Jump to content
SAU Community

Recommended Posts

It is the slippy sly way. :/

Hell, I have a spare Dash Cluster with 100,000ks on it and I have 200,000 on the one in the car.

Even swapping it over within my ownership doesn't feel right to me, let alone pulling a shifty for a sale.

Dont judge a book by its cover this cars drives betteter than some 33 with 100kms smooth as a babys butt! ive driven this car k sport coilovers, and all the right basic mods done by the man himself john from Trojan, esp fitted the highflow turbo, original matts no marks on the roof linning etc the car has original paint exept for bonnet and spoiler! straight tidy, boost comes on nicely tuned to 220 watts esp were very impressed with the out put! (no blow back) serviced accordingly very important hence its awesome condition! compression test would prove this car!

and also the guy selling the car is a top bloke all you have to do is meet him and his car to find out

Hi Guys,

So of late I've started thinking of selling the skyline as I'm looking for a ute.

Wondering what sort of money I could be chasing?

Car has been serviced religiously and mods have all been done professionally done.

It runs perfectly and the only reason for the sale is I want a ute

Car is:

R33 S2 skyline Silver body in perfect condition

30x xxx kms

5 spoke 18inch mags

GCG Hi Flow Turbo

TRUST turbo back exhaust

Coilovers

Heavy Duty clutch

Running safely on 11psi and dyno'd at 226rkw (turbo can handle a lot more)

Any thoughts on what I should be asking for would be appreciated.

I'll work on finding some pictures!

Thanks Angus!!!!

Appreciate the advice and help! Will be coming to you for my ute! :yes:

I've added an image of the Dyno sheet after ESP did the turbo. Its doing 225rkw on 11psi.

just a note that I'm the 2nd aus owner of this car and I bought it when it had just over 100k so I put the 200k on it.

All the work that has been done has receipts from Trojan / ESP, etc

I'm not in any rush but by the same token if I sold it quickly id be happy :)

post-30818-0-73531500-1376730950_thumb.jpg

300,000 is a lot of k's. You could probably get between 5-8k for it, if everything is in good working order. Difficult to say without looking at it and it also depends on the buyer. They might not be that attentive and just see the 225kw car.

Did a dealer give you a trade in price?

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • 9" wheels are a little too wide for a RWD 32. They can fit. People have put R33 GTR wheels on 32s for years and years. But they are a very tight squeeze. This has been known for about 30 years. As I said - there is no difference between a 17 and an 18 in terms of what will fit. The rolling diameter needs to stay about the same as stock - not very much larger. If you increase that, you will start to have problems. If you increae rolling diamater at the same time as yo increase width, you will have problems earlier. as 9" wheels are pushing the boundaries already, you would need to be careful with tyre choice. I would put 8.5s on the front of mine, but would expect problems with 9s.
    • post up screen shots of your injector tables
    • Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
    • I have an elite 2500 running an adapter harness on an rb25de neo r34. I took the butterfly out and removed all that junk. But I also went Plus+t at the same time. The butterfly thing works in reverse to the boost solenoid on the Gtt if that makes sense
    • yeh they are 235/45/17 up front and 255/40/17 in the rears. I still didn't get my answer if i can fit a 18x9 up front. I want to get 4 of this and see if they will fit before committing as they didn't see an 18x8 as an option but there is a 18x9.5 also.   Enkei RS05-RR 18x9 35mm ET 5x114.3 75.0 Bore Matte Gunmetal Wheel
×
×
  • Create New...