Jump to content
SAU Community

Recommended Posts

My car produces a clicking or clunking noise whenever i change gears or take off from idle, if you take off very slowly you can't hear it but if you take off quicker you can hear it. Its coming from the rear end of the car, and its R33 series 1. Any help or advice appreciated. What could be the problem, has anyone else experienced this? Thanks.

Universal joint - it's a join that will move in "any" direction, and still maintain a solid connection. On a tailshaft, it's the bit that connects the shaft to the diff. As the diff can move (well, in non-IRS cars anyway) and so can the gearbox etc, the join must be flexible.

No doubt someone will have a pic floating around.

guys i had the same problem too.. when to two suspension specialists and still couldnt find anything wrong.. so i did a bit of investigating my self and found it to be my wires in the boot coming out of my subs and knocking against the body of my car.. i also found a pen in there as well as some screws lol... probably isnt the problem but worth having a look..?!?!

I have been to two different places to try and find the source of the clicking noise coming from the right rear of my car. Noone has been able to find it.

To a certain extent the car has always made the noise, and i have had the car for 4 years. Its nto the diff, fluids have been changed many times with no change, its not the uni joint as they have been inspected and found to be in better condition then aother cars in the workshop, and not susp as all my susp has been changed at on etime or another.... so i am at a loss to find the source of the clicking noise....oh and not lieky to be tools etc, as the time when it is easiest to hear is when pulling out of the pits with the concrete wall on the outside and the clicking noise reverberates off the pit wall, plus all the boot trim, spare wheel, jack etc is removed.

It could be anything, including the things i have listed as not being the source of the problem, only i couldnt be bothered throwing money at it when noone knows what it is....if you know the answer you could be the only one in the counthry that has fixed the prob. :(

Its one of those probs that haunts me :(

does it do it everytime you take off? could be just the brake pads moving on the pins, have similar click when i suddenly jump on the breaks... or the handbrake pads moving off...

just a thought

That noise will more than likely be driveline backlash. Not a major problem, just annoying. You can usually avoid making the noise with practice, and by being a bit smoother. And yes, you can do it with a button clutch :D

I suffer "driveline backlash" - when I push the clutch in suddenly - eg i was reversing out of a carpark and someone ran behind me - i get a loud clunking sort of noise. It feels painful for the driveline, what is suffering? Uni joints, diff?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sorry, are coilovers ACTUALLY ILLEGAL in NSW? They aren't in Vic, as long as they retain 70% of stock travel and the car is above 100mm off the ground. Does NSW actually have a law making coilovers actually illegal? RWC/Blue Slip/Engineering people not knowing the actual f**king laws boils my blood. Demand them to point to the documentation that states a coilover is illegal. (it may exist in NSW )
    • But seriously, can we ask for the results of the "tip a bottle of metho into a nearly empty tank" experiment?
    • Hang on. Let me get this straight. The desire is to have coilovers, BC in particular, to be MORE comfortable on Sydney roads than stock suspension? Well, that's obviously not right. BCs have crude damping design at the very best, and typically hard spring rates. BC stands for Billy Cart. And then, the desire is to put in some shitty old worn out stockers, to get it blue slipped and then put the BCs back in? And then.....what? Not worry about getting pulled up by the Plod? Because you seem to have raised a worry about paying for engineering (which actually does solve all your legality problems) and still getting pulled up.... but the only problem there is that if/when that happens you have to show your paperwork at the inspection station. Whereas, if you just swap in borrowed shitty old stockers to get it slipped now, and then you get defected in the future, you have to go find more shitty old stockers then too. You course of action looks like this set of options: Buy brand new stock type dampers, and springs. probably cost a bit more than $1k all up, but will last for the remaining life of the car. Put them in, pass inspection, drive on them forever more. Hell, they could even be really nice Bilsteins and Kings or other lower&stiffer springs if you wanted. Get the car engineered as is. ~$1k. Buy new Shockworks coilvers (or MCA) and also pay for engineering. You're spending a lot more here. But these will be the best things that you could drive around on.
    • Might be worthwhile hitting up Facebook's groups, I know most of them contain terrible people and scammers - however you might be able to find someone that's in Sydney with factory suspension you could purchase and/or hire. Just do not send any form of money anywhere, in person cash only.
×
×
  • Create New...