Jump to content
SAU Community

R32 Gtr Caliper Bolts Specs?

R32GOJIRA
 Share

Recommended Posts

R32GOJIRA Mentor

R32GOJIRA

Posted
Posted

Ok Here Goes.

I am currently coming to the pointy end of my brake upgrade. But as luck would have it, i need to finalise some details, and my car is not currently at home, so it makes this just a little harder than usual.

I need to know the factory sumitomo caliper bolt specs for an R32 GTR, size, pitch, and length for both front and rear.

After hours of searching the interwebz, and sifting through a whole heap of useless shit, this is what I have come up with.

Front:

Size M12

Pitch 1.25

Length ???

Rear:

Size M10 ???? (I have read both M12 and M10, so I need to confirm)

Pitch 1.25 ???

Length ???

Also can someone tell me what the caliper flange thickness is on both the front and rear sumitomo calipers??

Once I can confirm these details, my caliper brackets can be made and I shall enjoy copious amounts of braking power.

Any help would be appreciated.

Cheers

Damo.

Link to comment
https://www.sau.com.au/forums/topic/428802-r32-gtr-caliper-bolts-specs/
Share on other sites
djr81 Grand Master

djr81

Posted
Posted

Pitch is 1.25 front and rear.

Bolts on an R34 are a size bigger than the 32's so may be adding to your confusion. I dont remember them as 10mm - thought they were 12 as per the fronts.

As for length - get a machine bolt ie one threaded all the way along its length and cut it to suit. You probably wont get the exact length you need anyway.

You havent mentioned grade either - 4.6 or 8.8?

Cant help you with the thickness of the flanges, sorry.

R32GOJIRA Mentor

R32GOJIRA

Posted
  • Author
Posted

Well the whole point of this is, I would like to use the original factory bolts and get the brackets made to suit. Hence the reason i need this info to be 100%.

But I cant get them off of my car as it is in a workshop about an hour and a half away from home.

As for the length, i wanted to know that for the thickness of bracket, same reason for the flange thickness.

R32GOJIRA Mentor

R32GOJIRA

Posted
  • Author
Posted

I dont need to buy another set of bolts, I just need the specs.

I have a set on my car and want to use those, but i dont have access to them to get the specs to give to the guy designing my caliper brackets, who by the way is on the other side of Australia, so I cant just give him the bolt.

R32GOJIRA Mentor

R32GOJIRA

Posted
  • Author
Posted

Already thought of that and asked, they take their sweet ass time with everything, and thought this avenue would be faster, as the guy designing the brackets is going on a few weeks holiday as of tomorrow. So need to get the specs to him by this arvo or I'll be put back a few weeks.

Time is of the essence lol.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MissMintyR33
      R33 persistent issues. P/steering and lag/misfire

      By MissMintyR33 · Posted

      I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • jtha7
      Strange issue RB25DET wont start

      By jtha7 · Posted

      Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • jtha7
      Strange issue RB25DET wont start

      By jtha7 · Posted

      Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
    • GTSBoy
      Freddy Plenum vs Genuine options RB25

      By GTSBoy · Posted

      My return flow is custom and puts the return behind the reo, instead of at the bottom. All my core is in the air flow, rather than losing some of it up behind the reo. I realise that the core really acts more as a spiky heatsink than as a constant rate heat exchanger, and that therefore size is important.... but mine fits everything I needed and wanted without having to cut anything, and that's worth something too. And there won't be a hot patch of core up behind the reo after every hit, releasing heat back into the intake air.
    • Murray_Calavera
      R33 persistent issues. P/steering and lag/misfire

      By Murray_Calavera · Posted

      There is a really fun solution to this problem, buy a Haltech (or ECU of your choice) and put the MAF in the bin.  I'm assuming your going to want more power in future, so you'll need to get the ECU at some stage. I'd put the new MAF money towards the new ECU. 
×
×
  • Create New...