Jump to content
SAU Community

Recommended Posts

Yeah the back plastics on mine have plenty of cracks.

That's the reason it keeps coming back.

Tried to use silicone to seal up the cracks but it's not working.

I'll have another check this weekend and see what I can do before purchasing them.

Yeah the back plastics on mine have plenty of cracks.

That's the reason it keeps coming back.

Tried to use silicone to seal up the cracks but it's not working.

I'll have another check this weekend and see what I can do before purchasing them.

Epoxy not silicon :thumbsup:

Okay so the timeline starts again.

So after fixing the radiator, rolling the guards, getting the coilovers installed & putting on the rims.

It was here! NATS! WOOOO FARKEN HOOO KARNTS!

I hadn't slept in days because I was so excited.

Got myself a helmet and loaded up the car with some spares just in case.

Wvyj1Qw.jpg?1

I pulled up at the nats and found myself a little spot next to Mat Geeteetee and unloaded the car.

Met all my whores from whore town who I hadn't met in person.

Who knew Tailor Made was going to have such a homo haircut haha!

Zc9hzxT.jpg?1

Got the car out on the track and had an amazing time! Didn't have any gauges so I took it fairly easily.

1-2 hot laps and then a cool down lap, this worked well for me and the car didn't give me any issues.

I walked away with a 1.26 which was an okay time for the first time ever tracking the car.

dQjCjYl.jpg?1

_DSC3807_small.jpg

_DSC3808_small.jpg

I participated in the track day and the airport drags.

The airport drags was the best fun I have ever had and I think I got like 10 runs or more.

My best time was a 14 seconds flat I do believe.

y4V8hAu.jpg?1

On the very last run I thought I would give it my all and spent a fair bit on the limited.

Got halfway down the track the battery light came on and the temps shot through the roof.

Popped the bonnet and coolant was everywhere.

After closer inspection I had shredded my fan belt.

Mat was kind enough to go pick me one up and help me change it on the side of the road.

Rob pulled over and had a chat while using his hazards to make sure we didn't get hit

uqJKP6x.jpg?1

This is where I would like to give a shout out to Rob for his amazing effort.

After getting home I found that we had driven off on Rob and he got back in his car and had a flat battery.

He spent a few hours on the side of the road waiting for the NRMA as we boosted off into the distance.

(Rob I still owe you that drink or 10 mate)

yinHyMb.jpg?1

sw5aQvP.jpg

Big thanks to Matt, Carmon & Rob for helping out and keeping company.
I would have been stuck there without you guys.

Ohh and here is a model shot of Josh (Tailor Made) & myself inside the car.

7Ops4as.jpg?1

After the weekend was over I cruised home with old mate Trozzle

bPRthGa.jpg?1

NATS! WOOOO FARKEN HOOO KARNTS! Indeed! :D

Twas my pleasure and in reality, my Battery was only 2 months off Death anyway, so not your fault. :thumbsup:

But I'll still Have those Beers ya flamin mongrel! I'll keep these Winkers for Ransom til you make good. :laugh:

And yeah... Mat - "34GeeTeeTee" Legend. :thumbsup:

So I cleaned my throttle body a few months ago.

Not thinking I actually cleaned off the sealant around the butterfly.

Could this be the cause of high idle?

How would people go about adding the sealant back and what would you use

So I cleaned my throttle body a few months ago.

Not thinking I actually cleaned off the sealant around the butterfly.

Could this be the cause of high idle?

How would people go about adding the sealant back and what would you use

I did the same thing and my car idles at 2000rpm now. Makes driving slow nice and easy as you don't have to accelerate.

The sealant is some special crap you have to buy if you really want to fix it. I'm pretty sure it's from tomei.

Source of your whistle?

could possibly be

This could be the reason that you only get it on a certain vacuum

Because it is in a certain position that causes the whistle.

Now just to find out what product I can use.

Some say gasket sealant but I don't want it to get sucked into my engine.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...