back to NSW for the SAU NATS!

Looking forward to more detail and feedback!

matt im in the same boat as you.

im looking at getting a trailer and first run is vic to sa then back!

im looking at going a tilt trailer with a hyraulic ram at the front so i can load unload my car anywere.

i hire a servo trailer atm and its so hard to get on and off, only certain places i can take it off and on.

yeah on that....servo trailers are almost always death traps. while you might use one to move something around town if you needed to, taking one on a long drive is likely to end in tears.

they are heavy, often have bent axles/bad alignment, cheap tyres, unmaintained hubs etc etc. I have seen some that are brand new which would probably be OK if you are lucky to get in before some other mug bends it, but most of them are terrible.

duncan, i hate using the servo trailer but ive had to in the past because lack of funds,

but now im going to buy a hydraulic ram tilta because servo trailers are 'death traps' as you put it.

what do people think of the hyraulic ram tilta trailers? i can get a brand new un painted tilta with the

ram and ramps and no lighting, half floor no sides, low guards, hydraulic brakes, 100mm drop axles for $2800 ?????

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...