Jump to content
SAU Community

Recommended Posts

All parts from a 1994 Series 1 R33 gtst 4 door I wrecked, cheap cheap!!

Many parts are pick up only unless stated otherwise so read the description carefully.

Sedan boot lid $20. Pick up only.

IMG_9993_zps1f1c63b7.jpg

Rear hubs $20 each (includes uprights). Pick up only.

IMG_9057_zps175ae95c.jpg

Front and rear sway bars $20 each. Pick up only.

Rear cradle (bare cradle) $20 each Pick up only.

Non abs brake master and booster $20 each. Can post.

IMG_9065_zps19a3bb4a.jpg

Door cards- no switches included $20 each. Pick up only

Very good condition except one small blemish as shown in photo.

IMG_9853_zps6d440a34.jpg

IMG_9857_zps86117490.jpg

IMG_9855_zps96138922.jpg

Rear 4 door window switches $20 each (or $40 for all three, driver's switch sold). Can post.

IMG_9858_zpsc03737f7.jpg

A pillar trims $20 pair. Pick up only.

Doors $20 each. Pick up only.

Rear bar, suit respray $20. Pick up only.

IMG_9987_zps800187ad.jpg

Door lock kit - doors, ignition, boot with key $50. Can post.

Steering rack $20. Pick up only.

IMG_9063_zpsacce18d7.jpg

Indicator and wiper stalks $10 each. Can post.

Steering column $20. Pick up only.

Kick panels $10 each. Can post.

Dash plastic surround (pick up only) $20

IMG_9080_zps2a446fc7.jpg

Dash pad $20 pick up only

IMG_9084_zps43191f0f.jpg

Sun visors $10 each. Can post.

IMG_9010_zps3ebb5d79.jpg

Front guard mudflaps $10 pair. Can post.

IMG_9005_zps766b5988.jpg

Sold/unavailable:

Motor and gearbox, headlights, airbox, clutch master, bonnet, passenger guard, under stereo pocket, engine fan, speedo cluster, lower control arms, factory stereo, centre console, stock suspension, castor rods, cat temp sensor, inner guard liners, fog lights, climate control, shifter surround, front bar and grille, AFM, ECU, drivers window switch, side mirrors, stock rims, diff, rear brakes, radiator, interior wiring loom, steering column plastics, handbrake, stock intercooler and piping, rear vision mirror, interior lights, front hubs.

How much for the plastic steering column surround thingy, pending it has no holes or blemishes? Posted to 2444 Port Macquarie?

Let me know :)

pm sent :)

is the front fender the same as for a coupe or are they different? sorry if noob question.

pretty sure they are the same

much chance you'd have a stock or a not too loud exhaust catback for a r33 sedan? also if anyone knows if the front end (guards, front bar, bonnet headlights) are the same between sedan and coupe??

much chance you'd have a stock or a not too loud exhaust catback for a r33 sedan? also if anyone knows if the front end (guards, front bar, bonnet headlights) are the same between sedan and coupe??

nah exhaust sold already, not 100% sure on the front end parts but I only have the driver's guard anyway.

Wouldn't happen to have a speedo drive for RB25 gearbox mate?

i may have one on a stag front cut i have, need to check for ya to make sure it's in good nick

pm me if you want it and i'll check it out

  • Like 1

Hey Mate you dont have the space saver spare wheel by any chance?

Also interested in the radiator support/ boot latch with the horns attached

nah no spacesaver, bonnet latch/rad support is still available

pm me for bank details

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeah I've had too many issues with knock off's on the BMW's. I don't want to do a job twice or more because the parts are shit.
    • I read this and thought "ah! I will do this scissor jack on the tow point thing!" I just use my floor/low profile/costco jack and lift the car up by the tow hook itself, then slide jack stands under. Never thought about using scissor into floor jack combo :p
    • Well, my new WMI system took much longer to finalize. I actually missed my dyno appointment last Friday and lost my 150$ deposit. I'll be going back in the next week or two.  To sum it up. I only kept the AEM tank from my old setup. I replaced the AEM pump with a higher flow/pressure ProMeth 30GPH pump. I also swapped over to a 6AN low pressure feed line to the pump from the tank. There's also a pressure switch you cannot see on the pump high pressure line.    This is feeding 6x 200CC direct port nozzles and 1x 500CC Pre Throttle body nozzle. All fittings are Swagelok, because well why not. I also have a 300PSI pressure sensor up front.    I now have my Haltech ECU controlling everything. I start my pump with a basic relay at 5PSI and deadhead it. I then PWM a 3000CC methanol Injector to control flow starting around 10psi. The pressure switch in the trunk, along with my tank level are safeties before I ever get to 10PSI, and then I use my pressure sensor upfront as a secondary safety to cut the WMI and corrections in case the injector blocks or a line ruptures.  Wish me luck on the dyno!    
    • So, I'm back with bad news. There's no jack long enough on this planet that will reach the front subframe. If by some chance there is, it would weigh 200lb's.  I purchased a long reach jack... The damn thing weighted 120lb's and was massive. Didn't even come close, was still short at least a foot. It was a pain, but I brought it back. Next I decided HA! No problem, I'll get an Extra long reach jack. Well, I couldn't lift the box... It must have weighed 160LB's and luckily there was an open box in store. I took measurement and was still nowhere close.  Sadly I've lost hope and have accepted defeat. 
    • Thanks for that tip, niZmO_Man. I think the battery is OK. It's quite a new one, but I'll check. Last time I needed a new battery, everything electronic was fine, except that there wasn't enough current to turn over the starter. I decided to order one of the partial AV system translation CDs from Car Audio Workshop in NZ. That might have some effect, or help me diagnose the date problem. 🤞
×
×
  • Create New...