Jump to content
SAU Community

Recommended Posts

Brakes are on, Rims are on. Looks angry as f**k with the 123S's, Brake lines are on the way, Bit of a dabble in the engine bay here and there, Tidy up bits and pieces and we should be ready to fire up! Stay tuned

Not just yet, I'm trying to get most of the useless crap done at the end, Mainly I want it started and moving under its own power rather then being pushed around. Will post pics when they do go on eventually

Was supposed to be ready in May, So not sure what's going on.Havn't had the time to go in and find out. lately due to work, As far as im aware it still only needs fuel pump, fuel reg, and fluids to start..

Went in Saturday, Another 3 weeks is when work recommences on my project. So I imagine it'll only take a week to finish it all up to tuning stage, theres f**k all to be done really. So getting excited

I can't believe you're still waiting ...

I pulled out before Racewars here in Perth back in April. So he had to take on other projects in the meantime to keep work flowing through unhindered, No ones fault but my own really. Still extremely busy so it's getting around 8-10 hours on it a week from here. Better then nothing but it's getting very close.

hey mate nice build do you know if you can use a na neo cam agle sensor on the gtr 32 head.

it would be nice if you could get a good picture of the aac hoses they have used its all a bit confusing to many pipes ha.

  • 1 month later...

Couple update photos, Fair bit has been done, Mainly Radiator, Killswitch/Isolator in bay, Fuel Reg, Fan shrouding, all bits and pieces and finishing touches up , Engine bay is just about complete, So very close. Couple porn shots to keep people excited. Forgot to get a picture after we popped the new Nissan GTR Ornament plate I bought on the engine covers, It absolutely just sets the finishing touch off in the bay.
sJMlW7B.jpg
RPK08lU.jpg

g7X5R9P.jpg
X2kFhwU.jpg

  • 2 weeks later...

Well we had her started up for the first time, And got oil pressure etc, Everything went perfect started up first shot. Once I figure out how to get my videos up on the forums I'll chuck a short clip I got

Here have some more pics. Street tested today, Car still kicks over first shot on e85 everytime, Even after not being started for a week which is awesome. Hoping to get some run in k's on it sometime early in the new year when I'm not yolofifo'd , still working on getting the startup vid on here, But cant seem to embed a facebook video tried everything. :|

UCJM80v.jpg
4ADr7kc.jpg
7sjZKZl.jpg
DWmkBxe.jpg
BmyrbgX.jpg
0yxXowE.jpg
VnsqgIj.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...