Jump to content
SAU Community

Recommended Posts

As the title states, pulled up at a set of lights a few days ago and she popped backfired and died.

The crank kept spinning and ripped the timing belt to pieces, pulled the head off and every exhaust valve is bent and stuck open and a few on the intake side slightly bent, does anyone have a clue what would cause this. Will be getting a valve tool and pulling them out over the weekend. I just can't understand why, on the brighter side the pistons still seem pretty good with only light scraping in the grooves.

Link to comment
https://www.sau.com.au/forums/topic/429249-rb20det-exhaust-valves-stuck/
Share on other sites

Weakest link in that chain is definitely the belt. Blame that before blaming anything else. More importantly, because it was recently changed means that hands have recently been involved in the front end of the motor. So that means that something was either not put back right or something foreign was left in there are also possible causes for the belt to crap out.

This is true, it was done just before I bought the car, all up was about 18thou kms done. Bottom ends getting checked tonight, a mates got a reco head ready if I decide to go that way.

Mine also had titanium valve springs I'm assuming they'll still be sweet

And if the timing belt went first it should only have bent the open valves on both sides before it stalled. I just can't wrap my head around how all exhaust valves were open. Unless each valve bent 2 by 2 until it locked up and stripped the belt

You can bend them all. The cams keep spinning a short time with nothing but inertia to power them. As valves get bent they unload the lifters and then stay away from the cam lobes so you get all sorts of chaos going on. After a couple of turns of the cam the whole lot are stuffed and then the motor stops and it's all over!

^ were finding solutions lol

I'm thankful this all happened at idle not full boost my hks cams came out completely unscaved, we also thought the lifters may have seized and caused said chaos aswell. Ill know some more when I actually get the valve tool and pull the rest of it apart I guess

I don't think so, still had good pressure before in carked it. And there was oil throughout the cams. The whole motor/box is coming out anyway fora thorough inspection before I put it back or buy anything.

RB power- I'm a nsw kid, and my mates got a head in his shed ready if I need it. Appreciate the offer though champ

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
    • Shock tower brace is in +5Kw....LOL  
×
×
  • Create New...