Jump to content
SAU Community

Recommended Posts

Thanks leesh, hip is a little better so squat is a bit easier now

Birds, I only look in the mirror at the top or bottom of the rep, but yeah you've got a point.

I workout by myself and generally try to time my sessions so the gym is fairly empty so it will be a little difficult getting a video.

I feel fine during the rep and my movement is strict, no jerking and such, pretty sure I'm just being paranoid because that was the first time anybody has ever said anything to me about form

  • 4 weeks later...

Went to the gym yesterday after a couple weeks off, shit session and had to drop the weights back a bit.

Not surprised though considering that I have done absolutely no exercise other than a couple light jogs for the last couple weeks.

My eating and sleeping habits have been shit too.

14/10/2013

Pretty disappointing session, but better than sitting around doing nothing

Squat: 1x10 bar

1x8 @40

3x5 @60

Pullups 5 + 5 negs

Row: 1x10 bar

3x5 @40

Dips: 3,5,5 First time I've done these in probably a year, shoulder felt fine which was surprising.

A good stretch after a workout helps me avoid doms, that and a protein shake straight away with some creatine in it.

My interest in supps is purely recovery and they work for me in that regard.

Thanks, I definitely need to put in more effort I think.

Today is just active recovery, I get really bad doms after having even a short break

I'd like to share something that may prove helpfull . Doms is a normal part of life.It's different to injuries or mobility issues, which deserve some attention. Make it irrelevant to your training. Don't give it any thought, it doesn't deserve it. Accept it an move on. Paying attention to it holds you back and you may find excuses not to train or lose motivation.

Don't try to avoid doms it's a waste of time. Just train correctly and accept it may or may not occur.

In the past I would sometimes not get doms and then sometimes I'd get doms along with pain that seemed like severe tendonitis , I held to instruction and trained anyway. I learnt it's nothing to worry about.

Hopefully that helps.

Edited by rev210

Dan: I usually stretch and foam roll after a workout. I don't take any supplements, nothing against them, just a personal preference

Thanks rev, I know doms is nothing to worry about haha it was more of an off hand remark so I wasn't just posting one sentence. I definitely know the difference between doms and actual injury pain haha

I'm still doing what I had planned for today, which is a jog, some body weight exercises on whatever I find depending where I end up (park, gym, etc), stretches and mobility work.

My diet isn't great, but it's not too bad I guess. Could definitely be improved.

19/10/2013

Should be back to where I was by next session.

Squat: 1x8 Bar

1x8 @40

3x5 @65

Deadlift: 1x8 @40

1x8 @80

1x5 @100

Row: 1x8 Bar

3x5 @40

3x5 @45 More volume here because I was getting my form checked, it's all good :)

Pullups: 4..Meh

Thanks, still got alot to improve, will get there eventually.

21/10/2013

Squat: 1x8 Bar

1x8 @40

4x5 @70 Some guy commented that I have a good squat, nice and deep. So that was good to hear.

Mp: 1x8 Bar

1x8 @20

1x5 @30

1x2 @30

1x3 @30

1x2 @30 These really need more work

Row: 1x8 @30

4x5 @50

Edited by r31slpr

Pretty much repeated my last workout today.

27/10/2013

Squat: 1x8 Bar

1x8 @50

3x5 @70

Row: 1x8 @40

3x5 @50

Deadlift: 1x8 @80

1x5 @100

1x5 @110

Dips: 3x5 A little improvement here, no where near what I used to do though

Nice DL'ing and good job on the MP.

MP is a tough motion when you're getting back into it. I managed to strain a shoulder at 30kg when I started out doing it.

Take it slow and steady, Rev can also comment on some excellent assistance exercises to make sure the shoulders are healthy. His suggestions helped me fix my strain.

Thanks dan, surprisingly Mp doesn't aggravate my shoulder like other pressing does.

I think its getting better because I had to stop dips all together and now I can do them without pain, whereas before I couldn't even hold my weight on the bars without pain.

I've got no doubt my numbers will go up once I become more consistent, been missing lots of sessions due to a few reasons.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I do believe from context he is talking about a S0/S1 R33 RB25 with associated ECU and Wiring for that, and a manual gearbox into a R34 N/A Auto. I don't have the knowledge of all the pinouts and such but my gut feeling from doing my own conversion is to use as much of the R33 stuff that you can. The "car" wiring is quite seperate from the "Engine" wiring when all things are considered. The only things to truly consider 99% of the time is the cluster, reverse lights and potentially disabling the 'not in P/N' immobilizer circuit.
    • A realistic expectattion of how long it has to last also comes down to.... when do you think you will be banned from registering and driving old petrol powered shitters? It's 27 years since that thing was built. It probably rusted out 15 years ago. It was probably repaired and looked OK for another 10. If you do a similarish bodge job now, or perhaps slightly better with some actual rust conversion and glassing, then.... get another 10-15 years out of it, after which you'll only be permitted by the CCP to drive electric cars manufactured in their Shenzen zone anyway. 
    • Let me assume that the concern over a manual ECU is that the NeoDET that you have was an auto and has an auto ECU. That ECU will not be a problem, but you WILL have to Nistune it. And you would have to Nistune it even if you had a manual ECU, because the turbo ECUs will shit the bed if they do not have all the things that they were told they have to have, to be happy. The big one being the TCS CU, which you won't have in your car. Anyway, with an auto ECU (which I have running my originally auto NeoDET in an R32) Nistune allows you to put in a Stagea image which doesn't panic about the absent TCS, and allows you to override a whle bunch of other annoyances that would otherwise see the check engine light on 100% of the time. Also, you can't wind up the power very far on the stock NeoDET ECUs without Nistune, because the boost sensor gets in the way. Nistune allows you to push that problem much further up the dial. Do you even have the boost sensor with the engine? Without it, you are SOL and will need an aftermarket ECU (or to find a sensor somewhere, god knows where). I can't tell you what the wiring loom differences are in a 34. But what Duncan said above needs to be considered. When you say "loom", does that include the transmission loom? Because you will need to swap out the auto tranny loom for the equivalent manual loom, and get rid of the neutral/park start interlock (basically hot wire it).
    • I have had the r3c in for years now, maybe close to 7 years and it has never missed a beat, anyone can drive it. Super easy to drive around town, the hotter it gets does get a little hard but it holds the power easy as 
    • Shit thing to find eh? I guess the big issue is that whatever "fix" you do now, it might slow the rust down but won't fix it. I just wanted to add that in no way is fixing sheet metal in 3 dimensions the place to start with welding....that is a pro only job because its too hard to work out where things should be, let alone doing a clean enough job that it can look OK and still be strong too.  I needed to get a new rear quarter panel on the GTR and it took a pro weeks to get the old one off cleanly, new one on in the right place and looking somewhat like it should have with most of the previous connecting panels in place. Gluing a couple of bits of metal together with a welder in the garage is doable, but that is totally different to doing panel  replacement
×
×
  • Create New...