Jump to content
SAU Community

Recommended Posts

Hello.

Ive found a nice m35 3.5lt rwd

My questions are

What have u guys paid for these b4?

Chain tensioner- how many ks until it needs looking at?

How is the timing adjusted on these? Automatic or manually?

Where can i get a rear boot matt from?

Common issues...

Do these suffer the rear end issues the earlier m35s had?

Anything i need to specifically look at?

I know electrics can be a prick on these,

How common, and what sorts of failures have you come across?

Rear tyre ware bad? And is fuel really 11.5 km/100? (Of course there are many factors but as a general guide?)

If/when i get it, ill budget for this,

Transport (syd to melb -who have we all used)

Travel to and from on a plane

Spark plugs

Engine oil and filter

O2 sensor (what one do i use? 350z?)

Brake fluid - check brakes

Power steer

Flush coolant

Rwc, rego, stamp duty

Insurance

Epic alarm

Cant think of much eles to ask atm. Any info is great!

In terms of mods, i dont need power, torque,looks.

I want comfort and fuel economy.

Is there a nice set of coilovers that are quite comfy?

And is there alot to gain with exhaust mods. (Dont want it louder than it is)

Thanx all

Link to comment
https://www.sau.com.au/forums/topic/428945-vq35de-and-m35-axis-help/
Share on other sites

Please see answers in caps. Sorry, not intending to interwebz shout, just easier for you too see and read ;)

Hello.

Ive found a nice m35 3.5lt rwd

My questions are

What have u guys paid for these b4? WHATEVER ITS WORTH.

Chain tensioner- how many ks until it needs looking at? 250,000+ I'M GUESSING. DEPENDS ON SERVICING

How is the timing adjusted on these? Automatic or manually? AUTOMATICALLY

Where can i get a rear boot matt from? YAJ/STREETER/IM

Common issues...

Do these suffer the rear end issues the earlier m35s had? DEFINE ISSUE PLS

Anything i need to specifically look at? SAME AS ANY OTHER USED CAR

I know electrics can be a prick on these,
How common, and what sorts of failures have you come across? NOT PERSONALLY, BUT ENGINE CAM/CRANK SENSORS, INTERIOR SCREEN

Rear tyre ware bad? And is fuel really 11.5 km/100? (Of course there are many factors but as a general guide?) NO IF ALIGNED CORRECTLY, AND YES, I'D BE STOKED WITH 11.5. MINE DOES SHORT TRIPS AND IS ABOUT 14/100. ON THE FREEWAY A BIT BELOW 10

If/when i get it, ill budget for this,

Transport (syd to melb -who have we all used)
Travel to and from on a plane
Spark plugs
Engine oil and filter
O2 sensor (what one do i use? 350z?) GOING TO REPLACE ALL 4....? MIGHT GET EXPENSIVE....
Brake fluid - check brakes
Power steer
Flush coolant
Rwc, rego, stamp duty
Insurance
Epic alarm


Cant think of much eles to ask atm. Any info is great!

In terms of mods, i dont need power, torque,looks.

I want comfort and fuel economy.

Is there a nice set of coilovers that are quite comfy? READ WHAT YOU WROTE IN THE PREVIOUS 2 LINES - WHY WOULD YOU WANT COILOVERS...?

And is there alot to gain with exhaust mods. (Dont want it louder than it is) NO

Thanx all

In terms of coils, im thinking of shagged out stockies not being any good, due to age, kms, and conditions

M35 issues are rear cradle mainly. Turbo also but this is N/A

The screen is it a pixle issue, or just dies? Easy to come by?

And is the cam sensor a prick to swap or is it not too hard?

In terms of coils, im thinking of shagged out stockies not being any good, due to age, kms, and conditions

Bc coil overs is what most run when they get them. They aren't harsh, but if you can get your hands on bilstein shocks, you'll be pleased. There are a lot of options

M35 issues are rear cradle mainly. Turbo also but this is N/A

Haven't heard of a cracked pm35. Some theory is that hicas increases the chance of crack, but overloading and rough roads stiff springs is a bad combo. It's a simple fix. Weld it if cracked.

The screen is it a pixle issue, or just dies? Easy to come by?

The motor that makes the screen go up and down can be temperamental. Haven't heard of replacement, but wouldn't be simple

And is the cam sensor a prick to swap or is it not too hard?

Easy enough for a confident home mechanic. Back of either head, and in the bell housing.

I need a bloody matt for the back.

The bulldogs claws dont like leather

There are few on importmonster about 60-80 plus postage. If not got to clark rubber and make one out of thin rubber. I think scotty nm35 got his made up if I remeber about a year ago if I remember correctly.

Keep us posted with how you go Chef.

I'm interested too, the simplicity of PNM35's really appeals to me as I don't drive in snow/icy conditions. Non turbo is a big win also given how "one of a kind" the NM35 turbos are.

Without driving one it's hard to know how they are power wise - reading the specs a bit more than the NM35's from factory but obviously a lot easier to pull more out of a NM35 without more major modifications (bolt ons, mainly).

My other concern is fuel economy. I used to get excellent economy out of my NM35 - just over 10L/100km around town assuming I was wearing my sensible pants and as low as 8L-9L/100km on the highway without air cond.

I think if I bought a PNM35 I'd be organising a remap for it so I'd be hoping that I would be able to get those sort of economy figures out of one.

Keep us posted with how you go Chef.

I'm interested too, the simplicity of PNM35's really appeals to me as I don't drive in snow/icy conditions. Non turbo is a big win also given how "one of a kind" the NM35 turbos are.

Without driving one it's hard to know how they are power wise - reading the specs a bit more than the NM35's from factory but obviously a lot easier to pull more out of a NM35 without more major modifications (bolt ons, mainly).

My other concern is fuel economy. I used to get excellent economy out of my NM35 - just over 10L/100km around town assuming I was wearing my sensible pants and as low as 8L-9L/100km on the highway without air cond.

I think if I bought a PNM35 I'd be organising a remap for it so I'd be hoping that I would be able to get those sort of economy figures out of one.

:/ remap for fuel economy? Isn't it expensive just to do a remap for fuel economy? and you might not get what you'd be hoping for, wouldn't it be cheaper to get it gas converted?

I'm a 4th year apprentice, I also have another job, completely independent. I manage 250km to 270km for half a tank on average and the car is my daily, it's hell unpractical as a daily, but I love the car to bits reason being it offers soo much and for me they outweigh the cost of running the thing and I'm not just talking fuel economy. If I wanted a car that was big, fuel economic and would save more money compared to a PNM35 I'd be looking at probably a diesel wagon or an SV6 or something...

You'd probably save more by spending 100$ a week at Coles or Woolies and use the fuel discount rather than a remap or get another NM35 as the savings of fuel you get over a year you can budget for tubz? Then next year with the same savings you can get a couple AFMs as spares.

Not trying to talk you out of PNM35's but one thing they ain't is economic :P.

But on to the mechanical issues, the only issue I've had was a split CV boot, the rear diff was weeping but that was just a blocked breather I was told, and I've replaced the radiator. The car has almost done 144k kms and I've probably put about 10k kms on myself.

Edited by M35woah

Engines have become a lot more efficient, these things run wideband o2 correction... But it's still 3.5L in a 2 ton car...

Liquid gas conversion would be the go like Matt said.


:/ remap for fuel economy?

I'd be looking at probably a diesel wagon or an SV6 or something...

SV6 isn't going to be any better on fuel, nor is the NM35. Even the missus A4 1.8t only gets around 9L/hundred on the hwy.

My other concern is fuel economy. I used to get excellent economy out of my NM35 - just over 10L/100km around town assuming I was wearing my sensible pants and as low as 8L-9L/100km on the highway without air cond.

I think if I bought a PNM35 I'd be organising a remap for it so I'd be hoping that I would be able to get those sort of economy figures out of one.

SV6 isn't going to be any better on fuel, nor is the NM35. Even the missus A4 1.8t only gets around 9L/hundred on the hwy.

Just going on what Jasevr4 has stated what he got previously, and the SV6 is just going on redbook figures.

The figures that Jase stated put the PNM35 to shame, there is no way I can do 10L/100km around town unless freeway town.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...