Jump to content
SAU Community

Recommended Posts

Aftermarket Leather seats no rails $280 pair VGC

post-44496-0-61950400-1374043499_thumb.jpg


R32 boot trim GC $30 (sides plastic lips also have plastic trim clips)

post-44496-0-61399400-1374043523_thumb.jpg


R32 genuine nissan floor mat centre rear $10
RB20 engine mount brackets $20
RB20 power steering pump, A/C, and adjuster bracket $10ea
SR20 Rocker cover painted gloss red pearl $80

post-44496-0-68205700-1374043562_thumb.jpg


12" thermo fan VGC $20
R32 "SKYLINE" sil trims $20 pair
R32 Handbrake complete assy, VGC $40
R32 Number plate lights $10
R32 VGC Roof handle $10
R32 GTR Speedo Drive Cable VGC only used for 1000kms $100 (Purchased new $170)

post-44496-0-06384500-1374043473_thumb.jpg


RB26DETT manifolds and dump pipes standard $20 all four
RB20, 25, 26 G/box-Block spacer plate $40
R32 front guards vented, VGC very high quality from japan standard width $220

post-44496-0-23144100-1374043609_thumb.jpg


HKS super dragger exhaust cat back to suit r32, r33, r34 GC $200
RB20, 25, 26 Flywheel with clutch bolts, needs machining $40
RB20/25 turbo dump pipe std $10
R32 clutch master GC $60
R32 ecu plastic trim cover VGC $10
R32 GTR Diff gears 4.375 Crown wheel bolts and pinion VGC, $150

post-44496-0-99174700-1374043405_thumb.jpg


R32 L/H indicator, top clip broken otherwise GC excellent lens, $20, easily fixed

post-44496-0-40673300-1374043443_thumb.jpg


R32/33 GTR Power FC D-Jetro, currently not working, $150
R32/S13 Hicas Lock Bar brand new $60
R32 GTR Transfer shaft and tailshaft $80ea

post-44496-0-08863500-1374043013_thumb.jpg


RB20 valley cover $10
R32 bonnet stick with rubber bung $10
Alloy Air duct for front bar to brake cooling $20 will suit any car
Oil catch can $20 brand new

post-44496-0-64273700-1374043143_thumb.jpg


R32 clutch fan $15
SR20 clutch fan $15
brand new fire extinguisher $10
R32 gtr L/H/F axle $80
Sr20 manifold with Hyflow turbo good for 350hp, no play sideways but back and forward there is a bit, however with oil pressure runs fine, no leaks, holds pressure very well $100


Drift pod $10
RB20 'avg condition' R32 top timing cover $20
R32 window wipers front GC $60 pair

post-44496-0-08557200-1374042869_thumb.jpg


Window washer bag with pump $10
Genuine nissan factory flare from R32 GTR unused very rare, $40 (sits on ecu trim)
R32 GTST front horn support with horn $20

post-44496-0-31523800-1374042838_thumb.jpg


R32 Radiator top mounts $10
R32 GTST A/C unit cover plate $10
R32 GTST cluster 135xxx on the clock $20

post-44496-0-33994700-1374042501_thumb.jpg


Rb20 rear timing cover plate (behind cam gears) GC $10 (may fit 25,26)
R32 interior trim piece under drivers dash $15 GC

post-44496-0-01187000-1374042487_thumb.jpg


Power Fc hand controller excellent cond. barely used Fcc3 model suits all late model Pwr FC's $250
R32 GTR RB26DETT engine loom avg condition perfect working order $100
Oil cooler with relocater plate $140 speedflow fittings
R32 A/C system every single part in engine bay, pipes pump condenser bracket absolutely everything to replace $250

please txt or call johnny 0414596256
Prices negotiable, feel free to ask questions, further pictures on request, located gold coast & have some other parts also!

Rear cannon part of exhaust is sold, I have only the intermediate part which is from cat to rear cannon includes a muffler, and it is 3 inch

post-44496-0-60034700-1374193787_thumb.jpg

Also quick update! R32 GTR rear diff gears for sale are 4.11 ratio (factory gtr ratio) 37 tooth crown wheel and 9 tooth pinion

sold me coil-overs that he said were in good condition with genuine spanners. Once I got them there were no spanners and he said they weren't included. The collars were that seized 2 of them broke trying to un-seize them. Put them in and they are stuffed knock like crazy! the steering wheel he also noted was in good condition, got It and the stitching is coming away over the top of the wheel.

I wouldn't buy parts from him by believing his description, view in person.

  • 4 months later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Was going to say the car pulls up nicely everywhere, especially going into that last long right hander before the main straight. Looks like a lot of fun.
    • Hey Dave, welcome aboard! Good to see another soon-to-be Stagea owner here. The wagons are awesome — plenty of space, still got that Skyline DNA, and loads of potential if you’re into mods. Definitely post up pics when you get it, everyone here loves seeing new builds. What model/year are you looking at?
    • See if you can thermal epoxy a heatsink or two onto it?
    • The other problem was one of those "oh shit we are going to die moments". Basically the high spec Q50s have a full electric steering rack, and the povo ones had a regular hydraulic rack with an electric pump.  So couple of laps into session 5 as I came into turn 2 (big run off now, happily), the dash turned into a christmas tree and the steering became super heavy and I went well off. I assumed it was a tyre failure so limped to the pits, but everything was OK. But....the master warning light was still on so I checked the DTCs and saw – C13E6 “Heat Protection”. Yes, that bloody steering rack computer sitting where the oil cooler should be has its own sensors and error logic, and decided I was using the steering wheel too much. I really appreciated the helpful information in the manual (my bold) POSSIBLE CAUSE • Continuing the overloading steering (Sports driving in the circuit etc,) “DATA MONITOR” >> “C/M TEMPERATURE”. The rise of steering force motor internal temperature caused the protection function to operate. This is not a system malfunction. INSPECTION END So, basically the electric motor in the steering rack got to 150c, and it decided to shut down without warning for my safety. Didn't feel safe. Short term I'll see if I can duct some air to that motor (the engine bay is sealed pretty tight). Long term, depending on how often this happens, I'll look into swapping the povo spec electric/hydraulic rack in. While the rack should be fine the power supply to the pump will be a pain and might be best to deal with it when I add a PDM.
    • And finally, 2 problems I really need to sort.  Firstly as Matt said the auto trans is not happy as it gets hot - I couldn't log the temps but the gauge showed 90o. On the first day I took it out back in Feb, because the coolant was getting hot I never got to any auto trans issues; but on this day by late session 3 and then really clearly in 4 and 5 as it got hotter it just would not shift up. You can hear the issue really clearly at 12:55 and 16:20 on the vid. So the good news is, literally this week Ecutek finally released tuning for the jatco 7 speed. I'll have a chat to Racebox and see what they can do electrically to keep it cooler and to get the gears, if anything. That will likely take some R&D and can only really happen on track as it never gets even warm with road use. I've also picked up some eye wateringly expensive Redline D6 ATF to try, it had the highest viscosity I could find at 100o so we will see if that helps (just waiting for some oil pan gaskets so I can change it properly). If neither of those work I need to remove the coolant/trans interwarmer and the radiator cooler and go to an external cooler....somewhere.....(goodbye washer reservoir?), and if that fails give up on this mad idea and wait for Nissan to release the manual 400R
×
×
  • Create New...