Jump to content
SAU Community

Recommended Posts

Hi Guys,

Had my car which is a R32 GTR for nearly two years and got a haltech ecu installed last week. Drove it home from the shop and seemed ok but have just got back from a drive today and there seems to be a flat spot or miss. When I get up it the car goes fine no miss nothing. But when im just cruising there seems to be a flat spot around the 2000 rpm mark. Spits and farts a bit until the revs pick up. Just curious if it has something to do with the tuning? Never done that with the stock ecu but is now. Should I call up the mechanic who installed and tune it and be asking him to rectify it? Just thought id get your opinions before giving him a call.

Cheers

Ryan

Link to comment
https://www.sau.com.au/forums/topic/430424-flat-spot/
Share on other sites

Did he take it for a road tune after the dyno run? Usually these light load issues only pop up on the street.

These things happen, as long as he fixes it free as you have already paid him for a tune... If you have issues still, it may mean he simply can't tune. (block or copy/paste tuner)

Link to comment
https://www.sau.com.au/forums/topic/430424-flat-spot/#findComment-6975037
Share on other sites

Im really not sure Scotty if he did or not. He had the car over a week and also put a heavy duty clutch in. So for the cash i spent there I sort of expect it to be perfect. I'll see what he says tomorrow. I wont be paying any more to fix it as it never done that with the stock ecu. If he has an issue fixing it or refuses to I'll be happy to share.

Link to comment
https://www.sau.com.au/forums/topic/430424-flat-spot/#findComment-6975074
Share on other sites

Mmm yeah when you dyno tune you just can't get to the really light loads. Its not the tuners fault as alot of tuners believe the dyno is the be all end all. My car was tuned in dyno for a good 4hrs. On very very light throttle the car does cannot gain rpm. The mix is too lean it just coughs and splutters. Abit of throttle enrichment should do the trick. What id do is tell the tuner to grab his laptop and jump in the car while you drive and have him adjust the cells and throttle enrichment. Shouldn't take long at all with a savvy tuner.

Link to comment
https://www.sau.com.au/forums/topic/430424-flat-spot/#findComment-6975417
Share on other sites

  • 3 weeks later...

Can any of you guys recommend me a tuner in brisbane please.. I've been back to the mechanic and car still runs like crud. He did get in with the laptop and played around but not much changed. Find it hard to understand how they can hand back a car running like that after spending close to $5000 in their shop. I wont be going back there. I've talked to Mercury Motorsports and am thinking about taking it there for a re-tune. Just curious on other tuners out there you guys can recommend who have good previous track records.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/430424-flat-spot/#findComment-7010334
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The downside of this is when you try to track the car, as soon as you hit ABS you get introduced to a unbled system. I want to avoid this. I do not want to bleed/flush/jack up the car twice just to bleed the f**kin car.
    • But again, the engineers said your cast aluminium would be fine based on the load that would be stretching that section. Same load stretching the bolts in a flex (not the twist), with a much smaller cross sectional area than the original part you've broken. It's why you'd need to be using higher strength bolts, but that's just making up for the strength you lose with less area...
    • I am truly amazed someone on this planet was able to cycle the pump using a scan tool. I've always ghetto cycled them on Nissan 90s shit boxes by slamming the brakes and pulling the handbrake to agitate the rear wheels enough to cause a speed difference
    • I didn't actually try it at the time but a Launch X431 with the appropriate software licenses/upsell will have the ABS bleed function. The Consult II you can still find some old sets of equipment but they're really, really expensive:   
    • Well I'll start by saying I'm not an engineer. I am going to go with the KiwiCNC ones.  They are made of 7050 alloy have good fillets and radius.  The material alone is in the order of double the strength and fatigue resistance - Those bolts, once torqued correctly place most of the load at the flat face of the mating surface - the 'stretch' you're talking about through torqueing them up would be far more than the extra stretch 'load' placed on them from a steering input or bump. (in my opinion) so I doubt they would flinch.    - but again "not an engineer".      oh and I don't think stitch welding 7050 is a good idea, likely just weaken the material (from what I read)
×
×
  • Create New...